Two-stage Turing model for generating pigment patterns on the leopard and the jaguar

Based on the results of phylogenetic analysis, which showed that flecks are the primitive pattern of the felid family and all other patterns including rosettes and blotches develop from it, we construct a Turing reaction-diffusion model which generates spot patterns initially. Starting from this spotted pattern, we successfully generate patterns of adult leopards and jaguars by tuning parameters of the model in the subsequent phase of patterning

Oscillatory Turing Patterns in a Simple Reaction-Diffusion System

Turing suggested that, under certain conditions, chemicals can react and diffuse in such a way as to produce steady-state inhomogeneous spatial patterns of chemical concentrations. We consider a simple two-variable reaction-diffusion system and find there is a spatio-temporally oscillating solution (STOS) in parameter regions where linear analysis predicts a pure Turing instability and no Hopf instability. We compute the boundary of the STOS and spatially non-uniform solution (SSNS) regions and investigate what features control its behavior

UK National Data Guardian for Health and Care’s Review of Data Security: Trust, better security and opt-outs

Sharing health and social care data is essential to the delivery of high quality health care as well as disease surveillance, public health, and for conducting research. However, these societal benefits may be constrained by privacy and data protection principles. Hence, societies are striving to find a balance between the two competing public interests. Whilst the spread of IT advancements in recent decades has increased the demand for an increased privacy and data protection in many ways health is a special case. UK are adopting guidelines, codes of conduct and regulatory instruments aimed to implement privacy principles into practical settings and enhance public trust. Accordingly, in 2015, the UK National Data Guardian (NDG) requested to conduct a further review of data protection, referred to as Caldicott 3.  The scope of this review is to strengthen data security standards and confidentiality. It also proposes a consent system based on an "opt-out" model rather than on "opt-in.Across Europe as well as internationally the privacy-health data sharing balance is not fixed.  In Europe enactment of the new EU Data Protection Regulation in 2016 constitute a major breakthrough, which is likely to have a profound effect on European countries and beyond.  In Australia and across North America different ways are being sought to balance out these twin requirements of a modern society - to preserve privacy alongside affording high quality health care for an ageing population.  Whilst in the UK privacy legal framework remains complex and fragmented into different layers of legislation, which may negatively impact on both the rights to privacy and health the UK is at the forefront in the uptake of international and EU privacy and data protection principles. And, if the privacy regime were reorganised in a more comprehensive manner, it could be used as a sound implementation model for other countries

A tensile deformation model for in-situ dendrite/metallic glass matrix composites

In-situ dendrite/metallic glass matrix composites (MGMCs) with a composition of Ti46Zr20V12Cu5Be17 exhibit ultimate tensile strength of 1510 MPa and fracture strain of about 7.6%. A tensile deformation model is established, based on the five-stage classification: (1) elastic-elastic, (2) elastic-plastic, (3) plastic-plastic (yield platform), (4) plastic-plastic (work hardening), and (5) plastic-plastic (softening) stages, analogous to the tensile behavior of common carbon steels. The constitutive relations strongly elucidate the tensile deformation mechanism. In parallel, the simulation results by a finite-element method (FEM) are in good agreement with the experimental findings and theoretical calculations. The present study gives a mathematical model to clarify the work-hardening behavior of dendrites and softening of the amorphous matrix. Furthermore, the model can be employed to simulate the tensile behavior of in-situ dendrite/MGMCs

Does Informatics enable or inhibit the delivery of patient-centred, coordinated, and quality-assured care: a Delphi study. A contribution of the Imia Primary Health Care Informatics Working Group

Background: Primary care delivers patient-centred and coordinated care, which should be quality-assured. Much of family practice now routinely uses computerised medical record (CMR) systems, these systems being linked at varying levels to laboratories and other care providers. CMR systems have the potential to support care. Objective: To achieve a consensus among an international panel of health care professionals and informatics experts about the role of informatics in the delivery of patient-centred, coordinated, and quality-assured care. Method: The consensus building exercise involved 20 individuals, five general practitioners and 15 informatics academics, members of the International Medical Informatics Association Primary Care Informatics Working Group. A thematic analysis of the literature was carried out according to the defined themes. Results:The first round of the analysis developed 27 statements on how the CMR, or any other information system, including paper-based medical records, supports care delivery. Round 2 aimed at achieving a consensus about the statements of round one. Round 3 stated that there was an agreement on informatics principles and structures that should be put in place. However, there was a disagreement about the processes involved in the implementation, and about the clinical interaction with the systems after the implementation. Conclusions: The panel had a strong agreement about the core concepts and structures that should be put in place to support high quality care. However, this agreement evaporated over statements related to implementation. These findings reflect literature and personal experiences: whilst there is consensus about how informatics structures and processes support good quality care, implementation is difficult

