Life Cycle Assessment of A Hydrocarbon-based Electrified Cleaning Agent

The electrified cleaning agent requires a moderate volatilization rate, low ozone-depleting substances value, non-flammable, non-explosive and other characteristics. This study performed a whole life cycle assessment on a hydrocarbon-based electrified cleaning agent. The life cycle model is cradle-to-grave, and the background data sets include power grid, transportation, high-density polyethylene, chemicals, etc. The analysis shows that the global warming potential (GWP) of the life cycle of 1 kg of electrified cleaning agent is 2.08 kg CO2 eq, acidification potential (AP) is 9.49E-03 kg SO2 eq, eutrophication potential (EP) is 1.18E-03 kg PO43-eq, respirable inorganic matter (RI) is 2.13E- 03 kg PM2.5 eq, ozone depletion potential (ODP) is 4.91E-05 kg CFC-11 eq, photochemical ozone formation potential (POFP) is 2.89E-02 kg NMVOC eq, ionizing radiation-human health potential (IRP) is 3.16E-02 kg U235 eq, ecotoxicity (ET) is 2.69E-01 CTUe, human toxicity-carcinogenic (HT-cancer) is 4.32E-08 CTUh, and human toxicity-non-carcinogenic (HT-non cancer) is 2.31E-07 CTUh. The uncertainty of the results is between 3.46-9.95%.The four processes of tetrachloroethylene production, D40 solvent oil production, tetrachloroethylene environmental discharge during product use, and electricity usage during product disposal have substantial effects on each LCA indicator, so they are the focus of process improvement. Changes in power consumption during production and transportation distance of raw materials have little effect on total carbon emissions. Compared with the production process of single-solvent electrified cleaning agent tetrachloroethylene and n-bromopropane, the production of the electrified cleaning agent developed in this study has its own advantages in terms of carbon footprint and other environmental impact indicators. Carbon emissions mainly come from the power consumption of each process, natural gas production and combustion, and other energy materials for heating. It is recommended to use renewable raw materials instead of crude oil to obtain carbon credits based on geographical advantages, and try to use production processes with lower carbon emissions, while the exhaust gas from the traditional production process is strictly absorbed and purified before being discharged

Process Design of Microalgae Slurry Pump

Microalgae are a renewable source of dietary supplements, bioactive compounds, and potential energy. Once harvested, the microalgal medium is dewatered to form a slurry for downstream processing. This article outlines a process design for pumping the microalgae slurry. The pump requirements for delivering the Chlorella slurry with 5, 10 or 20 wt% solids at one tonne per hour (1,000 kg/h) and 10 bar were calculated. The 5 wt% microalgae slurry is a Newtonian fluid with a viscosity of 1.95 mPa×s. The 10 wt% and 20 wt% microalgae slurries are non-Newtonian fluids, whose viscosity depends on the shear rate (g). The viscosity of 10 wt% and 20 wt% microalgae slurries is 1.504 (g = 50 s-1)/1.155 (g = 100 s-1) and 1.844 (g = 50 s-1)/1.219 (g = 100 s-1) mPa×s, respectively. The pump power requirements are mainly governed by the delivery pressure. The effect of the pipe length and the number of elbows is negligible. The effective power of the pump is calculated as 0.267-0.275 kW. To fulfill this duty, a ZGB type single-stage single-suction centrifugal slurry pump can be selected, which would provide enough shear rate to reduce the viscosity of the microalgae slurry and give required shaft power. Citation: Li, J., Qu, Y., Gong, Y., Yang, C., Yang, B., Liu, P., Zhang, B., and Ding, Y. (2020). Process Design of Microalgae Slurry Pump. Trends in Renewable Energy, 6(3), 234-244. DOI: 10.17737/tre.2020.6.3.0012

Green Refining of Waste Lubricating Oil: A China Perspective

Presently, many regeneration processes of waste lubricating oil, such as catalytic hydrogenation, are available. However, some of these processes are highly costly and not suitable for Chinese economic conditions, and some may produce contaminated impurities such as acid slag, which cannot meet environmental protection requirements. This study aims to develop a green process for the regeneration of waste lubricating oil into a base oil, which should meet the requirements of green chemistry, have the characteristics of simple operation, low cost, less pollution and high recovery rate, and turn wastes into renewable resources. The new process developed via this research has three stages. First, mechanical and large particle impurities in the waste lubricating oil were removed by pretreatment. Second, most of the colloid and asphaltene were removed by thermal extraction and sedimentation. Finally, the activated bleaching earth was used to further purify the waste lubricating oil. The performance evaluation of the finally obtained lubricating base oil conformed to the standard of the HVI-100 lubricating oil. The total recovery rate of the process was about 63.5%.Citation: Wu, J., Li, B., Wang, W., Yang, S., Liu, P., Yang, C., and Ding, Y. (2019). Green Refining of Waste Lubricating Oil: A China Perspective. Trends in Renewable Energy, 5, 165-180. DOI: 10.17737/tre.2019.5.2.008

