433 research outputs found
Image and color recognition using amorphous silicon p-i-n photodiodes
Large area hydrogenated amorphous silicon single and stacked p-i-n structures with low conductivity doped layers are proposed as monochrome and color image sensors. The layers of the structures are based on amorphous silicon alloys (a-Si(x)C(1-x):H). The current-voltage characteristics and the spectral sensitivity under different bias conditions are analyzed. The output characteristics are evaluated under different read-out voltages and scanner wavelengths. To extract information on image shape, intensity and color, a modulated light beam scans the sensor active area at three appropriate bias voltages and the photoresponse in each scanning position ("sub-pixel") is recorded. The investigation of the sensor output under different scanner wavelengths and varying electrical bias reveals that the response can be tuned, thus enabling color separation. The operation of the sensor is exemplified and supported by a numerical simulation
Enhanced short wavelength response in laser-scanned-photodiode image sensor using an a-SiC : H/a-Si : H tandem structure
We report in this paper the recent advances we obtained in optimizing a color image sensor based on the laser-scanned-photodiode (LSP) technique. A novel device structure based on a a-SiC:H/a-Si:H pin/pin tandem structure has been tested for a proper color separation process that takes advantage on the different filtering properties due to the different light penetration depth at different wavelengths a-SM and a-SiC:H. While the green and the red images give, in comparison with previous tested structures, a weak response, this structure shows a very good recognition of blue color under reverse bias, leaving a good margin for future device optimization in order to achieve a complete and satisfactory RGB image mapping. Experimental results about the spectral collection efficiency are presented and discussed from the point of view of the color sensor applications. The physics behind the device functioning is explained by recurring to a numerical simulation of the internal electrical configuration of the device
A two terminal optical signal and image processing p-i-n/p-i-n image and colour sensor
A two terminal optically addressed image processing device based on two stacked sensing/switching p-i-n a-SiC:H diodes is presented. The charge packets are injected optically into the p-i-n sensing photodiode and confined at the illuminated regions changing locally the electrical field profile across the p-i-n switching diode. A red scanner is used for charge readout. The various design parameters and addressing architecture trade-offs are discussed. The influence on the transfer functions of an a-SiC:H sensing absorber optimized for red transmittance and blue collection or of a floating anode in between is analysed. Results show that the thin a-SiC:H sensing absorber confines the readout to the switching diode and filters the light allowing full colour detection at two appropriated voltages. When the floating anode is used the spectral response broadens, allowing B&W image recognition with improved light-to-dark sensitivity. A physical model supports the image and colour recognition process
Colour filtering in a-SiC : H based p-i-n-p-i-n cells: A trade-off between bias polarity and absorption regions
A large area colour imager optically addressed is presented. The colour imager consists of a thin wide band gap p-i-n a-SiC:H filtering element deposited on the top of a thick large area a-SiC:H(-p)/a-Si:H(-i)/a-SiC:H(-n) image sensor, which reveals itself an intrinsic colour filter. In order to tune the external applied voltage for full colour discrimination the photocurrent generated by a modulated red light is measured under different optical and electrical bias. Results reveal that the integrated device behaves itself as an imager and a filter giving information not only on the position where the optical image is absorbed but also on it wavelength and intensity.
The amplitude and sign of the image signals are electrically tuneable. In a wide range of incident fluxes and under reverse bias, the red and blue image signals are opposite in sign and the green signal is suppressed allowing blue and red colour recognition. The green information is obtained under forward bias, where the blue signal goes down to zero and the red and green remain constant. Combining the information obtained at this two applied voltages a RGB colour image picture can be acquired without the need of the usual colour filters or pixel architecture. A numerical simulation supports the colour filter analysis
Breast cancer targeted photothermal therapy mediated by hyaluronic acid functionalized reduced graphene oxide
The use of graphene-based nanomaterials in cancer photothermal therapy (PTT) is an emerging
alternative to the currently available cancer treatments. In this regard, reduced graphene oxide
(rGO) has been widely explored for cancer PTT due to its excellent photothermal capacity.
However, rGO has some limitations, such as low colloidal stability and water insolubility, as well
as absence of targeting capacity towards cancer cells. Herein, rGO produced by an
environmentally- friendly method was functionalized with an amphiphilic polymer based on
hyaluronic acid (HA-rGO) through hydrophobic-hydrophobic interactions for application in
targeted breast cancer PTT. The functionalization improved rGO colloidal stability and
cytocompatibility towards normal and breast cancer cells, as well as conferred targeting capacity
towards CD44 overexpressing breast cancer cells. In addition, the photothermal effect mediated
by HA-rGO upon laser irradiation reduced breast cancer cellsâ viability. Overall, HA-rGO
demonstrated a great potential for being used on-demand and selective treatment of breast cancer
cells.Rita Lima-Sousa and CĂĄtia G. Alves acknowledge funding from the grant UBI Santander/Totta.info:eu-repo/semantics/publishedVersio
Combining intention and emotional state inference in a dynamic neural field architecture for human-robot joint action
We report on our approach towards creating socially intelligent robots, which is heavily inspired by recent experimental findings about the neurocognitive mechanisms underlying action and emotion understanding in humans. Our approach uses neuro-dynamics as a theoretical language to model cognition, emotional states, decision making and action. The control architecture is formalized by a coupled system of dynamic neural fields representing a distributed network of local but connected neural populations. Different pools of neurons encode relevant information in the form of self-sustained activation patterns, which are triggered by input from connected populations and evolve continuously in time. The architecture implements a dynamic and flexible context-dependent mapping from observed hand and facial actions of the human onto adequate complementary behaviors of the robot that take into account the inferred goal and inferred emotional state of the co-actor. The dynamic control architecture was validated in multiple scenarios in which an anthropomorphic robot and a human operator assemble a toy object from its components. The scenarios focus on the robotâs capacity to understand the humanâs actions, and emotional states, detect errors and adapt its behavior accordingly by adjusting its decisions and movements during the execution of the task.The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was possible in part by the funding of research grants from the Portuguese Foundation for Science and Technology (grant numbers SFRH/BD/48527/2008, SFRH/BPD/71874/2010, SFRH/BD/81334/2011), and with funding from FP6-IST2 EU-IP Project JAST (project number
003747) and FP7 Marie Curie ITN Neural Engineering Transformative Technologies NETT (project number 289146).info:eu-repo/semantics/publishedVersio
External perceptions of successful university brands
Branding in universities has become an increasingly topical issue, with some institutions committing substantial financial resources to branding activities. The particular characteristics of the sector present challenges for those seeking to build brands and it therefore seems to be timely and appropriate to investigate the common approaches of those institutions perceived as having successful brands.