A Tensile Deformation Model for In-situ Dendrite/Metallic Glass Matrix Composites

In-situ dendrite/metallic glass matrix composites (MGMCs) with a composition of Ti₄₆Zr₂₀V₁₂Cu₅Be₁₇ exhibit ultimate tensile strength of 1510 MPa and fracture strain of about 7.6%. A tensile deformation model is established, based on the five-stage classification: (1) elastic-elastic, (2) elastic-plastic, (3) plastic-plastic (yield platform), (4) plastic-plastic (work hardening), and (5) plastic-plastic (softening) stages, analogous to the tensile behavior of common carbon steels. The constitutive relations strongly elucidate the tensile deformation mechanism. In parallel, the simulation results by a finite-element method (FEM) are in good agreement with the experimental findings and theoretical calculations. The present study gives a mathematical model to clarify the work-hardening behavior of dendrites and softening of the amorphous matrix. Furthermore, the model can be employed to simulate the tensile behavior of in-situ dendrite/MGMCs

Room-Temperature Power-Stabilized Narrow-Linewidth Tunable Erbium-Doped Fiber Ring Laser Based on Cascaded Mach-Zehnder Interferometers with Different Free Spectral Range for Strain Sensing

An automatically power-stabilized (with power fluctuation <0.155 dB), narrow-linewidth (0.0171 nm), wavelength-tunable (10.69 nm) erbium-doped fiber laser has been proposed by cascading two fiber Mach-Zehnder interferometers (MZI) without using any temperature controlling device. One of the MZIs (here called the 1st MZI) is composed of two 3 dB couplers to form interference patterns while the other MZI (here termed the 2nd MZI) is constructed with a tapered seven-core fiber (SCF) and based on the principle of supermode interference. For the two MZIs, the free spectral range (FSR), the passband bandwidth and the extinction ratio (ER) at 1560 nm are 0.37 nm, 0.19 nm, 16.6 dB and 13.93 nm, 7.93 nm, 10.1 dB, respectively. Due to the major difference between the two FSR values, the 1st MZI and the 2nd MZI respectively play a role in controlling the laser linewidth and suppressing the homogeneous broadening effect to reach to a satisfactory level of power stability. The 2nd MZI is also used to fine tune the laser wavelength by applying strain to the tapered SCF (TSCF) over the spectral range of 1570.22-1559.33 nm, with an incremental step of 0.37 nm being used. The side-mode suppression ratio (SMSR) of the tunable fiber laser can be up to 45 dB. By appropriately adjusting the polarization controller, dual wavelength lasing can also be achieved. For single wavelength lasing, the 3 dB laser linewidth is 0.0171 nm. The power fluctuation, without a temperature controlling device being used and operating at room temperature, is found to be less than 0.155 dB over 1 hour while the central wavelength drift is less than 0.19 nm

Numerical Modeling of Spray Combustion with an Unstructured-Grid Method

The present unstructured-grid method follows strictly the basic finite volume forms of the conservation laws of the governing equations for the entire flow domain. High-order spatially accurate formulation has been employed for the numerical solutions of the Navier-Stokes equations. A two-equation k-epsilon turbulence model is also incorporated in the unstructured-grid solver. The convergence of the resulted linear algebraic equation is accelerated with preconditioned Conjugate Gradient method. A statistical spray combustion model has been incorporated into the present unstructured-grid solver. In this model, spray is represented by discrete particles, rather than by continuous distributions. A finite number of computational particles are used to predict a sample of total population of particles. Particle trajectories are integrated using their momentum and motion equations and particles exchange mass, momentum and energy with the gas within the computational cell in which they are located. The interaction calculations are performed simultaneously and eliminate global iteration for the two-phase momentum exchange. A transient spray flame in a high pressure combustion chamber is predicted and then the solution of liquid-fuel combusting flow with a rotating cup atomizer is presented and compared with the experimental data. The major conclusion of this investigation is that the unstructured-grid method can be employed to study very complicated flow fields of turbulent spray combustion. Grid adaptation can be easily achieved in any flow domain such as droplet evaporation and combustion zone. Future applications of the present model can be found in the full three-dimensional study of flow fields of gas turbine and liquid propulsion engine combustion chambers with multi-injectors