92 research outputs found

    Characterization of dentine to assess bond strength of dental composites

    Get PDF
    This study was performed to develop alternating dentine adhesion models that could help in the evaluation of a self-bonding dental composite. For this purpose dentine from human and ivory was characterized chemically and microscopically before and after acid etching using Raman and SEM. Mechanical properties of dentine were determined using 3 point bend test. Composite bonding to dentine, with and without use of acid pre-treatment and/or the adhesive, were assessed using a shear bond test. Furthermore, micro gap formation after restoration of 3 mm diameter cavities in dentine was assessed by SEM. Initial hydroxyapatite level in ivory was half that in human dentine. Surface hydroxyapatites decreased by approximately half with every 23 s of acid etch. The human dentine strength (56 MPa) was approximately double that of ivory, while the modulus was almost comparable to that of ivory. With adhesive use, average shear bond strengths were 30 and 26 MPa with and without acid etching. With no adhesive, average bond strength was 6 MPa for conventional composites. This, however, increased to 14 MPa with a commercial flowable "self-bonding" composite or upon addition of low levels of an acidic monomer to the experimental composite. The acidic monomer additionally reduced micro-gap formation with the experimental composite. Improved bonding and mechanical properties should reduce composite failures due to recurrent caries or fracture respectively

    Management and Complications of Arnold Chiari Hydrocephalus at Tertiary Health Care Center

    Full text link
    Objective: to investigate the role of CT and MRI in diagnosis of Arnold chiari malformation of hydrocephalus and its treatment with VP shunt along with complications. Study Design: Prospective study Place and duration: Department of Neurosurgery, DG Khan Medical College from May 4, 2018 to May 4, 2019. Methodology: Fifty patients of congenital hydrocephalus who were not treated previously were selected. Detailed history about disease and clinical examination of patients was performed. Follow ups were done at neurosurgery OPD. SPSS software for data analysis was used and mean ± SD, frequency and percentages were calculated for variables. P value ≤0.05 was considered as significant. Results: Treatment in case of congenital hydrocephalus as VP shunt, intra-aneurysmal coiling, excision of meningomyelocele with VP shunt and suboccipital craniectomy + upper cervical laminectomy (scucl) were observed as 10%, 6%, 8% and 8% respectively.  Twelve percent of patients were not treated. Conclusion: CT and MRI are the main diagnostic tools for diagnosis of Arnold chiari malformation and VP shunt is the treatment of choice. Among complications of VP shunt infection of shunt and shunt block are the main complications

    Improvement in the Mechanical Properties of High Temperature Shape Memory Alloy (Ti 50

    Get PDF
    High temperature shape memory alloys Ti50Ni25Pd25 and Ti50Ni20Pd25Cu5 were developed, characterized, and tensile tested in both martensite ( Mf − 50°C) and austenite ( Af + 50°C) phases. The transformation temperatures of ternary Ti50Ni25Pd25 alloy were increased by 11 to 12.5°C by substitution of Ni with 5 at% Cu. At the same time, transformation heat absorbed and released during forward and reverse martensitic transformation was also increased. In the martensite phase, the mechanical properties, that is, the stress for reorientation of martensite variants and fracture stress, were increased by 33 and 60 MPa, respectively, whereas the fracture strain was decreased by 1.5%. In the austenite phase, the critical stress for slip and fracture stress were increased by 62 and 40.9 MPa, respectively, whereas the fracture strain was decreased by 1.2%. The increase in both stresses was attributed to the solid solution strengthening by substitution of Ni atoms with relatively greater atomic radius of copper (Cu) atoms. The overall results suggest that the addition of 5 at% Cu in place of Ni in Ti50Ni25Pd25 alloy is very beneficial to improving the mechanical and shape memory properties and increasing the transformation temperatures

    Conversion, shrinkage, water sorption, flexural strength and modulus of re-mineralizing dental composites

    Get PDF
    Cure, volumetric changes and mechanical properties were assessed for new dental composites containing chlorhexidine (CHX) and reactive calcium phosphate-containing (CaP) to reduce recurrent caries

    Assessment of essential minerals and physico-chemical analysis of floral origins fresh honey produced by Apis mellifera

    Get PDF
    Abstract Honey is one of the best nutritious substances in the world, having different services in the body functions regulation. Ten elements (K, Na, Ca, Co, Cr, Mn, Mo, Ni, Pb, Se) from honey samples were analyzed from 80 different locations of Punjab and ten floras. The aim of the present study was to determine the quality and quantity of minerals and Physico-chemical analysis in honey. A flame photometer was used to measure the concentration of major minerals (K, Ca and Na). The concentration of micro minerals (Co, Cr, Mn, Mo, Ni, Pb and Se) was analyzed using Atomic Absorption Spectrometer. The concentration of macro-elements obtained was as follow (in ppm): K (166-1732), Na (107-418) and Ca (07-99), while the concentration of microelements (in ppm) Co (1-2), Cr (>1), Mn ( Co > Ni > Pb > Cr > Mo > Mn. The findings showed that all the heavy metals like Co, Cr, Ni and Pb were present in trace amounts and close to International Honey Quality Standard. The result of given honey samples represented highest value of moisture (31.23%), color (80 mm pfund), pH (8.23), acidity (72.02 meq/kg), electrical conductivity (0.85 ms/cm) and ash contents (0.83%)