This study is exploratory in nature, seeking to investigate how successfully UK universities brand themselves, whether they are distinct and if the sector overall communicates effectively. This is approached through examining the perspective of opinion formers external to universities but closely involved with the sector â a key stakeholder group in UK higher education
Overall, the researchâs exploratory nature aims to further the debate on effective branding in UK higher education.
The findings and conclusions identify some issues surrounding university branding activity; most UK universities were considered to be distinct from one another, but few were seen to have real fully formed brands. Although a number of institutions that were seen as having more âsuccessfulâ brands were identified, it was argued that whilst many UK universities communicate their brand well enough to key stakeholders, they fail to consistently do this across all audiences. It was also suggested that UK universities may concentrate on areas of perceived immediate strategic importance (in terms of branding) to an extent where others are neglected
A genetic linkage map of the hermaphrodite teleost fish Sparus aurata L.
The gilthead sea bream (Sparus aurata L.) is a marine fish of great importance for fisheries and aquaculture. It has also a peculiar sex-determination system, being a protandrous hermaphrodite. Here we
report the construction of a first-generation genetic linkage map for S. aurata, based on 204 microsatellite
markers. Twenty-six linkage groups (LG) were found. The total map length was 1241.9 cM. The ratio
between sex-specific map lengths was 1:1.2 (male:female). Comparison with a preliminary radiation hybrid
(RH) map reveals a good concordance, as all markers located in a single LG are located in a single RH
group, except for Ad-25 and CId-31. Comparison with the Tetraodon nigroviridis genome revealed a considerable number of evolutionary conserved regions (ECRs) between the two species. The mean size of
ECRs was 182 bp (sequence identity 60â90%). Forty-one ECRs have a known chromosomal location in the
pufferfish genome. Despite the limited number of anchoring points, significant syntenic relationships were
found. The linkage map presented here provides a robust comparative framework for QTL analysis in S.
aurata and is a step toward the identification of genetic loci involved both in the determination of economically important traits and in the individual timing of sex reversal
Biosynthesis of antioxidant xanthan gum by Xanthomonas campestris using substrates added with moist olive pomace
Moist olive pomace (MOP) is a high moisture content by-product of the olive oil industry.
Managing this recalcitrant residue (transport, storage, and drying) is a priority demanding
investment in finding alternative valorisation routes. In this context, the biosynthesis of
xanthan gum (XG) incorporating MOP in the substrate (0.0 %, 5.0 %, 10.0 %, 15.0 %, 20.0 %,
25.0 %, 30.0 % and 50.0 %) to induce bacterial stress was attempted. XG biosynthesis yield
was quantified, and the product was characterised by structural analysis (FTIR), thermal
behaviour (TG), rheology and antioxidant capacity. Relative to the control (sample with no
added MOP), a significant increase in XG biosynthesis was found for concentrations up to
30.0 % MOP. In particular, for XG produced with 15 % MOP, a 50.91 % (p < 0.0001) increase
was achieved, together with 395.78 % for viscosity. In general, XG produced with MOP
presence showed antioxidant activity, a value-added property, especially for applications
in the food, pharmaceutical and cosmetic areas. The results indicated that the stress
imposed by the MOP induced a microbial response leading to XG production increase,
structural and viscosity modifications, and antioxidant properties incorporation. Overall,
this work points out a new MOP application contributing to the sustainability of the olive
oil productive chain from a biobased circular economy perspective.The authors are grateful to the Foundation for Science and Technology (FCT, Portugal) for financial support through national funds FCT/MCTES (PIDDAC) to CIMO (UIDB/00690/2020 and UIDP/00690/2020), and SusTEC (LA/P/0007/2021). Project OleaChain âSkills for sustainability and innovation in the value chain of traditional olive groves in the Northern Inland of Portugalâ (NORTE-06-3559-FSE-000188) for P.J.L. Crugeira and A.I.G. Rodrigues contracts. FCT for the PhD research grant of H.H.S. Almeida (SFRH/BD/148124/2019). National funding by FCT, P.I., through the institutional scientific employment program contract of A. Santamaria-Echart.info:eu-repo/semantics/publishedVersio
- âŠ