Physical parameters activating electrical signal distortions in polluted soils

Laboratory investigations and field measurements show that the electrical behaviour of polluted soils is strongly non-linear at low frequencies. This phenomenon can be related to the class and the amount of pollutants. To measure this non-linearity, we used only monochromatic voltage waveform as input signal and analysed the current signals at first by means of the classical spectral analysis. In particular, the Total Harmonic Distortion % (THD%) and the Harmonic Distortion %(?) measure the non-linearity level and identify the frequency interval where the non-linear electrical behaviour is activated. This frequency interval can be related to the pollutant molecular size. Open interpretative problems were the following: 1) phase localization of the signal deformation; 2) «local» amplitude of the applied signal activating the distortion, and 3) numerical fit of the distortion. We employed the wavelet analysis to study the phenomenon. The wavelet technique breaks up a signal into shifted and scaled versions of the original wavelet, which is a waveform of limited duration. These features of the wavelets allow us to obtain current components that can be interpreted on the bases of a real physical meaning. By using the wavelet analysis, we obtained the phase localization of the ‘oscillations’ of the details and consequently the phase and amplitude of the applied signal. The sum of nine details provides a good numerical fit of the distorted signal. Starting from the wavelet analysis, we determined the physical conditions activating each distortion, testing some parameters on experimental data. The parameters that resulted most significant are the phase ? of the distortion activation and the product Vin?t (Vs) (where ?t is the time interval corresponding to the said ? and Vin is the integral tension applied to the sample on ?t). The latter parameter is in a very good agreement with field data of Advanced Monochromatic Spectral Induced Polarization (AMSIP) and restricts the physical interpretative hypotheses of distorted signals that are measured in the field. Typical experimental results will be shown as examples

DSP-Based Stepping Motor Drivers for the LHC Collimators

The control electronics of the LHC collimators stepping motors will be located in radiation safe zones up to 800 meters far from the motors. With such cable lengths the standard chopping drivers do not work properly because of the voltage losses on the cable and even more because of the high cable capacitance. The capacitance in fact produces a ringing phenomenon on the driver feedback current that limits the control chopping frequency to the point of being incompatible with the tight EM emissions requirements of the LHC tunnel. In some cases the feedback loop may even become unstable and the driver would fail. The problem was solved by accurately modeling the overall motor-cable system taking into account non-linearities due to hysteresis and eddy currents and by designing an adaptive digital controller, self-tuning to the real cable length. The controller will aim at increasing the chopping frequency to reduce the spectral density of the emissions and at damping the oscillations of the feedback current to avoid instability. In this paper the model of the motor-cable system as well as the digital controller are described. Particular attention is devoted to the hardware implementation based on a TI Cx2000 DSP

The PS 80 MHz cavities

As part of the preparation of the PS as injector for LHC, two new 80 MHz cavities have been designed and built at CERN. Bunches spaced by 25 ns and less than 4 ns long are required at injection into t he SPS. The bunch spacing is obtained with a 40 MHz system installed in the PS in 1996, but the nominal small bunch length will only be obtained with the 80 MHz systems producing a total of 600 kV. Th ese systems also have the capability to accelerate leptons in the PS, providing a total of 400 kV with high duty cycle (25 %). The mechanical design is similar to that of the 40 MHz cavity with many c ommon parts, but cooling water circuits had to be added. The cavity is equipped with an efficient, pneumatically operated, coaxial short-circuit. The power coupling loop has the form of a wide strip t o minimize the ratio of self to mutual inductance. It has a DC insulation permitting multipactor suppression by a bias voltage. The final amplifier is mounted directly onto the cavity. A fast RF feedb ack with a loop gain of 44 dB reduces the Q to about 100. Higher-order-mode dampers designed and built at TRIUMF have been installed

Insegnare nell'era INVALSI

Il forum ha come scopo fare il punto sulle problematiche che condizionano i processi di apprendimento/insegnamento nello scenario delineato dall'introduzione delle prove INVALS

Physical parameters activating electrical signal distortions in polluted soils

Laboratory investigations and field measurements show that the electrical behaviour of polluted soils is strongly non-linear at low frequencies. This phenomenon can be related to the class and the amount of pollutants. To measure this non-linearity, we used only monochromatic voltage waveform as input signal and analysed the current signals at first by means of the classical spectral analysis. In particular, the Total Harmonic Distortion % (THD%) and the Harmonic Distortion %(?) measure the non-linearity level and identify the frequency interval where the non-linear electrical behaviour is activated. This frequency interval can be related to the pollutant molecular size. Open interpretative problems were the following: 1) phase localization of the signal deformation; 2) «local» amplitude of the applied signal activating the distortion, and 3) numerical fit of the distortion. We employed the wavelet analysis to study the phenomenon. The wavelet technique breaks up a signal into shifted and scaled versions of the original wavelet, which is a waveform of limited duration. These features of the wavelets allow us to obtain current components that can be interpreted on the bases of a real physical meaning. By using the wavelet analysis, we obtained the phase localization of the oscillations of the details and consequently the phase and amplitude of the applied signal. The sum of nine details provides a good numerical fit of the distorted signal. Starting from the wavelet analysis, we determined the physical conditions activating each distortion, testing some parameters on experimental data. The parameters that resulted most significant are the phase ? of the distortion activation and the product Vin?t (Vs) (where ?t is the time interval corresponding to the said ? and Vin is the integral tension applied to the sample on ?t). The latter parameter is in a very good agreement with field data of Advanced Monochromatic Spectral Induced Polarization (AMSIP) and restricts the physical interpretative hypotheses of distorted signals that are measured in the field. Typical experimental results will be shown as examples

