193 research outputs found
Transferrin receptor 2 controls bone mass and pathological bone formation via BMP and Wnt signalling
Transferrin receptor 2 (Tfr2) is mainly expressed in the liver and controls iron homeostasis. Here, we identify Tfr2 as a regulator of bone homeostasis that inhibits bone formation. Mice lacking Tfr2 display increased bone mass and mineralization independent of iron homeostasis and hepatic Tfr2. Bone marrow transplantation experiments and studies of cell-specific Tfr2 knockout mice demonstrate that Tfr2 impairs BMP-p38MAPK signaling and decreases expression of the Wnt inhibitor sclerostin specifically in osteoblasts. Reactivation of MAPK or overexpression of sclerostin rescues skeletal abnormalities in Tfr2 knockout mice. We further show that the extracellular domain of Tfr2 binds BMPs and inhibits BMP-2-induced heterotopic ossification by acting as a decoy receptor. These data indicate that Tfr2 limits bone formation by modulating BMP signaling, possibly through direct interaction with BMP either as a receptor or as a co-receptor in a complex with other BMP receptors. Finally, the Tfr2 extracellular domain may be effective in the treatment of conditions associated with pathological bone formation
Les droits disciplinaires des fonctions publiques : « unification », « harmonisation » ou « distanciation ». A propos de la loi du 26 avril 2016 relative à la déontologie et aux droits et obligations des fonctionnaires
The production of tt‾ , W+bb‾ and W+cc‾ is studied in the forward region of proton–proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98±0.02 fb−1 . The W bosons are reconstructed in the decays W→ℓν , where ℓ denotes muon or electron, while the b and c quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions.The production of , and is studied in the forward region of proton-proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98 0.02 \mbox{fb}^{-1}. The bosons are reconstructed in the decays , where denotes muon or electron, while the and quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions
Measurement of the J/ψ pair production cross-section in pp collisions at TeV
The production cross-section of J/ψ pairs is measured using a data sample of pp collisions collected by the LHCb experiment at a centre-of-mass energy of TeV, corresponding to an integrated luminosity of 279 ±11 pb. The measurement is performed for J/ψ mesons with a transverse momentum of less than 10 GeV/c in the rapidity range 2.0 < y < 4.5. The production cross-section is measured to be 15.2 ± 1.0 ± 0.9 nb. The first uncertainty is statistical, and the second is systematic. The differential cross-sections as functions of several kinematic variables of the J/ψ pair are measured and compared to theoretical predictions.The production cross-section of pairs is measured using a data sample of collisions collected by the LHCb experiment at a centre-of-mass energy of , corresponding to an integrated luminosity of . The measurement is performed for mesons with a transverse momentum of less than in the rapidity range . The production cross-section is measured to be . The first uncertainty is statistical, and the second is systematic. The differential cross-sections as functions of several kinematic variables of the pair are measured and compared to theoretical predictions
Measurement of forward production in collisions at TeV
A measurement of the cross-section for production in collisions is presented using data corresponding to an integrated luminosity of fb collected by the LHCb experiment at a centre-of-mass energy of TeV. The electrons are required to have more than GeV of transverse momentum and to lie between 2.00 and 4.25 in pseudorapidity. The inclusive production cross-sections, where the decays to , are measured to be \begin{align*} \begin{split} \sigma_{W^{+} \to e^{+}\nu_{e}}&=1124.4\pm 2.1\pm 21.5\pm 11.2\pm 13.0\,\mathrm{pb},\\ \sigma_{W^{-} \to e^{-}\bar{\nu}_{e}}&=\,\,\,809.0\pm 1.9\pm 18.1\pm\,\,\,7.0\pm \phantom{0}9.4\,\mathrm{pb}, \end{split} \end{align*} where the first uncertainties are statistical, the second are systematic, the third are due to the knowledge of the LHC beam energy and the fourth are due to the luminosity determination. Differential cross-sections as a function of the electron pseudorapidity are measured. The cross-section ratio and production charge asymmetry are also reported. Results are compared with theoretical predictions at next-to-next-to-leading order in perturbative quantum chromodynamics. Finally, in a precise test of lepton universality, the ratio of boson branching fractions is determined to be \begin{align*} \begin{split} \mathcal{B}(W \to e\nu)/\mathcal{B}(W \to \mu\nu)=1.020\pm 0.002\pm 0.019, \end{split} \end{align*} where the first uncertainty is statistical and the second is systematic.A measurement of the cross-section for production in collisions is presented using data corresponding to an integrated luminosity of fb collected by the LHCb experiment at a centre-of-mass energy of TeV. The electrons are required to have more than GeV of transverse momentum and to lie between 2.00 and 4.25 in pseudorapidity. The inclusive production cross-sections, where the decays to , are measured to be \begin{equation*} \sigma_{W^{+} \to e^{+}\nu_{e}}=1124.4\pm 2.1\pm 21.5\pm 11.2\pm 13.0\,\mathrm{pb}, \end{equation*} \begin{equation*} \sigma_{W^{-} \to e^{-}\bar{\nu}_{e}}=\,\,\,809.0\pm 1.9\pm 18.1\pm\,\,\,7.0\pm \phantom{0}9.4\,\mathrm{pb}, \end{equation*} where the first uncertainties are statistical, the second are systematic, the third are due to the knowledge of the LHC beam energy and the fourth are due to the luminosity determination. Differential cross-sections as a function of the electron pseudorapidity are measured. The cross-section ratio and production charge asymmetry are also reported. Results are compared with theoretical predictions at next-to-next-to-leading order in perturbative quantum chromodynamics. Finally, in a precise test of lepton universality, the ratio of boson branching fractions is determined to be \begin{equation*} \mathcal{B}(W \to e\nu)/\mathcal{B}(W \to \mu\nu)=1.020\pm 0.002\pm 0.019, \end{equation*} where the first uncertainty is statistical and the second is systematic.A measurement of the cross-section for W → eν production in pp collisions is presented using data corresponding to an integrated luminosity of 2 fb collected by the LHCb experiment at a centre-of-mass energy of TeV. The electrons are required to have more than 20 GeV of transverse momentum and to lie between 2.00 and 4.25 in pseudorapidity. The inclusive W production cross-sections, where the W decays to eν, are measured to be where the first uncertainties are statistical, the second are systematic, the third are due to the knowledge of the LHC beam energy and the fourth are due to the luminosity determination
Measurement of the B0s→μ+μ− Branching Fraction and Effective Lifetime and Search for B0→μ+μ− Decays
A search for the rare decays Bs0→μ+μ- and B0→μ+μ- is performed at the LHCb experiment using data collected in pp collisions corresponding to a total integrated luminosity of 4.4  fb-1. An excess of Bs0→μ+μ- decays is observed with a significance of 7.8 standard deviations, representing the first observation of this decay in a single experiment. The branching fraction is measured to be B(Bs0→μ+μ-)=(3.0±0.6-0.2+0.3)×10-9, where the first uncertainty is statistical and the second systematic. The first measurement of the Bs0→μ+μ- effective lifetime, τ(Bs0→μ+μ-)=2.04±0.44±0.05  ps, is reported. No significant excess of B0→μ+μ- decays is found, and a 95% confidence level upper limit, B(B0→μ+μ-)<3.4×10-10, is determined. All results are in agreement with the standard model expectations.A search for the rare decays and is performed at the LHCb experiment using data collected in collisions corresponding to a total integrated luminosity of 4.4 fb. An excess of decays is observed with a significance of 7.8 standard deviations, representing the first observation of this decay in a single experiment. The branching fraction is measured to be , where the first uncertainty is statistical and the second systematic. The first measurement of the effective lifetime, ps, is reported. No significant excess of decays is found and a 95 % confidence level upper limit, , is determined. All results are in agreement with the Standard Model expectations
Measurements of prompt charm production cross-sections in pp collisions at TeV
Production cross-sections of prompt charm mesons are measured using data from collisions at the LHC at a centre-of-mass energy of TeV. The data sample corresponds to an integrated luminosity of pb collected by the LHCb experiment. The production cross-sections of , , , and mesons are measured in bins of charm meson transverse momentum, , and rapidity, . They cover the rapidity range and transverse momentum ranges for and and for and mesons. The inclusive cross-sections for the four mesons, including charge-conjugate states, within the range of are determined to be \begin{equation*} \sigma(pp\rightarrow D^0 X) = 1190 \pm 3 \pm 64\,\mu\text{b} \end{equation*} \begin{equation*} \sigma(pp\rightarrow D^+ X) = 456 \pm 3 \pm 34\,\mu\text{b} \end{equation*} \begin{equation*} \sigma(pp\rightarrow