Nonlinear hydrodynamic and thermoacoustic oscillations of a bluff-body stabilised turbulent premixed flame

Turbulent premixed flames often experience thermoacoustic instabilities when the combustion heat release rate is in phase with acoustic pressure fluctuations. Linear methods often assume a priori that oscillations are periodic and occur at a dominant frequency with a fixed amplitude. Such assumptions are not made when using nonlinear analysis. When an oscillation is fully saturated, nonlinear analysis can serve as a useful avenue to reveal flame behaviour far more elaborate than period-one limit cycles, including quasi-periodicity and chaos in hydrodynamically or thermoacoustically self-excited system. In this paper, the behaviour of a bluff-body stabilised turbulent premixed propane/air flame in a model jet-engine afterburner configuration is investigated using computational fluid dynamics. For the frequencies of interest in this investigation, an unsteady Reynolds-averaged Navier–Stokes approach is found to be appropriate. Combustion is represented using a modified laminar flamelet approach with an algebraic closure for the flame surface density. The results are validated by comparison with existing experimental data and with large eddy simulation, and the observed self-excited oscillations in pressure and heat release are studied using methods derived from dynamical systems theory. A systematic analysis is carried out by increasing the equivalence ratio of the reactant stream supplied to the premixed flame. A strong variation in the global flame structure is observed. The flame exhibits a self-excited hydrodynamic oscillation at low equivalence ratios, becomes steady as the equivalence ratio is increased to intermediate values, and again exhibits a self-excited thermoacoustic oscillation at higher equivalence ratios. Rich nonlinear behaviour is observed and the investigation demonstrates that turbulent premixed flames can exhibit complex dynamical behaviour including quasiperiodicity, limit cycles and period-two limit cycles due to the interactions of various physical mechanisms. This has implications in selecting the operating conditions for such flames and for devising proper control strategies for the avoidance of thermoacoustic instability.The authors would like to acknowledge financial support from the Dorothy Hodgkin Postgraduate Award and Rolls-Royce Plc.This is the author accepted manuscript. The final version is available from Taylor & Francis via http://dx.doi.org/10.1080/13647830.2015.111855

Experimental sensitivity analysis and control of thermoacoustic systems

In this paper, we report the results of an experimental sensitivity analysis on a thermoacoustic system – an electrically heated Rijke tube. We measure the change of the linear stability characteristics of the system, quantified as shifts in the growth rate and oscillation frequency, that is caused by the introduction of a passive control device. The control device is a mesh, which causes drag in the system. The rate of growth is slow, so the growth rate and frequency can be measured very accurately over many hundreds of cycles in the linear regime with and without control. These measurements agree qualitatively well with the theoretical predictions from adjoint-based methods of Magri & Juniper (J. Fluid Mech., vol. 719, 2013, pp. 183–202). This agreement supports the use of adjoint methods for the development and implementation of control strategies for more complex thermoacoustic systems.This is the author accepted manuscript. The final version is available from Cambridge University Press via http://dx.doi.org/10.1017/jfm.2015.71

Non-modal stability analysis of low-Re separated flow around a NACA 4415 airfoil in ground effect

© 2019 Elsevier Masson SAS In this numerical–theoretical study, we perform a linear non-modal stability analysis of the separated flow around a NACA 4415 airfoil over a no-slip ground at low Reynolds numbers (300⩽Re⩽500) and high angles of attack (12∘⩽α⩽20∘). We find that: (i) the strength of the recirculation zone behind the airfoil is a key parameter controlling the absolute/convective nature of the instability in the boundary layer downstream; (ii) when Re, α or the ground clearance increases, the energy gain also increases, with the optimal perturbations switching from being three dimensional to two dimensional; and (iii) classical hairpin vortices, or Klebanoff modes, can be produced by three-dimensional optimal perturbations on a two-dimensional steady base flow containing a laminar separation bubble. Knowledge of the spatiotemporal features of the optimal mode could aid the design of advanced strategies for flow control. This study offers new insight into the transient growth behavior of airfoil–ground flow systems at low Re and high α, contributing to a better understanding of the ground-effect aerodynamics of small insects and micro aerial vehicles

Recurrence analysis of forced synchronization in a self-excited thermoacoustic system

