Physically-Realizable Uniform Temperature Boundary Condition Specification on a Wall of an Enclosure: Part II – Problem Solution

Temperature measurements along one side of the rectangular plate showed severe temperature non-uniformity along one side of a wall of a cubical experimental apparatus where the uniform temperature was physically desired. Despite proper planning and analyses, this non-uniformity was high enough that a benchmark study could not be carried out to the desired accuracy of about one percent error. This paper presents and extends analyses made previously based on the modifications to the original design of the apparatus to reduce the temperature non-uniformity on the wall by adding an auxiliary heater around a wall where the uniform temperature was desired. A detailed mathematical analysis shows significant reduction in temperature non-uniformity from about four percent (based on the initial design) to less than one percent (for the modified design). By examining the temperature difference between two locations on the plate, the predicted temperature difference obtained through mathematical analyses show excellent agreement with the measured temperature difference. The temperature non-uniformity along the boundary of a wall was reduced to less than one percent of the overall temperature difference

Physically-Realizable Uniform Temperature Boundary Condition Specification on a Wall of an Enclosure: Part I – Problem Investigation

Designing an experimental apparatus requires considerable amount of planning. Despite proper planning, one can easily overlook a design such as the standard uniform temperature boundary condition applied to all or portion of a wall of an experimental apparatus. Although this boundary condition is mathematically simple and precise, achieving it physically may not be that simple. This paper addresses one such three-dimensional natural convection heat transfer apparatus that was designed to measure benchmark Nusselt numbers at various Rayleigh numbers with uniform temperatures specified at two walls of the enclosure. It was found that the effect of thermal spreading/constriction resistance on one wall where this uniform temperature condition was prescribed was significant, and as a result, the uniform temperature profile based on the initial design was not physically achieved. In support of this non-uniform temperature observation, this paper presents a thermal resistance model of a plate (which is a portion of this overall heat transfer apparatus) to explain the observed temperature non-uniformity. The results obtained from the current model are validated with measured data, and in terms of a temperature difference between two locations on the plate, the approximate analytical solution is well within the experimental error of 0.03K

A compact and reconfigurable silicon nitride time-bin entanglement circuit

Photonic chip based time-bin entanglement has attracted significant attention because of its potential for quantum communication and computation. Useful time-bin entanglement systems must be able to generate, manipulate and analyze entangled photons on a photonic chip for stable, scalable and reconfigurable operation. Here we report the first time-bin entanglement photonic chip that integrates time-bin generation, wavelength demultiplexing and entanglement analysis. A two-photon interference fringe with an 88.4% visibility is measured (without subtracting any noise), indicating the high performance of the chip. Our approach, based on a silicon nitride photonic circuit, which combines the low-loss characteristic of silica and tight integration features of silicon, paves the way for scalable real-world quantum information processors.Comment: 4 pages, 5 figure

Repeat-Until-Success quantum computing using stationary and flying qubits

We introduce an architecture for robust and scalable quantum computation using both stationary qubits (e.g. single photon sources made out of trapped atoms, molecules, ions, quantum dots, or defect centers in solids) and flying qubits (e.g. photons). Our scheme solves some of the most pressing problems in existing non-hybrid proposals, which include the difficulty of scaling conventional stationary qubit approaches, and the lack of practical means for storing single photons in linear optics setups. We combine elements of two previous proposals for distributed quantum computing, namely the efficient photon-loss tolerant build up of cluster states by Barrett and Kok [Phys. Rev. A 71, 060310(R) (2005)] with the idea of Repeat-Until-Success (RUS) quantum computing by Lim et al. [Phys. Rev. Lett. 95, 030505 (2005)]. This idea can be used to perform eventually deterministic two-qubit logic gates on spatially separated stationary qubits via photon pair measurements. Under non-ideal conditions, where photon loss is a possibility, the resulting gates can still be used to build graph states for one-way quantum computing. In this paper, we describe the RUS method, present possible experimental realizations, and analyse the generation of graph states.Comment: 14 pages, 7 figures, minor changes, references and a discussion on the effect of photon dark counts adde

ENGINEERING CONCEPTS IN ANALYSING LUMBOSACRAL LOAD IN POST-OPERATIVE SCOLIOTIC PATIENTS

Lumbosacral alignment plays a major role in the mechanical low back pain in normal population. Malalignment causes increased strain to the muscles and ligaments around it which eventually leads to mechanical low back pain and discomfort. The level of strain a ligament receives in the lumbosacral junction depends upon the lumbosacral angle and the load exerted on it. If there is an easy way to find the load exerted at the lumbosacral junction, then it would be trouble free for the physicians to examine. Hence, the treatment can be planned accordingly. This study analysis the angle, net force produced and stress faced by the ligaments around the lumbosacral joint in postoperative scoliosis patients using radiographic images. Study design was analytical, observational cross sectional study. Radiographs of 30 patients were collected and one sample ‘t ’test was used for data analysis with ‘p ’value set as 0.05 as level of significance .The mean lumbosacral angle of the postoperative scoliotic patients was found to be 45.56 degrees and the standard deviation was ± 8.7156. The results suggest that patients who underwent scoliosis correction surgery did not have an optimal lumbosacral angle of 30 degrees

Performance limits of the three MEMS inertial energy generator transduction types

Accepted versio

Graft-vs-tumor effect in patients with advanced nasopharyngeal cancer treated with nonmyeloablative allogeneic PBSC transplantation

While nonmyeloablative peripheral blood stem cell transplantation (NST) has shown efficacy against several solid tumors, it is untested in nasopharyngeal cancer (NPC). In a phase II clinical trial, 21 patients with pretreated metastatic NPC underwent NST with sibling PBSC allografts, using CY conditioning, thymic irradiation and in vivo T-cell depletion with thymoglobulin. Stable lymphohematopoietic chimerism was achieved in most patients and prophylactic CYA was tapered at a median of day +30. Seven patients (33%) showed partial response and three (14%) achieved stable disease. Four patients were alive at 2 years and three showed prolonged disease control of 344, 525 and 550 days. With a median follow-up of 209 (4–1147) days, the median PFS was 100 days (95% confidence interval (CI), 66–128 days), and median OS was 209 days (95% CI, 128–236 days). Patients with chronic GVHD had better survival—median OS 426 days (95% CI, 194–NE days) vs 143 days (95% CI, 114–226 days) (P=0.010). Thus, NST may induce meaningful clinical responses in patients with advanced NPC

Optical Propagation and Communication

Contains summary of research and reports on four research projects.National Science Foundation (Grant ECS81-20637)U.S. Navy - Office of Naval Research (Contract N00014-81-K-0662)Maryland Procurement Office (Contract MDA904-84-C-6037)U.S. Army Research Office - Durham (Contract DAAG29-80-K-0022)U.S. Army Research Office - Durham (Contract DAAG29-84-K-0095)U.S. Navy - Office of Naval Research (Contract N00014-80-C-0941

Indistinguishable heralded single photon generation via relative temporal multiplexing of two sources

Generating N single photons simultaneously is a formidable challenge due to the lack of deterministic single photon sources. Recent work [New J. Phys. 19, 063013 (2017)] has proposed a relative multiplexing scheme that can enhance the N single photons probability with a minimum of active switching resources. We experimentally demonstrate relative temporal multiplexing on two photon sources with a 90% additional enhancement over the standard temporal multiplexing scheme demonstrated previously. 88 ± 11% visibility of Hong-Ou-Mandel quantum interference verifies the indistinguishability of the heralded single photons after the synchronization. This proof-of-principle demonstration points out the potential significance of the relative multiplexing scheme for large-scale photonic quantum information processing