794 research outputs found
Nanoparticle-Induced Unusual Melting and Solidification Behaviours of Metals
Effective control of melting and solidification behaviours of materials is significant for numerous applications. It has been a long-standing challenge to increase the melted zone (MZ) depth while shrinking the heat-affected zone (HAZ) size during local melting and solidification of materials. In this paper, nanoparticle-induced unusual melting and solidification behaviours of metals are reported that effectively solve this long-time dilemma. By introduction of Al(2)O(3) nanoparticles, the MZ depth of Ni is increased by 68%, while the corresponding HAZ size is decreased by 67% in laser melting at a pulse energy of 0.18 mJ. The addition of SiC nanoparticles shows similar results. The discovery of the unusual melting and solidification of materials that contain nanoparticles will not only have impacts on existing melting and solidification manufacturing processes, such as laser welding and additive manufacturing, but also on other applications such as pharmaceutical processing and energy storage
The simulation of magnetorheological elastomers adaptive tuned dynamic vibration absorber for automobile engine vibration control
The aim of this article is to investigate the use of a Dynamic Vibration Absorber to control vibration of engine by using simulation. Traditional means of vibration control have involved the use of passive and more recently, active methods. This study is different in that it involves an adaptive component in the design of vibration absorber using magnetorheological elastomers (MREs) as the adaptive spring.
MREs are kind of novel smart material whose shear modulus can be controlled by applied magnetic field. In this paper, the vibration mode of a simple model of automobile engine is simulated by Finite Element Method (FEM) analysis. Based on the analysis, the MREs Adaptive Tuned Dynamic Vibration Absorber (ATDVA) is presented to reduce the vibration of the engine. Simulation result indicate that the control frequency of ATDVA can be changed by modifing the shear modulus of MREs and the vibraion reduction efficiency of ATDVA are also evaluated by FEM analysis
Ginkgo biloba extract for essential hypertension: A systemic review
AbstractBackgroundGinkgo biloba extract (GBE), a traditional natural herbal product, is often used in the treatment of essential hypertension (EH) as complementary therapy in China and European countries.AimTo critically assess the current clinical evidence of efficacy and safety of GBE for EH.Methods7 electronic databases (Cochrane Library, PubMed, EMBASE, VIP, CBM, Wanfang data, and CNKI) were searched to identify randomized controlled trials (RCTs) of GBE for EH. Methodological quality was assessed independently using the Cochrane Handbook for Systematic Reviews of Interventions.ResultsA total of 9 RCTs with 1012 hypertensive patients were identified and reviewed. Most RCTs were of high risk of bias with flawed study design and poor methodological quality. 6 trials demonstrated potential positive effect of GBE as complementary therapy on BP reduction when compared with antihypertensive drug therapy; however, it was not associated with a statistically significant effect on both SBP and DBP reduction in 3 other trials. Despite the positive findings, there were so many methodological limitations and significant clinical heterogeneity. Most of the trials did not report adverse effects, and the safety of GBE is still uncertain.ConclusionNo confirmative conclusions on the efficacy and safety of GBE for EH could be drawn. More rigorous trials are warranted to support their clinical use
Dimensional Crossover in the Effective Second Harmonic Generation of Films of Random Dielectrics
The effective nonlinear response of films of random composites consisting of
a binary composite with nonlinear particles randomly embedded in a linear host
is theoretically and numerically studied. A theoretical expression for the
effective second harmonic generation susceptibility, incorporating the
thickness of the film, is obtained by combining a modified effective-medium
approximation with the general expression for the effective second harmonic
generation susceptibility in a composite. The validity of the thoretical
results is tested against results obtained by numerical simulations on random
resistor networks. Numerical results are found to be well described by our
theory. The result implies that the effective-medium approximation provides a
convenient way for the estimation of the nonlinear response in films of random
dielectrics.Comment: 9 pages, 2 figures; accepted for publication in Phys. Rev.
