A construct with fluorescent indicators for conditional expression of miRNA

<p>Abstract</p> <p>Background</p> <p>Transgenic RNAi holds promise as a simple, low-cost, and fast method for reverse genetics in mammals. It may be particularly useful for producing animal models for hypomorphic gene function. Inducible RNAi that permits spatially and temporally controllable gene silencing in vivo will enhance the power of transgenic RNAi approach. Furthermore, because microRNA (miRNA) targeting specific genes can be expressed simultaneously with protein coding genes, incorporation of fluorescent marker proteins can simplify the screening and analysis of transgenic RNAi animals.</p> <p>Results</p> <p>We sought to optimally express a miRNA simultaneously with a fluorescent marker. We compared two construct designs. One expressed a red fluorescent protein (RFP) and a miRNA placed in its 3' untranslated region (UTR). The other expressed the same RFP and miRNA, but the precursor miRNA (pre-miRNA) coding sequence was placed in an intron that was inserted into the 3'-UTR. We found that the two constructs expressed comparable levels of miRNA. However, the intron-containing construct expressed a significantly higher level of RFP than the intron-less construct. Further experiments indicate that the 3'-UTR intron enhances RFP expression by its intrinsic gene-expression-enhancing activity and by eliminating the inhibitory effect of the pre-miRNA on the expression of RFP. Based on these findings, we incorporated the intron-embedded pre-miRNA design into a conditional expression construct that employed the Cre-loxP system. This construct initially expressed EGFP gene, which was flanked by loxP sites. After exposure to Cre recombinase, the transgene stopped EGFP expression and began expression of RFP and a miRNA, which silenced the expression of specific cellular genes.</p> <p>Conclusion</p> <p>We have designed and tested a conditional miRNA-expression construct and showed that this construct expresses both the marker genes strongly and can silence the target gene efficiently upon Cre-mediated induction of the miRNA expression. This construct can be used to increase the efficiency of making cell lines or transgenic animals that stably express miRNA targeting specific genes.</p

Assessment of Potential Risks of Dietary RNAi to a Soil Micro-arthropod, \u3cem\u3eSinella curviseta\u3c/em\u3e Brook (Collembola: Entomobryidae)

RNAi-based genetically engineered (GE) crops for the management of insect pests are likely to be commercialized by the end of this decade. Without a workable framework for conducting the ecological risk assessment (ERA) and a standardized ERA protocol, however, the utility of RNAi transgenic crops in pest management remains uncertain. The overall goal of this study is to assess the risks of RNAi-based GE crops on a non-target soil micro-arthropod, Sinella curviseta, which could be exposed to plant-protected dsRNAs deposited in crop residues. Based on the preliminary research, we hypothesized that insecticidal dsRNAs targeting at the western corn rootworm, Diabrotica virgifera virgifera, a billion-dollar insect pest, has no adverse impacts on S. curviseta, a soil decomposer. Following a tiered approach, we tested this risk hypothesis using a well-designed dietary RNAi toxicity assay. To create the worst-case scenario, the full-length cDNA of v-ATPase subunit A from S. curviseta were cloned and a 400 bp fragment representing the highest sequence similarity between target pest and non-target arthropods was selected as the template to synthesize insecticidal dsRNAs. Specifically, 10-days-old S. curviseta larvae were subjected to artificial diets containing v-ATPase A dsRNAs from both D. v. virgifera (dsDVV) and S. curviseta (dsSC), respectively, a dsRNA control, β-glucuronidase, from plant (dsGUS), and a vehicle control, H2O. The endpoint measurements included gene expression profiles, survival, and life history traits, such as developmental time, fecundity, hatching rate, and body length. Although, S. curviseta larvae developed significantly faster under the treatments of dsDVV and dsSC than the vehicle control, the combined results from both temporal RNAi effect study and dietary RNAi toxicity assay support the risk hypothesis, suggesting that the impacts of ingested arthropod-active dsRNAs on this representative soil decomposer are negligible

Harvesting Ambient Environmental Energy for Wireless Sensor Networks: A Survey

In recent years, wireless sensor networks (WSNs) have grown dramatically and made a great progress in many applications. But having limited life, batteries, as the power sources of wireless sensor nodes, have restricted the development and application of WSNs which often requires a very long lifespan for better performance. In order to make the WSNs prevalent in our lives, an alternative energy source is required. Environmental energy is an attractive power source, and it provides an approach to make the sensor nodes self-powered with the possibility of an almost infinite lifetime. The goal of this survey is to present a comprehensive review of the recent literature on the various possible energy harvesting technologies from ambient environment for WSNs

