Sexual and Reproductive Health Policies For Adolescents in Foster Care: A Literature Review

Introduction: Adolescents are engaging in risky sexual behaviors, which result in high rates of STD infection and teenage pregnancy. These maternal and child health outcomes are indicative of the status of the sexual and reproductive health of adolescents and are of public health concern. Background: Adolescents in foster care represent a sub-group of adolescents at high risk for teenage pregnancy and STD infection, due to the early onset of sexual activity, lower rates of condom usage, and intercourse with multiple sex partners. This population is medically underserved, although federal and state laws mandate Medicaid (health insurance) provision for children placed in foster care; however, policy plays a large role in how such laws are practiced. Method: A literature review using seven databases and two search engines identified research/evaluation reports (with no time constraints) related to sexual and reproductive health policies for youth in foster care, utilizing 17 Boolean terms. Results: Twelve relevant articles were identified. A 1987 article documented the existence of sexual and reproductive health policies for children in foster care in only nine states, and the other studies discussed practice and policy recommendations for improving the maternal and child health outcomes of adolescents in foster care. Discussion: There is a lack of recent literature that documents the existence of sexual and reproductive health policies as they relate to youth in foster care, which suggests a gap of knowledge about the practice, research and policies governing sexual and reproductive health services. Furthermore, child welfare workers have expressed an increased need for explicit, written policies about their roles and responsibilities in the provision of sexual and reproductive health education and services. Conclusion: There is a pressing need to dictate policies and appropriate funding, in support of explicitly meeting the sexual and reproductive health needs of adolescents in foster care. Multiple stakeholders need to foster communication and collaboration, in order to effectively research, develop and implement policies to better meet the sexual and reproductive health needs of adolescents in foster care. Further research on existing health policies, written guidance and additional training is necessary to enable practitioners to better address this public health need

Accelerated weathering of cementitious matrix for the development of an accelerated laboratory test of biodeterioration

International audienceCement based materials are porous, may contain organic adjuvants, and thus possesses an important primary bioreceptivity. To preserve constructions from fungal colonization and to act efficiently against fungal biodeterioration, it is necessary to have a better understanding of biodeterioration mechanisms and its effects on materials properties. An accelerated laboratory test which allows us to compare the growth of three fungal strains and the aesthetic biodeterioration of a cementitious matrix was developed. As the surface pH of the fresh cement specimen is too high to allow fungal growth (pH ~12), accelerating weathering of the matrix, consisting of the combination of carbonation and leaching, was performed to reduce the matrix alkalinity. XRD analyses and SEM observations pointed out that the matrix surface is progressively covered by a calcium carbonate layer as the weathering increases. Results point out that the microbial growth occurs on matrix with a surface composition more like a limestone than a cementitious one

Effect of the Chemical Composition of Building Materials on Algal Biofouling

International audienceThe main cause of aesthetical deterioration of outdoor exposed building materials is the colonization by microorganisms. This phenomenon depends on factors such as geographical situation, environmental conditions and surface state of the substrate. Several researches have been devoted to the study of the effect of porosity, roughness and surface treatment on the biofouling of building materials. However, none of them has addressed the influence of cement composition. The main objective of this study is thus to highlight the influence of the composition of the material on its biocolonization by algae. The green alga Klebsormidium flaccidum was chosen because of its representativeness in France. It is indeed the species the most frequently identified and isolated from samples taken on sites. In order to characterize the influence of the composition of building materials on their biofouling, the behavior of mortars prepared with two types of Portland cement and two types of calcium aluminates cement is studied. The biofouling is followed by measuring the covering rate thanks to image analysis. This work is realized both on samples exposed outdoor and on samples tested in a laboratory bench. Obtained results prove that the composition of cementitious materials is a determining factor

Phytostabilisation d'un site pollué par les éléments traces : opération pilote et pérennité du traitement