D_s^+ X) = 195 \pm 4 \pm 19\,\mu\text{b} \end{equation*} \begin{equation*} \sigma(pp\rightarrow D^{*+} X)= 467 \pm 6 \pm 40\,\mu\text{b} \end{equation*} where the uncertainties are statistical and systematic, respectively.Production cross-sections of prompt charm mesons are measured using data from pp collisions at the LHC at a centre-of-mass energy of 5 TeV. The data sample corresponds to an integrated luminosity of 8.60 ± 0.33 pb collected by the LHCb experiment. The production cross-sections of D, D, D , and D mesons are measured in bins of charm meson transverse momentum, p, and rapidity, y. They cover the rapidity range 2.0 < y < 4.5 and transverse momentum ranges 0 < p < 10 GeV/c for D and D and 1 < p < 10 GeV/c for D and D mesons. The inclusive cross-sections for the four mesons, including charge-conjugate states, within the range of 1 < p < 8 GeV/c are determined to be where the uncertainties are statistical and systematic, respectively.Production cross-sections of prompt charm mesons are measured using data from collisions at the LHC at a centre-of-mass energy of TeV. The data sample corresponds to an integrated luminosity of pb collected by the LHCb experiment. The production cross-sections of , , , and mesons are measured in bins of charm meson transverse momentum, , and rapidity, . They cover the rapidity range and transverse momentum ranges for and and for and mesons. The inclusive cross-sections for the four mesons, including charge-conjugate states, within the range of are determined to be \sigma(pp\rightarrow D^0 X) = 1004 \pm 3 \pm 54\,\mu\text{b} \sigma(pp\rightarrow D^+ X) = 402 \pm 2 \pm 30\,\mu\text{b} \sigma(pp\rightarrow D_s^+ X) = 170 \pm 4 \pm 16\,\mu\text{b} \sigma(pp\rightarrow D^{*+} X)= 421 \pm 5 \pm 36\,\mu\text{b} where the uncertainties are statistical and systematic, respectively
Modèles d'analyse d'entreprises de polyculture-élevage bovin. Données technico-économiques de base region du bassin de Rennes (France) = Models for analysis mixed crop and cattle farms. Basic techno-economic data-district of Rennes basin (France). Information on agriculture 37, August 1977
Assessment of a grain oriented wound core transformer for solid state converter
International audienceThe increasing part of intermittent renewable energy requires significant modifications of the electric grid. The introduction of smart nodes, where the power transfer can be adjusted in real time in addition to the classical voltage change and the galvanic isolation, becomes an important asset for the grid balance. Transformers associated with power electronic converters can ensure this function; they are known generically as Solid-State Transformers (SST). Their high specific power also opens opportunities for railway application. SSTs can be operated at high frequencies (a few tens of kHz), with ferrite or nanocrystalline cores operating at low flux densities. The paper proposes a complementary approach that consists in using transformers built with grain oriented electrical steel (GOES) wound cores, operating at medium frequencies (few kHz) and high flux densities. The reported work focuses on experimental assessment aiming to show that this option is now open for designing SST cells, which can be associated to reach bigger units
Design and assessment of a Solid-State Transformer built around a thin grain oriented electrical steel wound core
International audienceThe increasing part of intermittent renewable energy requi res significant modifications of the electric grid. The introduction of smart nodes, where the power transfer can be adjusted in real time in addition to the classical voltage change and the galvanic isolation, becomes an important asset for the grid balance. Transformers associated to power electronic converters can ensure this function, they are known generically as Solid-State Transformers (SST). Their high specific power also opens opportunities for railway application. SSTs can work at high frequencies (a few tenth of kHz), with complex PWM topologies that generate complex waveforms approaching to sines, and transformers built with ferrite or nanocrystalline cores operating at low flux densities. The paper proposes a complementary approach that consists in using simple converters topologies working in square waves and transformers operating at medium frequencies (MF), around a few kHz and high flux densities. The cores are made of wound cores made of thin grain-oriented electrical steel (GOES). The proposed technology can be easily transposed to high powers units whilst maintaining a good technical-economic balance
- …