429 research outputs found
Backpropagation-Based Cooperative Localization of Primary User for Avoiding Hidden-Node Problem in Cognitive Networks
Cognitive radio (CR) is a technology to implement opportunistic spectrum sharing to improve the spectrum utilization. However, there exists a hidden-node problem, which can be a big challenge to solve especially when the primary receiver is passive listening. We aim to provide a solution to the hidden-node problem for passive-listening receiver based on cooperation of multiple CRs. Specifically, we consider a cooperative GPS-enabled cognitive network. Once the existence of PU is detected, a localization algorithm will be employed to first estimate the path loss model for the environment based on backpropagation method and then to locate the position of PU. Finally, a disable region is identified taking into account the communication range of both the PU and the CR. The CRs within the disabled region are prohibited to transmit in order to avoid interfering with the primary receiver. Both analysis and simulation results are provided
Fast Detection Method in Cooperative Cognitive Radio Networks
Cognitive Radio (CR) technology improves the utilization of spectrum highly via opportunistic spectrum sharing, which requests fast detection as the spectrum utilization is dynamic. Taking into consideration the characteristic of wireless channels, we propose a fast detection scheme for a cooperative cognitive radio network, which consists of multiple CRs and a central control office. Specifically, each CR makes individual detection decision using the sequential probability ratio test combined with Neyman Pearson detection with respect to a specific observation window length. The proposed method upper bounds the detection delay. In addition, a weighted K out of N fusion rule is also proposed for the central control office to reach fast global decision based on the information collected from CRs, with more weights assigned for CRs with good channel conditions. Simulation results show that the proposed scheme can achieve fast detection while maintaining the detection accuracy
Synthesis And Characterization Of CaF2:Yb,Er(CORE) /CaF2(SHELL) Up-Conversion Nanoparticles
Master'sMASTER OF ENGINEERIN
Forecast of cross-correlation of CSST cosmic shear tomography with AliCPT-1 CMB lensing
We present a forecast study on the cross-correlation between cosmic shear
tomography from the Chinese Survey Space Telescope (CSST), and CMB lensing from
Ali CMB Polarization Telescope (AliCPT-1) in Tibet. We generate the correlated
galaxy lensing and CMB lensing signals from the Gaussian realizations based on
the inputted auto- and cross-spectra. As for the error budget, we consider the
CMB lensing reconstruction noise based on the AliCPT-1 lensing reconstruction
pipeline; the shape noise of the galaxy lensing measurement; CSST photo-
error; photo- bias; intrinsic alignment effect. The AliCPT-1 CMB lensing
mock data are generated according to two experimental stages, namely the "4
modules*yr" and "48 modules*yr" cases. We estimate the cross-spectra in 4
tomographic bins according to the CSST photo- distribution in the range of
. After reconstructing the pseudo-cross-spectra from the
realizations, we calculate the signal-to-noise ratio (SNR). By combining the 4
photo-z bins, the total cross-correlation SNR (AliCPT-1 "4
modules*yr") and SNR (AliCPT-1 "48 modules*yr"). Finally, we study
the cosmological application of this cross-correlation signal. Due to the
negative contribution to the galaxy lensing data, the exclusion of intrinsic
alignment in the template fitting will lead to roughly a
increasement in but without changing the value. For AliCPT-1
first and second stages, the cross-correlation of CSST cosmic shear with CMB
lensing give and and
and , respectively.Comment: 17 pages, 10 figure
Effects of temperature on photosynthetic performance and nitrate reductase activity in vivo assay in Gracilariopsis lemaneiformis (Rhodophyta)
Gracilariopsis lemaneiformis is an economically-valued species and widely cultured in China at present. After being acclimated to different growth temperatures (15, 20, 25, and 30 degrees C) for 7 days, the relative growth rate (RGR), nitrate reductase activity, soluble protein content and chlorophyll a fluorescence of G. lemaneiformis were examined. Results show that RGR was markedly affected by temperature especially at 20 degrees C at which G. lemaneiformis exhibited the highest effective quantum yield of PSII [Y(II)] and light-saturated electron transport rate (ETRmax), but the lowest non-photochemical quenching. Irrespective of growth temperature, the nitrate reductase activity increased with the incubation temperature from 15 to 30 degrees C. In addition, the greatest nitrate reductase activity was found in the thalli grown at 20 degrees C. The value of temperature coefficient Q10 of alga cultured in 15 degrees C was the greatest among those of other temperatures tested. Results indicate that the optimum temperature for nitrate reductase synthesis was relatively lower than that for nitrate reductase activity, and the relationship among growth, photosynthesis, and nitrate reductase activity showed that the optimum temperature for activity of nitrate reductase in vivo assay should be the same to the optimal growth temperature
Mechanics of design and model development of CVC-plus roll curve
The mathematic model of CVC-Plus work roll curve is built. The ratio of the initial shifting value to the target crown is determined, and the mathematical model considering the relationship between the coefficients A2, A3, A4, A5 and is established. According to the theoretical analysis, the distance between the maximum or minimum point of the high order equivalent crown for work roll with CVC-plus roll curve and the rolling central point is the times of the roll barrel length. In general, the initial shifting value of the CVC-plus roll curve is not equal to the initial shifting value of the 3-order CVC roll curve . The coefficient A1 can also be obtained by optimizing the target function with minimizing the axial force
Effect of directional solidification rate on the microstructure and properties of deformation-processed Cu-7Cr-0.1Ag in situ composites
The influence of directional solidification rate on the microstructure, mechanical properties and conductivity of deformation-processed Cu-7Cr-0.1Ag in situ composites produced by thermo-mechanical processing was systematically investigated. The microstructure was analyzed by optical microscopy and scanning electronic microscopy. The mechanical properties and conductivity were evaluated by tensile-testing machine and micro-ohmmeter, respectively. The results indicate that the size, shape and distribution of second-phase Cr grains are significantly different in the Cu-7Cr-0.1Ag alloys with different growth rates. At a growth rate of 200 μm s-1, the Cr grains transform into fine Cr fiber-like grains parallel to the pulling direction from the Cr dendrites. The tensile strength of the Cu-7Cr-0.1Ag in situ composites from the directional solidification (DS) alloys is significantly higher than that from the as-cast alloy, while the conductivity of the in situ composites from the DS alloys is slightly lower than that from the as-cast alloy. The following combinations of tensile strength, elongation to fracture and conductivity of the Cu-7Cr-0.1Ag in situ composites from the DS alloy with a growth rate of 200 μm s-1 and a cumulative cold deformation strain of 8 after isochronic aging treatment for 1 h can be obtained respectively as: (i) 1067 MPa, 2.9% and 74.9% IACS; or (ii) 1018 MPa, 3.0%, and 76.0% IACS or (iii) 906 MPa, 3.3% and 77.6% IACS
- …