Effects of vertebral number variations on carcass traits and genotyping of Vertnin candidate gene in Kazakh sheep

Objective The vertebral number is associated with body length and carcass traits, which represents an economically important trait in farm animals. The variation of vertebral number has been observed in a few mammalian species. However, the variation of vertebral number and quantitative trait loci in sheep breeds have not been well addressed. Methods In our investigation, the information including gender, age, carcass weight, carcass length and the number of thoracic and lumbar vertebrae from 624 China Kazakh sheep was collected. The effect of vertebral number variation on carcass weight and carcass length was estimated by general linear model. Further, the polymorphic sites of Vertnin (VRTN) gene were identified by sequencing, and the association of the genotype and vertebral number variation was analyzed by the one-way analysis of variance model. Results The variation of thoracolumbar vertebrae number in Kazakh sheep (18 to 20) was smaller than that in Texel sheep (17 to 21). The individuals with 19 thoracolumbar vertebrae (T13L6) were dominant in Kazakh sheep (79.2%). The association study showed that the numbers of thoracolumbar vertebrae were positively correlated with the carcass length and carcass weight, statistically significant with carcass length. To investigate the association of thoracolumbar vertebrae number with VRTN gene, we genotyped the VRTN gene. A total of 9 polymorphic sites were detected and only a single nucleotide polymorphism (SNP) (rs426367238) was suggested to associate with thoracic vertebral number statistically. Conclusion The variation of thoracolumbar vertebrae number positively associated with the carcass length and carcass weight, especially with the carcass length. VRTN gene polymorphism of the SNP (rs426367238) with significant effect on thoracic vertebral number could be as a candidate marker to further evaluate its role in influence of thoracolumbar vertebral number

A multiyear assessment of air quality benefits from China’s emerging shale gas revolution: Urumqi as a case study

China is seeking to unlock its shale gas in order to curb its notorious urban air pollution, but robust assessment of the impact on PM2.5 pollution of replacing coal with natural gas for winter heating is lacking. Here, using a whole-city heating energy shift opportunity offered by substantial reductions in coal combustion during the heating periods in Urumqi, northwest China, we conducted a four-year study to reveal the impact of replacing coal with natural gas on the mass concentrations and chemical components of PM2.5. We found a significant decline in PM2.5, major soluble ions and metal elements in PM2.5 in January of 2013 and 2014 compared with the same periods in 2012 and 2011, reflecting the positive effects on air quality of using natural gas as a heating fuel throughout the city. This occurred following complete replacement with natural gas for heating energy in October 2012. The weather conditions during winter did not show any significant variation over the four years of the study. Our results indicate that China and other developing nations will benefit greatly from a change in energy source, that is, increasing the contribution of either natural gas or shale gas to total energy consumption with a concomitant reduction in coal consumption

Using datamining approaches to selectacupoints in acupuncture and Moxibustion for knee osteoarthritis

Background: Acupuncture and moxibustion are traditional Chinese medicine therapies commonly used to treat knee osteoarthritis (KOA). Although acupoint selection affects the effectiveness of acupuncture and moxibustion, the basic rules of acupoint selection are little understood and there is a lack of guidelines regarding prescription. In this study, we used data mining approaches to investigate the principles of acupoint selection and provide a framework for formulation prescription in acupuncture and moxibustion for clinical treatment of KOA.Materials and Methods: PubMed, Cochrane Library, Science Citation Index, Wanfang database, VIP database, and China National Knowledge Infrastructure were searched for randomized controlled clinical trials published in English or Chinese from January 1, 2009 to October 1, 2015 evaluating the effect of acupuncture and moxibustion on KOA. Databases were established. Frequency statistics and association rule were used to extract and analyze the data.Results: A total of 876 acupuncture prescriptions and 122 acupoints were included in the analysis. Acupoints were concentrated in acupoints of fourteen meridians. The most frequently used acupoints were Dubi (ST35), Neixiyan (EX-LE4), Yanglingquan (GB34), Xuehai (SP10), Liangqiu (ST34), Zusanli (ST36), Yinlingquan (SP9), and Ashi point. The most frequently used meridian was Stomach Meridian of Foot-Yangming. Acupoints were concentrated mainly in the lower limbs. 42 acupoint pairs occurred frequently, and the top acupoint pairing was Dubi (ST35) and Neixiyan (EX-LE4).Conclusion: Acupoint selection and formulation prescription should focus on locally affected areas, and follow the theory of meridians, which helps establish guidelines for acupuncture and moxibustion in KOA patients.Key words: acupuncture and moxibustion, knee osteoarthritis, acupoint, data mining technolog