Genetic architecture behind developmental and seasonal control of tree growth and wood properties in Norway spruce

Genetic control of tree growth and wood formation varies depending on the age of the tree and the time of the year. Single-locus, multi-locus, and multi-trait genome-wide association studies (GWAS) were conducted on 34 growth and wood property traits in 1,303 Norway spruce individuals using exome capture to cover similar to 130K single-nucleotide polymorphisms (SNPs). GWAS identified associations to the different wood traits in a total of 85 gene models, and several of these were validated in a progenitor population. A multilocus GWAS model identified more SNPs associated with the studied traits than single-locus or multivariate models. Changes in tree age and annual season influenced the genetic architecture of growth and wood properties in unique ways, manifested by non-overlapping SNP loci. In addition to completely novel candidate genes, SNPs were located in genes previously associated with wood formation, such as cellulose synthases and a NAC transcription factor, but that have not been earlier linked to seasonal or age-dependent regulation of wood properties. Interestingly, SNPs associated with the width of the year rings were identified in homologs of Arabidopsis thaliana BARELY ANY MERISTEM 1 and rice BIG GRAIN 1, which have been previously shown to control cell division and biomass production. The results provide toots for future Norway spruce breeding and functional studies

Association genetics identifies a specifically regulated Norway spruce laccase gene, PaLAC5, linked to Heterobasidion parviporum resistance

It is important to improve the understanding of the interactions between the trees and pathogens and integrate this knowledge about disease resistance into tree breeding programs. The conifer Norway spruce (Picea abies) is an important species for the forest industry in Europe. Its major pathogen is Heterobasidion parviporum, causing stem and root rot.In this study, we identified 11 Norway spruce QTLs (Quantitative trait loci) that correlate with variation in resistance to H. parviporum in a population of 466 trees by association genetics. Individual QTLs explained between 2.1 and 5.2% of the phenotypic variance. The expression of candidate genes associated with the QTLs was analysed in silico and in response to H. parviporum hypothesizing that (a) candidate genes linked to control of fungal sapwood growth are more commonly expressed in sapwood, and; (b) candidate genes associated with induced defences are respond to H. parviporum inoculation. The Norway spruce laccase PaLAC5 associated with control of lesion length development is likely to be involved in the induced defences. Expression analyses showed that PaLAC5 responds specifically and strongly in close proximity to the H. parviporum inoculation. Thus, PaLAC5 may be associated with the lignosuberized boundary zone formation in bark adjacent to the inoculation site

Genetic control of tracheid properties in Norway spruce wood

Through the use of genome-wide association studies (GWAS) mapping it is possible to establish the genetic basis of phenotypic trait variation. Our GWAS study presents the first such effort in Norway spruce (Picea abies (L). Karst.) for the traits related to wood tracheid characteristics. The study employed an exome capture genotyping approach that generated 178 101 Single Nucleotide Polymorphisms (SNPs) from 40 018 probes within a population of 517 Norway spruce mother trees. We applied a least absolute shrinkage and selection operator (LASSO) based association mapping method using a functional multi-locus mapping approach, with a stability selection probability method as the hypothesis testing approach to determine significant Quantitative Trait Loci (QTLs). The analysis has provided 30 significant associations, the majority of which show specific expression in wood-forming tissues or high ubiquitous expression, potentially controlling tracheids dimensions, their cell wall thickness and microfibril angle. Among the most promising candidates based on our results and prior information for other species are: Picea abies BIG GRAIN 2 (PabBG2) with a predicted function in auxin transport and sensitivity, and MA_373300g0010 encoding a protein similar to wall-associated receptor kinases, which were both associated with cell wall thickness. The results demonstrate feasibility of GWAS to identify novel candidate genes controlling industrially-relevant tracheid traits in Norway spruce

Teasing apart the joint effect of demography and natural selection in the birth of a contact zone

