12,788 research outputs found
Recommended from our members
Improved Bar Impact Tests Using A Photonic Doppler Velocimeter
Bar impact tests, using the techniques described elsewhere in this symposium, were used to measure compressive and tensile strengths of borosilicate glass, soda lime glass, and a glass ceramic. The glass ceramic was 25% crystalline spinel, furnished by Corning Inc. There are two measures of compressive strength: the peak stress that can be transmitted in unconfined compression, and the >steady state> strength. For borosilicate glass and soda lime glass, these values were similar, being about 1.8 and 1.5 GPa, respectively. The glass ceramic (25% spinel) was almost 50% stronger. Tensile failure in the glass and glass ceramic takes places via surface flaws, and thus tensile strength is an extrinsic, as opposed to intrinsic property.Mechanical Engineerin
Quantized adiabatic quantum pumping due to interference
Recent theoretical calculations, demonstrating that quantized charge transfer
due to adiabatically modulated potentials in mesoscopic devices can result
purely from the interference of the electron wave functions (without invoking
electron-electron interactions) are reviewed: (1) A new formula is derived for
the pumped charge Q (per period); It reproduces the Brouwer formula without a
bias, and also yields the effect of the modulating potential on the Landauer
formula in the presence of a bias. (2) For a turnstile geometry, with
time-dependent gate voltages V_L(t) and V_R(t), the magnitude and sign of Q are
determined by the relative position and orientation of the closed contour
traversed by the system in the {V_L-V_R} plane, relative to the transmission
resonances in that plane. Integer values of Q (in units of e) are achieved when
a transmission peak falls inside the contour, and are given by the winding
number of the contour. (3) When the modulating potential is due to surface
acoustic waves, Q exhibits a staircase structure, with integer values,
reminiscent of experimental observations.Comment: Invited talk, Localization, Tokyo, August 200
Recommended from our members
Comparison of software models for energy savings from cool roofs
A web-based Roof Savings Calculator (RSC) has been deployed for the United States Department of Energy as an industry-consensus tool to help building owners, manufacturers, distributors, contractors and researchers easily run complex roof and attic simulations. RSC simulates multiple roof and attic technologies for side-by-side comparison including reflective roofs, different roof slopes, above sheathing ventilation, radiant barriers, low-emittance roof surfaces, duct location, duct leakage rates, multiple substrate types, and insulation levels. Annual simulations of hour-by-hour, whole-building performance are used to provide estimated annual energy and cost savings from reduced HVAC use. While RSC reported similar cooling savings to other simulation engines, heating penalty varied significantly. RSC results show reduced cool roofing cost-effectiveness, thus mitigating expected economic incentives for this countermeasure to the urban heat island effect. This paper consolidates comparison of RSC's projected energy savings to other simulation engines including DOE-2.1E, AtticSim, Micropas, and EnergyPlus. Also included are comparisons to previous simulation-based studies, analysis of RSC cooling savings and heating penalties, the role of radiative heat exchange in an attic assembly, and changes made for increased accuracy of the duct model. Radiant heat transfer and duct interaction not previously modeled is considered a major contributor to heating penalties
Quantum dot dephasing by edge states
We calculate the dephasing rate of an electron state in a pinched quantum
dot, due to Coulomb interactions between the electron in the dot and electrons
in a nearby voltage biased ballistic nanostructure. The dephasing is caused by
nonequilibrium time fluctuations of the electron density in the nanostructure,
which create random electric fields in the dot. As a result, the electron level
in the dot fluctuates in time, and the coherent part of the resonant
transmission through the dot is suppressed
X-Ray Tomography To Measure Size Of Fragments From Penetration Of High-Velocity Tungsten Rods
Behind-armor debris that results from tungsten rods penetrating armor steel at 2 km/s was studied by analysis of recovered fragments. Fragment recovery was by means of particle board. Individual fragments were analyzed by x-ray tomography, which provides information for fragment identification, mass, shape, and penetration down to masses of a few milligrams. The experiments were complemented by AUTODYN and EPIC calculations. Fragments were steel or tungsten generated from the channel or from the breakout through the target rear surface. Channel fragment motions were well described by Tate theory. Breakout fragments had velocities from the projectile remnant to the channel velocity, apparently depending on where in the projectile a fragment originated. The fragment size distribution was extremely broad and did not correlate well with simple uniform-fragment-size models.Mechanical Engineerin
Giant isotope effect in the incoherent tunneling specific heat of the molecular nanomagnet Fe8
Time-dependent specific heat experiments on the molecular nanomagnet Fe8 and
the isotopic enriched analogue 57Fe8 are presented. The inclusion of the 57Fe
nuclear spins leads to a huge enhancement of the specific heat below 1 K,
ascribed to a strong increase in the spin-lattice relaxation rate Gamma arising
from incoherent, nuclear-spin-mediated magnetic quantum tunneling in the
ground-doublet. Since Gamma is found comparable to the expected tunneling rate,
the latter process has to be inelastic. A model for the coupling of the
tunneling levels to the lattice is presented. Under transverse field, a
crossover from nuclear-spin-mediated to phonon-induced tunneling is observed.Comment: Replaced with version accepted for publication in Physical Review
Letter
- …