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
In this paper, reinforced thermoplastic pipes (RTP) were studied under various loads. A total of five groups of specimens were designed to study the mechanical properties of RTPs under internal pressure, bending, a combination of internal pressure and bending moment, external pressure, and tension. This study obtained the bursting pressure of RTPs under internal pressure, the minimum bending radius under the bending moment, and the failure pressure under external pressure. At the same time, the mechanical properties of RTPs under various loads were analyzed using the finite element analysis. Analytical results agree well with the experimental ones. The finite element model established in this paper can be used for further research on the mechanical properties of RTPs
Multiple superconducting gap and anisotropic spin fluctuations in iron arsenides: Comparison with nickel analog
We present extensive 75As NMR and NQR data on the superconducting arsenides
PrFeAs0.89F0.11 (Tc=45 K), LaFeAsO0.92F0.08 (Tc=27 K), LiFeAs (Tc = 17 K) and
Ba0.72K0.28Fe2As2 (Tc = 31.5 K) single crystal, and compare with the nickel
analog LaNiAsO0.9F0.1 (Tc=4.0 K) . In contrast to LaNiAsO0.9F0.1 where the
superconducting gap is shown to be isotropic, the spin lattice relaxation rate
1/T1 in the Fe-arsenides decreases below Tc with no coherence peak and shows a
step-wise variation at low temperatures. The Knight shift decreases below Tc
and shows a step-wise T variation as well. These results indicate spinsinglet
superconductivity with multiple gaps in the Fe-arsenides. The Fe
antiferromagnetic spin fluctuations are anisotropic and weaker compared to
underdoped copper-oxides or cobalt-oxide superconductors, while there is no
significant electron correlations in LaNiAsO0.9F0.1. We will discuss the
implications of these results and highlight the importance of the Fermi surface
topology.Comment: 6 pages, 11 figure
Second Harmonic Generation for a Dilute Suspension of Coated Particles
We derive an expression for the effective second-harmonic coefficient of a
dilute suspension of coated spherical particles. It is assumed that the coating
material, but not the core or the host, has a nonlinear susceptibility for
second-harmonic generation (SHG). The resulting compact expression shows the
various factors affecting the effective SHG coefficient. The effective SHG per
unit volume of nonlinear coating material is found to be greatly enhanced at
certain frequencies, corresponding to the surface plasmon resonance of the
coated particles. Similar expression is also derived for a dilute suspension of
coated discs. For coating materials with third-harmonic (THG) coefficient,
results for the effective THG coefficients are given for the cases of coated
particles and coated discs.Comment: 11 pages, 3 figures; accepted for publication in Phys. Rev.
Striped antiferromagnetic order and electronic properties of stoichiometric LiFeAs from first-principles calculations
We investigate the structural, electronic, and magnetic properties of
stoichiometric LiFeAs by using state-of-the-arts first-principles method. We
find the magnetic ground-state by comparing the total energies among all the
possible magnetic orders. Our calculated internal positions of Li and As are in
good agreement with experiment. Our results show that stoichiometric LiFeAs has
almost the same striped antiferromagnetic spin order as other FeAs-based parent
compounds and tetragonal FeSe do, and the experimental fact that no magnetic
phase transition has been observed at finite temperature is attributed to the
tiny inter-layer spin coupling
Ferrocenyl-triazolyl-tetrathiafulvalene assemblies: synthesis and electrochemical recognition properties
Cu(I)-catalyzed Huisgen–Meldal–Sharpless type dipolar ‘click’ reactions between azido-tetrathiafulvalene derivatives and ethynylferrocene yield the first examples of ferrocenyl-1,2,3-triazolyl-tetrathiafulvalene assemblies (4a, 4b). The electrochemical behavior of 4a and 4b, which integrate two distinctive redox probes, has been investigated, and their binding ability for various transition-metal cations has been studied by cyclic voltammetry. The contribution of the triazolyl ring in the guest binding process is illustrated by the specific electrochemical recognition of Zn2+ by receptor 4b
- …