Vast population movements induced by recurrent climatic cycles have shaped the genetic structure of plant species. During glacial periods species were confined to low-latitude refugia from which they recolonized higher latitudes as the climate improved. This multipronged recolonization led to many lineages that later met and formed large contact zones. We utilize genomic data from 5000 Picea abies trees to test for the presence of natural selection during recolonization and establishment of a contact zone in Scandinavia. Scandinavian P. abies is today made up of a southern genetic cluster originating from the Baltics, and a northern one originating from Northern Russia. The contact zone delineating them closely matches the limit between two major climatic regions. We show that natural selection contributed to its establishment and maintenance. First, an isolation-with-migration model with genome-wide linked selection fits the data better than a purely neutral one. Second, many loci show signatures of selection or are associated with environmental variables. These loci, regrouped in clusters on chromosomes, are often related to phenology. Altogether, our results illustrate how climatic cycles, recolonization and selection can establish strong local adaptation along contact zones and affect the genetic architecture of adaptive traits

A crowdsourced intervention to promote hepatitis B and C testing among men who have sex with men in China: A nationwide online randomized controlled trial

Background: Crowdsourcing may be an effective strategy to develop test promotion materials. We conducted an online randomized controlled trial (RCT) to evaluate a crowdsourced intervention to promote hepatitis B virus (HBV) and hepatitis C virus (HCV) testing among men who have sex with men (MSM) in China. Methods: MSM never previously tested for hepatitis were recruited through social media. Eligible men were randomized to receive an online crowdsourced intervention or no testing promotion materials. Outcomes including self-reported and confirmed HBV and HCV test uptake were assessed after four weeks. Odds ratios (OR) with 95% confidence intervals (95% CI) of men achieving primary and secondary outcomes between the intervention and control arms were calculated. Findings: 556 eligible men were enrolled. Overall, 17•4% (97/556) of men self-reported HBV and HCV testing and 7•9% (44/556) confirmed HBV and HCV test uptake. The intervention was seen by 72•1% and 29•0% of men in the intervention and control arms, respectively. In intention-to-treat analysis, confirmed HBV and HCV test uptake was similar between the two arms, both when using a missing=failure approach (OR 0•98, 95% CI 0•53–1•82) or multiple imputation (OR 1•46, 95% CI 0•72–2•95). Interpretation: This RCT extends the literature by developing and evaluating an intervention to spur hepatitis testing in a middle-income country with a high burden of hepatitis. Overall test uptake among MSM in China was similar to previous interventions promoting hepatitis testing in high-income countries. We found frequent intervention sharing, complicating interpretation of the results, and the role of crowdsourcing to promote hepatitis testing remains unclear

Study on the influence of scaffold morphology and structure on osteogenic performance

The number of patients with bone defects caused by various bone diseases is increasing yearly in the aging population, and people are paying increasing attention to bone tissue engineering research. Currently, the application of bone tissue engineering mainly focuses on promoting fracture healing by carrying cytokines. However, cytokines implanted into the body easily cause an immune response, and the cost is high; therefore, the clinical treatment effect is not outstanding. In recent years, some scholars have proposed the concept of tissue-induced biomaterials that can induce bone regeneration through a scaffold structure without adding cytokines. By optimizing the scaffold structure, the performance of tissue-engineered bone scaffolds is improved and the osteogenesis effect is promoted, which provides ideas for the design and improvement of tissue-engineered bones in the future. In this study, the current understanding of the bone tissue structure is summarized through the discussion of current bone tissue engineering, and the current research on micro-nano bionic structure scaffolds and their osteogenesis mechanism is analyzed and discussed

The Chinese pine genome and methylome unveil key features of conifer evolution

Conifers dominate the world's forest ecosystems and are the most widely planted tree species. Their giant and complex genomes present great challenges for assembling a complete reference genome for evolutionary and genomic studies. We present a 25.4-Gb chromosome-level assembly of Chinese pine (Pinus tabuliformis) and revealed that its genome size is mostly attributable to huge intergenic regions and long introns with high transposable element (TE) content. Large genes with long introns exhibited higher expressions levels. Despite a lack of recent whole-genome duplication, 91.2% of genes were duplicated through dispersed duplication, and expanded gene families are mainly related to stress responses, which may underpin conifers' adaptation, particularly in cold and/or arid conditions. The reproductive regulation network is distinct compared with angiosperms. Slow removal of TEs with high-level methylation may have contributed to genomic expansion. This study provides insights into conifer evolution and resources for advancing research on conifer adaptation and development