High temperature ceramic interface study

Monolithic SiC and Si3N4 are susceptible to contact stress damage at static and sliding interfaces. Transformation-toughened zirconia (TTZ) was evaluated under sliding contact conditions to determine if the higher material fracture toughness would reduce the susceptibility to contact stress damage. Contact stress tests were conducted on four commercially available TTZ materials at normal loads ranging from 0.455 to 22.7 kg (1 to 50 pounds) at temperatures ranging from room temperature to 1204C (2200 F). Static and dynamic friction were measured as a function of temperature. Flexural strength measurements after these tests determined that the contact stress exposure did not reduce the strength of TTZ at contact loads of 0.455, 4.55, and 11.3 kg (1, 10, and 25 pounds). Prior testing with the lower toughness SiC and Si3N4 materials resulted in a substantial strength reduction at loads of only 4.55 and 11.3 kg (10 and 25 pounds). An increase in material toughness appears to improve ceramic material resistance to contact stress damage. Baseline material flexure strength was established and the stress rupture capability of TTZ was evaluated. Stress rupture tests determined that TTZ materials are susceptible to deformation due to creep and that aging of TTZ materials at elevated temperatures results in a reduction of material strength

Robust autoresonant excitation in the plasma beat-wave accelerator: a theoretical study

A modified version of the Plasma Beat-Wave Accelerator scheme is introduced and analyzed, which is based on autoresonant phase-locking of the nonlinear Langmuir wave to the slowly chirped beat frequency of the driving lasers via adiabatic passage through resonance. This new scheme is designed to overcome some of the well-known limitations of previous approaches, namely relativistic detuning and nonlinear modulation or other non-uniformity or non-stationarity in the driven Langmuir wave amplitude, and sensitivity to frequency mismatch due to measurement uncertainties and density fluctuations and inhomogeneities

The uniting of Europe and the foundation of EU studies: revisiting the neofunctionalism of Ernst B. Haas

This article suggests that the neofunctionalist theoretical legacy left by Ernst B. Haas is somewhat richer and more prescient than many contemporary discussants allow. The article develops an argument for routine and detailed re-reading of the corpus of neofunctionalist work (and that of Haas in particular), not only to disabuse contemporary students and scholars of the normally static and stylized reading that discussion of the theory provokes, but also to suggest that the conceptual repertoire of neofunctionalism is able to speak directly to current EU studies and comparative regionalism. Neofunctionalism is situated in its social scientific context before the theory's supposed erroneous reliance on the concept of 'spillover' is discussed critically. A case is then made for viewing Haas's neofunctionalism as a dynamic theory that not only corresponded to established social scientific norms, but did so in ways that were consistent with disciplinary openness and pluralism

Peripheral volume measurements as indices of peripheral circulatory factors in the cardiovascular orthostatic response

Peripheral volume measurements as indices of circulatory factors in cardiovascular orthostatic respons

Water-ice driven activity on Main-Belt Comet P/2010 A2 (LINEAR) ?

The dust ejecta of Main-Belt Comet P/2010 A2 (LINEAR) have been observed with several telescopes at the at the Observatorio del Roque de los Muchachos on La Palma, Spain. Application of an inverse dust tail Monte Carlo method to the images of the dust ejecta from the object indicates that a sustained, likely water-ice driven, activity over some eight months is the mechanism responsible for the formation of the observed tail. The total amount of dust released is estimated to be 5E7 kg, which represents about 0.3% of the nucleus mass. While the event could have been triggered by a collision, this cannot be decided from the currently available data.Comment: Accepted for ApJ Letter

Experimental Identification of the Kink Instability as a Poloidal Flux Amplification Mechanism for Coaxial Gun Spheromak Formation

The magnetohydrodynamic kink instability is observed and identified experimentally as a poloidal flux amplification mechanism for coaxial gun spheromak formation. Plasmas in this experiment fall into three distinct regimes which depend on the peak gun current to magnetic flux ratio, with (I) low values resulting in a straight plasma column with helical magnetic field, (II) intermediate values leading to kinking of the column axis, and (III) high values leading immediately to a detached plasma. Onset of column kinking agrees quantitatively with the Kruskal-Shafranov limit, and the kink acts as a dynamo which converts toroidal to poloidal flux. Regime II clearly leads to both poloidal flux amplification and the development of a spheromak configuration.Comment: accepted for publication in Physical Review Letter

Acoustic Emission Multi-Parameter Analyzer—AEMPA

A multi-parameter measurement system was designed and built to process signals from acoustic emission (AE) transducers in real time. The system makes selected measurements of each detected AE event as it occurs and stores 23 measured parameters which describe that event in digital form on a standard diskette with IBM format. Measurements recorded on the diskette include information on the shape, magnitude, and frequency content of each AE burst, its timing with respect to location on the specimen under test and its timing with respect to load conditions, pressure, test time, and event count. Over 8000 AE events can be stored on a single diskette at a maximum instantaneous rate of 6000 events/sec and a maximum average rate of 1000 events/sec. Two floppy disk units are included in the system so one can be operational while the diskette is being changed in the other. After a specimen test, the data are transmitted to a remote minicomputer with a standard RS232 interface. Rapid analysis and display of the data by the computer has been demonstrated using up to 8 of the AE parameters at one time in a pattern recognition routine

One step multiderivative methods for first order ordinary differential equations

A family of one-step multiderivative methods based on Padé approximants to the exponential function is developed. The methods are extrapolated and analysed for use in PECE mode. Error constants and stability intervals are calculated and the combinations compared with well known linear multi-step combinations and combinations using high accuracy Newton-Cotes quadrature formulas as correctors. w926020