USING DATA MINING APPROACHES TO SELECT ACUPOINTS IN ACUPUNCTURE AND MOXIBUSTION FOR KNEE OSTEOARTHRITIS

Background: Acupuncture and moxibustion are traditional Chinese medicine therapies commonly used to treat knee osteoarthritis (KOA). Although acupoint selection affects the effectiveness of acupuncture and moxibustion, the basic rules of acupoint selection are little understood and there is a lack of guidelines regarding prescription. In this study, we used data mining approaches to investigate the principles of acupoint selection and provide a framework for formulation prescription in acupuncture and moxibustion for clinical treatment of KOA. Materials and Methods: PubMed, Cochrane Library, Science Citation Index, Wanfang database, VIP database, and China National Knowledge Infrastructure were searched for randomized controlled clinical trials published in English or Chinese from January 1, 2009 to October 1, 2015 evaluating the effect of acupuncture and moxibustion on KOA. Databases were established. Frequency statistics and association rule were used to extract and analyze the data. Results: A total of 876 acupuncture prescriptions and 122 acupoints were included in the analysis. Acupoints were concentrated in acupoints of fourteen meridians. The most frequently used acupoints were Dubi (ST35), Neixiyan (EX-LE4), Yanglingquan (GB34), Xuehai (SP10), Liangqiu (ST34), Zusanli (ST36), Yinlingquan (SP9), and Ashi point. The most frequently used meridian was Stomach Meridian of Foot-Yangming. Acupoints were concentrated mainly in the lower limbs. 42 acupoint pairs occurred frequently, and the top acupoint pairing was Dubi (ST35) and Neixiyan (EX-LE4). Conclusion: Acupoint selection and formulation prescription should focus on locally affected areas, and follow the theory of meridians, which helps establish guidelines for acupuncture and moxibustion in KOA patients

Integrated transcriptomics and metabolomics analysis provide insight into the resistance response of rice against brown planthopper

IntroductionThe brown planthopper (Nilaparvata lugens Stål, BPH) is one of the most economically significant pests of rice. The Bph30 gene has been successfully cloned and conferred rice with broad-spectrum resistance to BPH. However, the molecular mechanisms by which Bph30 enhances resistance to BPH remain poorly understood.MethodsHere, we conducted a transcriptomic and metabolomic analysis of Bph30-transgenic (BPH30T) and BPH-susceptible Nipponbare plants to elucidate the response of Bph30 to BPH infestation.ResultsTranscriptomic analyses revealed that the pathway of plant hormone signal transduction enriched exclusively in Nipponbare, and the greatest number of differentially expressed genes (DEGs) were involved in indole 3-acetic acid (IAA) signal transduction. Analysis of differentially accumulated metabolites (DAMs) revealed that DAMs involved in the amino acids and derivatives category were down-regulated in BPH30T plants following BPH feeding, and the great majority of DAMs in flavonoids category displayed the trend of increasing in BPH30T plants; the opposite pattern was observed in Nipponbare plants. Combined transcriptomics and metabolomics analysis revealed that the pathways of amino acids biosynthesis, plant hormone signal transduction, phenylpropanoid biosynthesis and flavonoid biosynthesis were enriched. The content of IAA significantly decreased in BPH30T plants following BPH feeding, and the content of IAA remained unchanged in Nipponbare. The exogenous application of IAA weakened the BPH resistance conferred by Bph30.DiscussionOur results indicated that Bph30 might coordinate the movement of primary and secondary metabolites and hormones in plants via the shikimate pathway to enhance the resistance of rice to BPH. Our results have important reference significance for the resistance mechanisms analysis and the efficient utilization of major BPH-resistance genes