National audienceGrâce à l'utilisation combinée de plantes et d'agents immobilisants, la phytostabilisation assistée limite les risques associés à un sol contaminé en réduisant la biodisponibilité des polluants. Le rôle des plantes est de réduire le lessivage et l'érosion. En Europe et dans le monde, de nombreux sites ont déjà été phytostabilisés avec succès. Cependant, peu de projets de phytostabilisation associent une surface et une durée d'expérimentation suffisantes pour établir l'efficacité sur le long terme et en conditions réelles d'une telle pratique pour la gestion d'un site pollué. La nécessité de conduire des opérations pilotes sur une longue durée a été ainsi mise en avant par la communauté scientifique. L'objectif de ce projet mené sur un dispositif pilote mis en place en 2002 est d'estimer l'efficacité dans le temps d'une phytostabilisation assistée appliquée à un sédiment pollué par les éléments traces (Cd, Zn, Pb, Cu, As). Les paramètres suivis dans cette étude sont liés aux plantes initialement semées, aux espèces végétales venues spontanément coloniser le dispositif, aux agents immobilisants utilisés et aux caractéristiques physico-agronomiques de la matrice polluée. Une synthèse des résultats obtenus sur 7 années de suivi sera présentée lors du colloque

Metal immobilization and soil amendment efficiency at a contaminated sediment landfill site: a field study focusing on plants, springtails, and bacteria

International audienceMetal immobilization may contribute to the environmental management strategy of dredged sediment landfill sites contaminated by metals. In a field experiment, amendment effects and efficiency were investigated, focusing on plants, springtails and bacteria colonisation, metal extractability and sediment ecotoxicity. Conversely to hydroxylapatite (HA, 3% DW), the addition of Thomas Basic Slag (TBS, 5% DW) to a 5-yr deposited sediment contaminated with Zn, Cd, Cu, Pb and As resulted in a decrease in the 0.01 M Ca(NO(3))(2)-extractable concentrations of Cd and Zn. Shoot Cd and Zn concentration in Calamagrostis epigejos, the dominant plant species, also decreased in the presence of TBS. The addition of TBS and HA reduced sediment ecotoxicity and improved the growth of the total bacterial population. Hydroxylapatite improved plant species richness and diversity and decreased antioxidant enzymes in C. Epigejos and Urtica dïoica. Collembolan communities did not differ in abundance and diversity between the different treatments

An in-situ and laboratory study of the effect of the intrinsic properties of mortars on their potential bioreceptivity

International audienceThis study aims to clarify the effect of mortar intrinsic properties (porosity, roughness and carbonation level) on its ability to biofouling. Two scales experimental tests, an accelerated fouling in laboratory and a natural fouling in the real-world, were set-up. The first one was conducted in a closed device allowing a periodic sprinkling of an algal suspension on the samples surface. The outdoor test samples were exposed in a park at Grenoble (France). The colonization rate of the sample surface was evaluated by image analysis. The results show that the impact of each intrinsic parameter is quite different as function of the test. The porosity has no influence on the algal colonization of the samples exposed in indoor whereas a high porosity seems to increase slightly the bioreceptivity of ones exposed outdoor. The roughness, in both tests, promoted the microorganisms attachment and so their colonization. However, the discrimination of roughness grades is higher in the laboratory test than in the in-situ one. The surface pH significantly influences on the accelerated biofouling but not on the in-situ one. These dissimilarities result from the difference in experimental configurations of the two tests. Thus the laboratory test should be adjusted to be more suitable and to allow an extrapolation of results

Influence of the intrinsic characteristics of mortars on their biofouling by pigmented organisms: Comparison between laboratory and field-scale experiments.