The Linear Behaviour of Pathogen Strain of Bacillus anthracis A0843 in Anthrax Subcutaneous Challenge on Rabbit Model

Background: The pathogen strain of Bacillus anthracis A0843, isolated during an anthrax outbreak occurred in Italy, belongs to the Cluster A1a genotype 3. The authors show its activity underlining that the regular behaviour could make it useful as a reference strain for subcutaneous challenge in rabbit model for anthrax vaccines efficacy test. Italy doesn't use Ames strain because the restrictive measures, imposed after the bioterroristic events occurred in October 2001 in USA, reduced the movements of pathogen agents between reference laboratories in the world. It is necessary to adopt new rules that favour the security and the regularity of the research. Method: This study was done, during 3 years, on 50 New Zeeland rabbits, males and females, with a weigh between 1.200 and 1500 grams. The site of injection was back in the space between the two scapulae. It was used 20 LD50 (about 40.000 spores) of the pathogen strain according to the European Pharmacopoeia. Results: It was observed that anthrax begins to kills after 48 hours from the infection. At 72 hours the percentage of survival is 56,66%; at 96 hours is 30%. It was observed that two animals that survived after 120 hours from infection didn't die. Conclusion: The LD50 of B. anthracis strain A0843 in rabbit is 2.000 spores, less virulent then Ames strain which is characterized of a LD50 of about 1.200 spores. The standard amount of 20 DL50 (about 40.000 spores) of B. anthracis strain A0843 injected in subcutaneous area in rabbits shows a linear behaviour. The higher mortality is observed between 72 and 96 hours. All the animals died within 120 hours from the infection. None of the infected animals survived over this time and we consider it the survival line of anthrax subcutaneous challenge in rabbit. Technical support: Angela Aceti and Nicola Nigro Founds: Ricerca Corrente 2005 of Ministry of Health of Italy This research was done in according to the Decreto legislativo n.116/92 on animal welfar

Wide Band Gap Devices and Their Application in Power Electronics

Power electronic systems have a great impact on modern society. Their applications target a more sustainable future by minimizing the negative impacts of industrialization on the environment, such as global warming effects and greenhouse gas emission. Power devices based on wide band gap (WBG) material have the potential to deliver a paradigm shift in regard to energy efficiency and working with respect to the devices based on mature silicon (Si). Gallium nitride (GaN) and silicon carbide (SiC) have been treated as one of the most promising WBG materials that allow the performance limits of matured Si switching devices to be significantly exceeded. WBG-based power devices enable fast switching with lower power losses at higher switching frequency and hence, allow the development of high power density and high efficiency power converters. This paper reviews popular SiC and GaN power devices, discusses the associated merits and challenges, and finally their applications in power electronics

Lipidomics of the edible brown alga wakame (Undaria pinnatifida) by liquid chromatography coupled to electrospray ionization and tandem mass spectrometry

The lipidome of a brown seaweed commonly known as wakame (Undaria pinnatifida), which is grown and consumed around the world, including Western countries, as a healthy nutraceutical food or supplement, was here extensively examined. The study was focused on the characterization of phospholipids (PL) and glycolipids (GL) by liquid chromatography (LC), either hydrophilic interaction LC (HILIC) or reversed-phase LC (RPLC), coupled to electrospray ionization (ESI) and mass spectrometry (MS), operated both in high and in low-resolution mode. Through the acquisition of single (MS) and tandem (MS/MS) mass spectra more than 200 PL and GL of U. pinnatifida extracts were characterized in terms of lipid class, fatty acyl (FA) chain composition (length and number of unsaturations), and regiochemistry, namely 16 SQDG, 6 SQMG, 12 DGDG, 5 DGMG, 29 PG, 8 LPG, 19 PI, 14 PA, 19 PE, 8 PE, 38 PC, and 27 LPC. The FA (C16:0) was the most abundant saturated acyl chain, whereas the monounsaturated C18:1 and the polyunsaturated C18:2 and C20:4 chains were the prevailing ones. Odd-numbered acyl chains, i.e., C15:0, C17:0, C19:0, and C19:1, were also recognized. While SQDG exhibited the longest and most unsaturated acyl chains, C18:1, C18:2, and C18:3, in the sn-1 position of glycerol, they were preferentially located in the sn-2 position in the case of PL. The developed analytical approach might pave the way to extend lipidomic investigations also for other edible marine algae, thus emphasizing their potential role as a source of bioactive lipids

Music Teacher Education at a Liberal Arts College

In 2012, a committee at a small Midwestern liberal arts college, Lake Forest College, embarked on a journey to create a music education teacher licensure major. Drawing from narrative inquiry, this article reports how the dean of faculty, education department chair, music department chair, and assistant professor of music/music education coordinator collaborated on a curricular creation. Findings from this process included (a) the created music education major, (b) each participant’s rationale for wanting the new music education major, (c) valued components of the music education major, and (d) unique elements of a music education major at a liberal arts college. Implications from this experience could be valuable for music education programs at small liberal arts colleges, those involved in university/school partnerships such as professional development schools, and those looking to advocate for their music education programs across campus