8,161 research outputs found

    Progressive Failure Simulation of Security Cable Barriers

    Get PDF
    Perimeter security cable barriers are widely used by various agencies all over the world to defeat threat vehicle penetration. New barrier designs require crash test validation prior to implementation. Full-scale vehicular crash tests are costly, whereas designs via finite element simulations are time consuming and require specialized skills. Based on full-scale crash tests, an innovative and simple algorithm has been developed to model the progressive failure of security cable barriers. A multi-body approach based on the first principles of physics was developed to substantially reduce computer runtime. The solution algorithm uses a large number of small time steps. Nonlinear vehicle and cable forces and deformations are calculated based on compatibility conditions. This methodology has been validated against three full-scale crash tests. This cable barrier model, displaying simulation results graphically in a time series, provides realistic response parameters of a security cable barrier design in less than 10 minutes of runtime with reasonable accuracy

    Coherent manipulation of charge qubits in double quantum dots

    Full text link
    The coherent time evolution of electrons in double quantum dots induced by fast bias-voltage switches is studied theoretically. As it was shown experimentally, such driven double quantum dots are potential devices for controlled manipulation of charge qubits. By numerically solving a quantum master equation we obtain the energy- and time-resolved electron transfer through the device which resembles the measured data. The observed oscillations are found to depend on the level offset of the two dots during the manipulation and, most surprisingly, also the on initialization stage. By means of an analytical expression, obtained from a large-bias model, we can understand the prominent features of these oscillations seen in both the experimental data and the numerical results. These findings strengthen the common interpretation in terms of a coherent transfer of electrons between the dots.Comment: 18 pages, 4 figure

    A microchip optomechanical accelerometer

    Get PDF
    The monitoring of accelerations is essential for a variety of applications ranging from inertial navigation to consumer electronics. The basic operation principle of an accelerometer is to measure the displacement of a flexibly mounted test mass; sensitive displacement measurement can be realized using capacitive, piezo-electric, tunnel-current, or optical methods. While optical readout provides superior displacement resolution and resilience to electromagnetic interference, current optical accelerometers either do not allow for chip-scale integration or require bulky test masses. Here we demonstrate an optomechanical accelerometer that employs ultra-sensitive all-optical displacement read-out using a planar photonic crystal cavity monolithically integrated with a nano-tethered test mass of high mechanical Q-factor. This device architecture allows for full on-chip integration and achieves a broadband acceleration resolution of 10 \mu g/rt-Hz, a bandwidth greater than 20 kHz, and a dynamic range of 50 dB with sub-milliwatt optical power requirements. Moreover, the nano-gram test masses used here allow for optomechanical back-action in the form of cooling or the optical spring effect, setting the stage for a new class of motional sensors.Comment: 16 pages, 9 figure

    Measurement of the Inclusive Charm Cross Section at 4.03 GeV and 4.14 GeV

    Full text link
    The cross section for charmed meson production at s=4.03\sqrt{s} = 4.03 and 4.14 GeV has been measured with the Beijing Spectrometer. The measurement was made using 22.3 pb1pb^{-1} of e+ee^+e^- data collected at 4.03 GeV and 1.5 pb1pb^{-1} of e+ee^+e^- data collected at 4.14 GeV. Inclusive observed cross sections for the production of charged and neutral D mesons and momentum spectra are presented. Observed cross sections were radiatively corrected to obtain tree level cross sections. Measurements of the total hadronic cross section are obtained from the charmed meson cross section and an extrapolation of results from below the charm threshold.Comment: 11 pages, 13 figures. The top level tex file is paper.tex. It builds the paper from other tex files in this .tar and the .eps file

    Study of J/ψppˉJ/\psi\to p\bar{p} and J/ψnnˉJ/\psi\to n\bar{n}

    Get PDF
    The decays J/ψppˉJ/\psi\to p\bar{p} and J/ψnnˉJ/\psi\to n\bar{n} have been investigated with a sample of 225.2 million J/ψJ/\psi events collected with the BESIII detector at the BEPCII e+ee^+e^- collider. The branching fractions are determined to be B(J/ψppˉ)=(2.112±0.004±0.031)×103\mathcal{B}(J/\psi\to p\bar{p})=(2.112\pm0.004\pm0.031)\times10^{-3} and B(J/ψnnˉ)=(2.07±0.01±0.17)×103\mathcal{B}(J/\psi\to n\bar{n})=(2.07\pm0.01\pm0.17)\times10^{-3}. Distributions of the angle θ\theta between the proton or anti-neutron and the beam direction are well described by the form 1+αcos2θ1+\alpha\cos^2\theta, and we find α=0.595±0.012±0.015\alpha=0.595\pm0.012\pm0.015 for J/ψppˉJ/\psi\to p\bar{p} and α=0.50±0.04±0.21\alpha=0.50\pm0.04\pm0.21 for J/ψnnˉJ/\psi\to n\bar{n}. Our branching-fraction results suggest a large phase angle between the strong and electromagnetic amplitudes describing the J/ψNNˉJ/\psi\to N\bar{N} decay.Comment: 16 pages, 13 figures, the 2nd version, submitted to PR

    First Measurement of the Branching Fraction of the Decay psi(2S) --> tau tau

    Full text link
    The branching fraction of the psi(2S) decay into tau pair has been measured for the first time using the BES detector at the Beijing Electron-Positron Collider. The result is Bττ=(2.71±0.43±0.55)×103B_{\tau\tau}=(2.71\pm 0.43 \pm 0.55) \times 10^{-3}, where the first error is statistical and the second is systematic. This value, along with those for the branching fractions into e+e- and mu+mu of this resonance, satisfy well the relation predicted by the sequential lepton hypothesis. Combining all these values with the leptonic width of the resonance the total width of the psi(2S) is determined to be (252±37)(252 \pm 37) keV.Comment: 9 pages, 2 figure

