Advanced development of Pb-salt semiconductor lasers for the 8.0 to 15.0 micrometer spectral region

The technology was studied for producing Pb-salt diode lasers for the 8-51 micron spectral region suitable for use as local oscillators in a passive Laser Heterodyne Spectrometer (LHS). Consideration was given to long range NASA plans for the utilization of the passive LHS in a space shuttle environment. The general approach was to further develop the method of compositional interdiffusion (CID) recently reported, and used successfully at shorter wavelength. This technology was shown to provide an effective and reproducible method of producing a single-heterostructure (SH) diode of either the heterojunction or single-sided configuration. Performance specifications were exceeded in several devices, with single-ended CW power outputs as high as 0.88 milliwatts in a mode being achieved. The majority of the CID lasers fabricated had CW operating temperatures of over 60K; 30% of them operated CW above the boiling temperature of liquid nitrogen. CW operation above liquid nitrogen temperature was possible for wavelengths as long as 10.3 microns. Operation at 77K is significant with respect to space shuttle operations since its allows considerable simplification of cooling method

Determination of buffer capacity by means of an ISFET-based coulometric sensor-actuator system with a gate-covering porous actuator

In this paper we propose a dynamic way to measure the buffer capacity of an electrolyte by means of an ISFET-based coulometric sensor-actuator system whose gate is covered with a porous actuator. A theoterical model for this measurement is presented. Experiments are carried out in nitric and acetic acid as well as in phosphoric acid solutions. A fairly good agreement has been found between the theoretical calculations and the experimental results

Reliability improvements in tunable Pb1-xSnxSe diode lasers

Recent developments in the technology of Pb-salt diode lasers which have led to significant improvements in reliability and lifetime, and to improved operation at very long wavelengths are described. A combination of packaging and contacting-metallurgy improvements has led to diode lasers that are stable both in terms of temperature cycling and shelf-storage time. Lasers cycled over 500 times between 77 K and 300 K have exhibited no measurable changes in either electrical contact resistance or threshold current. Utilizing metallurgical contacting process, both lasers and experimental n-type and p-type bulk materials are shown to have electrical contact resistance values that are stable for shelf storage periods well in excess of one year. Problems and experiments which have led to devices with improved performance stability are discussed. Stable device configurations achieved for material compositions yielding lasers which operate continuously at wavelengths as long as 30.3 micrometers are described

Development of lead salt semiconductor lasers for the 9-17 micron spectral region

Improved diode lasers of Pb sub 1-x Sn sub x Se operating in the 9-17 micrometers spectral region were developed. The performance characteristics of the best lasers exceeded the contract goals of 500 microW/mode at T 30K in the 9-12 micrometers region and 200 microW/mode at T 18K in the 16-17 micrometers region. Increased reliability and device yields resulted from processing improvements which evolved from a series of diagnostic studies. By means of Auger electron spectroscopy, laser shelf storage degradation was shown to be characterized by the presence of In metal on the semiconductor crystal surfaces. Studies of various metal barrier layers between the crystals and the In metal led to the development of an improved metallurgical contacting technology which has resulted in devices with performance stability values exceeding the contract goal of a one year shelf life. Lasers cycled over 500 times between 300K and 77K were also shown to be stable. Studies on improved methods of fabricating striped geometry lasers indicated that good spectral mode characteristics resulted from lasers which stripe widths of 12 and 25 micrometers

Reconstruction of the phase of matter-wave fields using a momentum resolved cross-correlation technique

We investigate the potential of the so-called XFROG cross-correlation technique originally developed for ultrashort laser pulses for the recovery of the amplitude and phase of the condensate wave function of a Bose-Einstein condensate. Key features of the XFROG method are its high resolution, versatility and stability against noise and some sources of systematic errors. After showing how an analogue of XFROG can be realized for Bose-Einstein condensates, we illustrate its effectiveness in determining the amplitude and phase of the wave function of a vortex state. The impact of a reduction of the number of measurements and of typical sources of noise on the field reconstruction are also analyzed.Comment: 7 pages; 9 figures; article with higher resolution figures available from author

Consistent Application of Maximum Entropy to Quantum-Monte-Carlo Data

Bayesian statistics in the frame of the maximum entropy concept has widely been used for inferential problems, particularly, to infer dynamic properties of strongly correlated fermion systems from Quantum-Monte-Carlo (QMC) imaginary time data. In current applications, however, a consistent treatment of the error-covariance of the QMC data is missing. Here we present a closed Bayesian approach to account consistently for the QMC-data.Comment: 13 pages, RevTeX, 2 uuencoded PostScript figure

Modelling of non-steady-state concentration profiles at ISFET-based coulometric sensor—actuator systems

Acid or base concentrations can be determined very rapidly by performing an acid—base titration with coulometrically generated OH− or H+ ions at a noble metal actuator electrode in close proximity to the pH-sensitive gate of an ion-sensitive field effect transistor (ISFET). The ISFET is used as the indicator electrode to detect the equivalence point in the titration curve. Typical values for the time needed to reach the equivalence point are 0.5–10 s for acid or base concentrations ranging from 0.5 × 10−3 to 20 × 10−3 mol l−1.\ud \ud A model is presented, giving an analytical description of the diffusion phenomena that occur with the sensor—actuator system. The results of this analytical model description, using linearized concentration gradients, are presented together with the results of numerical simulations. Both results are in good agreement with measurements

Modelling of the migration effect occurring at an ISFET-based coulometric sensor-actuator system

The migration effect, in addition to diffusion, occurring at an ion-selective field-effect transistor (ISFET)-based coulometric sensor-actuator system has been studied. A diffusion-migration model is presented, based on the numerical solution of the Nernst-Planck equations of which a digital simulation is realized. Corresponding experiments were carried out and compared with the simulation. The results are in good agreement with the simulation.\ud Typical titration times of this system were found to be 0.5–10 s, corresponding to fully dissociated acid concentrations of 0.5×10−3−6.5×10−3 mol 1−1 with excess of supporting electrolyte. Both the simulation and experimental results show that if the concentration of the supporting electrolyte is 20 times higher than that of the species to be titrated, the deviation caused by migration is less than 5% and within the experimental error when pure diffusion is considered. At relatively low concentrations of supporting electrolyte, the migration effect should be taken into account to determine the concentrations of titrated species

Optimal Entanglement Generation from Quantum Operations

We consider how much entanglement can be produced by a non-local two-qubit unitary operation, $U_{AB}$ - the entangling capacity of $U_{AB}$. For a single application of $U_{AB}$, with no ancillas, we find the entangling capacity and show that it generally helps to act with $U_{AB}$ on an entangled state. Allowing ancillas, we present numerical results from which we can conclude, quite generally, that allowing initial entanglement typically increases the optimal capacity in this case as well. Next, we show that allowing collective processing does not increase the entangling capacity if initial entanglement is allowed.Comment: v1.0 15 pages, 3 figures, written in revtex4. v2.0 References updated. Submitted to Phys. Rev. A v3.0 16 pages, 4 figures. Expanded explanation in section 3A, figures corrected and made clearer. Definition of entangling capacity in section 4 made explicit. Other minor typos correcte