International audienceBiodeterioration of mortars by the photosynthetic microorganisms is affected by their intrinsic properties such as porosity, roughness and surface pH. The influence of these parameters was examined using an accelerated fouling test in laboratory and a natural fouling test in the real-world ( in situ). Based on color measurement and image analysis, the impact of each intrinsic parameter was evaluated. The results differed from a scale to the other one. No influence of porosity was measured on the algal colonization rate in the laboratory test whereas, a high porosity seemed to increase slightly the bioreceptivity of the mortars exposed outdoor. The roughness, in both tests, promoted the microbial colonization. However, the discrimination of roughness grades was better in the laboratory test than in the in situ one. The surface pH influenced remarkably on the accelerated biofouling test but not on the in situ one. These dissimilarities resulted from the differences in experimental configurations of the two tests

Nurturing lifelong learning in communities through the National University of Lesotho: prospects and challenges

This paper analyses one aspect of a pan-African action research project called ITMUA (Implementing the Third Mission of Universities in Africa). This particular paper draws on the data from that project to explore the National University of Lesotho’s contribution to lifelong learning in its communities. It provides background information on the ITMUA initiative and analyses interview and focus group responses to two case studies in terms of their contribution to lifelong learning. It uses, as its analytical framework, a modified version of Mbigi’s African perspective on the four De Lors’ ‘pillars’, by adding a fifth pillar, courtesy of Torres. The paper argues that community engagement is a two-way process between universities and their wider constituencies with opportunities for mutual lifelong learning. But there are also challenges of understanding and process which must be addressed if the full range of these lifelong learning pillars is to be accommodated within African contexts. The paper provides an introduction to the history of community engagement in Africa as a university mission, followed by a brief discussion of lifelong learning within African perspectives. After describing the particular context of Lesotho, the concept of community service and community engagement in contemporary African contexts introduces the action research project and the case studies. The final part of the paper presents and discusses the research findings

Studies on Bioflocculant Production by Arthrobacter sp. Raats, a Freshwater Bacteria Isolated from Tyume River, South Africa

A bioflocculant-producing bacteria was isolated from Tyume River in the Eastern Cape Province, South Africa and identified by 16S rRNA gene nucleotide sequence to have 91% similarity to Arthrobacter sp. 5J12A, and the nucleotide sequence was deposited in GenBank as Arthrobacter sp. Raats (accession number HQ875723). The bacteria produced an extracellular bioflocculant when grown aerobically in a production medium containing glucose as sole carbon source and had an initial pH of 7.0. Influences of carbon, nitrogen and metal ions sources, as well as initial pH on flocculating activity were investigated. The bacteria optimally produced the bioflocullant when lactose and urea were used as sole sources of carbon and nitrogen respectively with flocculating activities of 75.4% and 83.4% respectively. Also, the bacteria produced the bioflocculant optimally when initial pH of the medium was 7.0 (flocculating activity 84%), and when Mg2+ was used as cation (flocculating activity 77%). Composition analyses indicated the bioflocculant to be principally a glycoprotein made up of about 56% protein and 25% total carbohydrate

Use of ecotoxicity test and ecoscores to improve the management of polluted soils: case of a secondary lead smelter plant

International audienceWith the rise of sustainable development, rehabilitation of brownfield sites located in urban areas has become a major concern. Management of contaminated soils in relation with environmental and sanitary risk concerns is therefore a strong aim needing the development of both useful tools for risk assessment and sustainable remediation techniques. For soils polluted by metals and metalloids (MTE), the criteria for landfilling are currently not based on ecotoxicological tests but on total MTE concentrations and leaching tests. In this study, the ecotoxicity of leachates from MTE polluted soils sampled from an industrial site recycling lead-acid batteries were evaluated by using both modified Escherichia coli strains with luminescence modulated by metals and normalized Daphnia magna and Alivibrio fischeri bioassays. The results were clearly related to the type of microorganisms (crustacean, different strains of bacteria) whose sensitivity varied. Ecotoxicity was also different according to sample location on the site, total concentrations and physico-chemical properties of each soil. For comparison, standard leaching tests were also performed. Potentially phytoavailable fraction of MTE in soils and physico-chemical measures were finally performed in order to highlight the mechanisms. The results demonstrated that the use of a panel of microorganisms is suitable for hazard classification of polluted soils. In addition, calculated eco-scores permit to rank the polluted soils according to their potentially of dangerousness. Influence of soil and MTE characteristics on MTE mobility and ecotoxicity was also highlighted