    Dysregulation in multiple transcriptomic endometrial pathways is associated with recurrent implantation failure and recurrent early pregnancy loss

    Get PDF
    Overlapping disease aetiologies associated with multiple altered biological processes have been identified that change the endometrial function leading to recurrent implantation failure (RIF) and recurrent early pregnancy loss (REPL). We aimed to provide a detailed insight into the nature of the biological malfunction and related pathways of differentially expressed genes in RIF and REPL. Endometrial biopsies were obtained from 9 women experiencing RIF, REPL and control groups. Affymetrix microarray analysis was performed to measure the gene expression level of the endometrial biopsies. Unsupervised clustering of endometrial samples shows scattered distribution of gene expression between the RIF, REPL and control groups. 2556 and 1174 genes (p value 1.2) were significantly altered in the endometria of RIF and REPL patients’ group, respectively compared to the control group. Downregulation in Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways of the differentially expressed genes (DEGs) in RIF and REPL including ribosome and oxidative phosphorylation pathways. Gene Ontology (GO) analysis revealed ribosomes and mitochondria inner membrane as the most significantly downregulated cellular component (CC) affected in RIF and REPL. Determination of the dysregulated genes and related biological pathways in RIF and REPL will be key in understanding their molecular pathology and of major importance in addressing diagnosis, prognosis, and treatment issue

    Distance-Based and Low Energy Adaptive Clustering Protocol for Wireless Sensor Networks

    Get PDF
    A wireless sensor network (WSN) comprises small sensor nodes with limited energy capabilities. The power constraints of WSNs necessitate efficient energy utilization to extend the overall network lifetime of these networks. We propose a distance-based and low-energy adaptive clustering (DISCPLN) protocol to streamline the green issue of efficient energy utilization in WSNs. We also enhance our proposed protocol into the multi-hop-DISCPLN protocol to increase the lifetime of the network in terms of high throughput with minimum delay time and packet loss. We also propose the mobile-DISCPLN protocol to maintain the stability of the network. The modelling and comparison of these protocols with their corresponding benchmarks exhibit promising results

    Exploring stevioside binding affinity with various proteins and receptors actively involved in the signaling pathway and a future candidate for diabetic patients

    Get PDF
    Introduction and Background: Diabetes is a chronic metabolic disease characterized by elevated blood glucose levels and is one of the main global health concerns. Synthetic sugar substrate has many side effects such as leukemia, bladder cancer, hepatotoxicity, breast cancer, headache, and brain toxicity. The WHO and FDA has recently banned some of the synthetic sugar alternatives due to their carcinogenic effects.Objective and Methodology: Therefore, the main objective of the current study was to investigate the safety and binding affinity of Stevioside with Glucose Transpoter-4 (GLUT-4), Akt, Insulin Receptor (IR) and Insulin Receptor Substrate-1 (IRS-1) to confirmed that Stevioside is one the potent natural sweetener/drug for diabetes. This study delves into the molecular interaction between Stevioside and key diabetic proteins: GLUT-4, Akt, IR and IRS-1. A precise molecular docking approach was used to simulate the binding affinity of Stevioside to these proteins. The pharmacokinetic properties of the molecule should be taken into consideration as important variables throughout the virtual screening process.Results: The result of active site analysis of GLUT-4, Akt, IR and IRS-1 showed a zone of 2158.359 Ǻ2, 579.259 Ǻ2, 762.651 Ǻ2, and 152.167 Ǻ2 and a volume of 2765.094 Ǻ³, 355.567 Ǻ³, 686.806 Ǻ³, and 116.874 Ǻ³, respectively. Docking analysis of the Stevioside compound showed the highest docking energy with scores of −9.9 with GLUT-4, −6.7 with Akt, −8.0 with IR and −8.8 with IRS-1. Studies indicated that it remains undigested by stomach acids and enzymes and is not absorbed in the upper small intestine. Further, tests revealed no hepatotoxicity, AMES toxicity, or skin sensitivity, making it a promising candidate for safe consumption as drug metabolism.Conclusion and Recommendations: Instead of other sugar alternatives, Stevioside will help diabetic patients with a lower chance of infections, lowered blood pressure/blood sugar, and increased glucose uptake in diabetic muscles. Stevioside is a natural sweetener, and the current study recommends its usage in various dietary products for diabetic patients
    corecore