We use recurrence analysis to investigate the forced synchronization of a self-excited thermoacoustic system. The system consists of a swirl-stabilized turbulent premixed flame in an open-ended duct. We apply periodic acoustic forcing to this system at different amplitudes and frequencies around its natural self-excited frequency, and examine its response via unsteady pressure measurements. On increasing the forcing amplitude, we observe two bifurcations: from a periodic limit cycle (unforced) to quasiperiodicity (weak forcing) and then to lock-in (strong forcing). To analyse these bifurcations, we use cross-recurrence plots (CRPs) of the unsteady pressure and acoustic forcing. We find that the different time scales characterizing the quasiperiodicity and the transition to lock-in appear as distinct structures in the CRPs. We then examine those structures using cross recurrence quantification analysis (CRQA) and find that their recurrence quantities change even before the system transitions to lock-in. This shows that CRPs and CRQA can be used as alternative nonlinear tools to study forced synchronization in thermoacoustic systems, complementing classical linear tools such as spectral analysis.EPSR

Extracting flame describing functions in the presence of self-excited thermoacoustic oscillations

One of the key elements in the prediction of thermoacoustic oscillations is the determination of the acoustic response of flames as an element in an acoustic network, in the form of a flame describing function (FDF). In order to obtain a response, flames often have to be confined into a system with its own acoustic response. Separating the pure flame response and that of the system can be complicated by the non-linear effects that the flame can have on the overall system response. In this paper, we investigate whether it is possible to obtain a flame response via the usual methods of dynamic chemiluminescence and pressure measurements, starting from an unforced system with incipient self-excitations at a given frequency fs, in the form of a stabilized flame at atmospheric pressure with a 700 mm tube as a combustor. The flame is forced at discrete frequencies from 20 to 400 Hz, away from the self-excitation, and the response of the flame is measured using OH* chemiluminescence. This response was compared to a flame response measured in a short tube with no other excitations. The results show that both the gain and phase can be entirely dominated by the behavior of the self-excitation, so that in general it is not possible to extract reliable gain and phase information as if the forced and self-excited modes acted independently and linearly. Although the gain in this particular case was not significantly affected, the phase information of the original flame became dominated by the triggered self-excitation. Boundary conditions and systems used for flame acoustic forcing therefore need to be carefully controlled whenever there is a possibility of self-excitation.This work was funded by EPSRC-UK under the SAMULET project (EP/G035784/1). H. Han was supported through a CSC fellowship

Nonlinear dynamics of a self-excited thermoacoustic system subjected to acoustic forcing

This is the proof version. It is also available from Elsevier at http://www.sciencedirect.com/science/article/pii/S1540748914000327#.We experimentally study the nonlinear dynamics of a self-excited thermoacoustic system subjected to acoustic forcing. Our aim is to relate these dynamics to the behavior of universal model oscillators subjected to external forcing. The self-excited system under study consists of a swirl-stabilized turbulent premixed flame (equivalence ratio of 0.8 and thermal power of 13.6 kW) enclosed in a quartz tube with an open-ended exit. We coustically force this system at different amplitudes and frequencies, and measure its response with pressure transducers and OH* chemiluminescence from the flame. By analyzing the data with the power spectral density and the Poincare´ map, we find a range of nonlinear dynamics, including (i) a shifting of the self-excited frequency towards or away from the forcing frequency as the forcing amplitude increases; (ii) an accompanying transition from periodicity to two-frequency quasiperiodicity; and (iii) an eventual suppression of the self-excited amplitude, indicating synchronization of the self-excited mode with the forced mode. By further analyzing the data with the Hilbert transform, we find evidence of phase trapping, a partially synchronous state characterized by frequency locking without phase locking. All of these dynamics can be found in universal model oscillators subjected to external forcing. This suggests that such oscillators can be used to accurately represent thermoacoustically self-excited combusting systems subjected to similar forcing. It also suggests that the analytical solutions to such oscillators can be used to guide the reduction and analysis of experimental or numerical data obtained from real thermoacoustic systems, and to identify effective methods for open-loop control of their dynamics.This work was funded by EPSRC-UK under the SAMULET Project (EP/G035784/1)

Control of self-excited thermoacoustic oscillations using transient forcing, hysteresis and mode switching