    Hole Doping Evolution of the Quasiparticle Band in Models of Strongly Correlated Electrons for the High-T_c Cuprates

    Full text link
    Quantum Monte Carlo (QMC) and Maximum Entropy (ME) techniques are used to study the spectral function A(p,ω)A({\bf p},\omega) of the one band Hubbard model in strong coupling including a next-nearest-neighbor electronic hopping with amplitude t/t=0.35t'/t= -0.35. These values of parameters are chosen to improve the comparison of the Hubbard model with angle-resolved photoemission (ARPES) data for Sr2CuO2Cl2Sr_2 Cu O_2 Cl_2. A narrow quasiparticle (q.p.) band is observed in the QMC analysis at the temperature of the simulation T=t/3T=t/3, both at and away from half-filling. Such a narrow band produces a large accumulation of weight in the density of states at the top of the valence band. As the electronic density decreases further away from half-filling, the chemical potential travels through this energy window with a large number of states, and by 0.70 \sim 0.70 it has crossed it entirely. The region near momentum (0,π)(0,\pi) and (π,0)(\pi,0) in the spectral function is more sensitive to doping than momenta along the diagonal from (0,0)(0,0) to (π,π)(\pi,\pi). The evolution with hole density of the quasiparticle dispersion contains some of the features observed in recent ARPES data in the underdoped regime. For sufficiently large hole densities the ``flat'' bands at (π,0)(\pi,0) cross the Fermi energy, a prediction that could be tested with ARPES techniques applied to overdoped cuprates. The population of the q.p. band introduces a {\it hidden} density in the system which produces interesting consequences when the quasiparticles are assumed to interact through antiferromagnetic fluctuations and studied with the BCS gap equation formalism. In particular, a region of extended s-wave is found to compete with d-wave in the overdoped regime, i.e. when the chemical potential has almost entirely crossed the q.p.Comment: 14 pages, Revtex, with 13 embedded ps figures, submitted to Phys. Rev. B., minor modifications in the text and in figures 1b, 2b, 3b, 4b, and 6

    Dilepton production in proton-proton collisions at BEVALAC energies

    Full text link
    The dilepton production in elementary ppe+eX{pp\to e^{+}e^{-}X} reactions at BEVALAC energies Tlab=1÷5T_{lab}=1\div 5 GeV is investigated. The calculations include direct e+e{e^{+}e^{-}} decays of the vector mesons ρ0\rho ^{0}, ω\omega , and ϕ\phi , Dalitz decays of the π0\pi ^{0}-, η\eta -, % \rho -, ω\omega -, and ϕ\phi -mesons, and of the baryon resonances % \Delta (1232),N(1520), ...... . The subthreshold vector meson production cross sections in pppp collisions are treated in a way sufficient to avoid double counting with the inclusive vector meson production. The vector meson dominance model for the transition form factors of the resonance Dalitz decays Re+eNR\to e^{+}e^{-}N is used in an extended form to ensure correct asymptotics which are in agreement with the quark counting rules. Such a modification gives an unified and consistent description of both RNγR\to N\gamma radiative decays and RNρ(ω)R\to N\rho (\omega) meson decays. The effect of multiple pion production on the experimental efficiency for the detection of the dilepton pairs is studied. We find the dilepton yield in reasonable agreement with the experimental data for the set of intermediate energies whereas at the highest energy Tlab=4.88T_{lab}=4.88 GeV the number of dilepton pairs is likely to be overestimated experimentally in the mass range M=300÷700M=300\div 700 MeV.Comment: 25 pages (IOP style), 5 figures, revised manuscript accepted for publication in JP

    Massive migration from the steppe is a source for Indo-European languages in Europe

    Full text link
    We generated genome-wide data from 69 Europeans who lived between 8,000-3,000 years ago by enriching ancient DNA libraries for a target set of almost four hundred thousand polymorphisms. Enrichment of these positions decreases the sequencing required for genome-wide ancient DNA analysis by a median of around 250-fold, allowing us to study an order of magnitude more individuals than previous studies and to obtain new insights about the past. We show that the populations of western and far eastern Europe followed opposite trajectories between 8,000-5,000 years ago. At the beginning of the Neolithic period in Europe, ~8,000-7,000 years ago, closely related groups of early farmers appeared in Germany, Hungary, and Spain, different from indigenous hunter-gatherers, whereas Russia was inhabited by a distinctive population of hunter-gatherers with high affinity to a ~24,000 year old Siberian6 . By ~6,000-5,000 years ago, a resurgence of hunter-gatherer ancestry had occurred throughout much of Europe, but in Russia, the Yamnaya steppe herders of this time were descended not only from the preceding eastern European hunter-gatherers, but from a population of Near Eastern ancestry. Western and Eastern Europe came into contact ~4,500 years ago, as the Late Neolithic Corded Ware people from Germany traced ~3/4 of their ancestry to the Yamnaya, documenting a massive migration into the heartland of Europe from its eastern periphery. This steppe ancestry persisted in all sampled central Europeans until at least ~3,000 years ago, and is ubiquitous in present-day Europeans. These results provide support for the theory of a steppe origin of at least some of the Indo-European languages of Europe
    corecore