© 2019 The Combustion Institute In many combustion devices, strong self-excited flow oscillations can arise from feedback between unsteady heat release and acoustics, resulting in increased vibration and pollutant emissions. Open-loop acoustic forcing has been shown to be effective in weakening such thermoacoustic oscillations, but current implementations of this control strategy require the forcing to be continuously applied. In this proof-of-concept study, we experimentally demonstrate an alternative method of weakening thermoacoustic oscillations in a self-excited combustion system – a laminar premixed flame in a double open-ended tube. Unlike existing methods, the proposed method combines the use of transient forcing with hysteresis and mode switching, thus avoiding the need to continuously supply energy to the control system. Control is achieved by exploiting the fact that most combustors have a multitude of natural thermoacoustic modes, some of which are linearly unstable but some are nonlinearly unstable. By applying open-loop acoustic forcing at an off-resonance frequency and at an amplitude higher than that required for synchronization, we find that the combustor can switch to one of the nonlinearly unstable natural modes (f2) and remain there, even after the forcing is removed. Dynamic mode decomposition of high-speed chemiluminescence videos shows that this mode switching occurs because the flame structure at f2 is more robust than that at the original linearly unstable natural mode. The final unforced state has a thermoacoustic amplitude of just half that of the initial unforced state, even though the Rayleigh index of the former is higher than that of the latter. Although this 50% reduction in thermoacoustic amplitude is not as large as the 95% reduction achieved with asynchronous quenching, it is achieved without the use of continuous forcing. This is a distinct advantage over existing control strategies as it allows the complexity and power requirements of the control system to be reduced. With further development and testing, particularly on turbulent swirling combustors, the proposed control strategy could pave the way for a new class of open-loop control techniques based on transient forcing rather than continuous forcing

Research protocol: general practice organ donation intervention-a feasibility study (GPOD)

BACKGROUND: New interventions are required to increase the number of people donating their organs after death. In the United States of America (USA), general practice has proved to be a successful location to increase organ donor registration. However, a dearth of research exists examining this in the United Kingdom (UK). due to the unique challenges presented by the National Health Service (NHS). This protocol outlines a feasibility study to assess whether UK general practice is a feasible and acceptable location for organ donation intervention targeting NHS Organ Donor Register (NHS ODR) membership. METHODS: The primary intervention element, prompted choice, requires general practice to ask patients in consultations if they wish to join the NHS ODR. Two additional intervention techniques will be used to support prompted choice: staff training and leaflets and posters. The intervention will run for 3 months (April-July 2018) followed by a period of data collection. The following methods will be used to assess feasibility, acceptability and fidelity: registration data, a training evaluation survey, focus groups with staff and online surveys for staff and patients. DISCUSSION: By examining the feasibility, acceptability and fidelity of a prompted choice intervention in UK general practice, important knowledge can be gathered on whether it is a suitable location to conduct this. Additional learning can also be gained generally for implementing interventions in general practice. This could contribute to the knowledge base concerning the feasibility of NHS general practice to host interventions

Wild-Type Phosphoribosylpyrophosphate Synthase (PRS) from Mycobacterium tuberculosis: A Bacterial Class II PRS?

The 5-phospho-α-D-ribose 1-diphosphate (PRPP) metabolite plays essential roles in several biosynthetic pathways, including histidine, tryptophan, nucleotides, and, in mycobacteria, cell wall precursors. PRPP is synthesized from α-D-ribose 5-phosphate (R5P) and ATP by the Mycobacterium tuberculosis prsA gene product, phosphoribosylpyrophosphate synthase (MtPRS). Here, we report amplification, cloning, expression and purification of wild-type MtPRS. Glutaraldehyde cross-linking results suggest that MtPRS predominates as a hexamer, presenting varied oligomeric states due to distinct ligand binding. MtPRS activity measurements were carried out by a novel coupled continuous spectrophotometric assay. MtPRS enzyme activity could be detected in the absence of Pi. ADP, GDP and UMP inhibit MtPRS activity. Steady-state kinetics results indicate that MtPRS has broad substrate specificity, being able to accept ATP, GTP, CTP, and UTP as diphosphoryl group donors. Fluorescence spectroscopy data suggest that the enzyme mechanism for purine diphosphoryl donors follows a random order of substrate addition, and for pyrimidine diphosphoryl donors follows an ordered mechanism of substrate addition in which R5P binds first to free enzyme. An ordered mechanism for product dissociation is followed by MtPRS, in which PRPP is the first product to be released followed by the nucleoside monophosphate products to yield free enzyme for the next round of catalysis. The broad specificity for diphosphoryl group donors and detection of enzyme activity in the absence of Pi would suggest that MtPRS belongs to Class II PRS proteins. On the other hand, the hexameric quaternary structure and allosteric ADP inhibition would place MtPRS in Class I PRSs. Further data are needed to classify MtPRS as belonging to a particular family of PRS proteins. The data here presented should help augment our understanding of MtPRS mode of action. Current efforts are toward experimental structure determination of MtPRS to provide a solid foundation for the rational design of specific inhibitors of this enzyme