9,095 research outputs found

    Superconductivity and short range order in metallic glasses Fex_{x}Ni1x_{1-x}Zr2_{2}

    Full text link
    In amorphous superconductors, superconducting and vortex pinning properties are strongly linked to the absence of long range order. Consequently, superconductivity and vortex phases can be studied to probe the underlying microstructure and order of the material. This is done here from resistance and local magnetization measurements in the superconducting state of Fex_{x}Ni1x_{1-x}Zr2_{2} metallic glasses with 0x0.60\leq x \leq 0.6. Firstly, we present typical superconducting properties such as the critical temperature and fields and their dependence on Fe content in these alloys. Then, the observations of peculiar clockwise hysteresis loops, wide double-step transitions and large magnetization fluctuations in glasses containing a large amount of Fe are analyzed to reveal a change in short range order with Fe content.Comment: 8 pages, 7 figure

    High-quality ion beams by irradiating a nano-structured target with a petawatt laser pulse

    Full text link
    We present a novel laser based ion acceleration scheme, where a petawatt circularly polarized laser pulse is shot on an ultra-thin (nano-scale) double-layer target. Our scheme allows the production of high-quality light ion beams with both energy and angular dispersion controllable by the target properties. We show that extraction of all electrons from the target by radiation pressure can lead to a very effective two step acceleration process for light ions if the target is designed correctly. Relativistic protons should be obtainable with pulse powers of a few petawatt. Careful analytical modeling yields estimates for characteristic beam parameters and requirements on the laser pulse quality, in excellent agreement with one and two-dimensional Particle-in Cell simulations.Comment: 18 pages, 7 figures, accepted in New. J. Phy

    Zero kinetic energy-pulsed field ionization and resonance enhanced multiphoton ionization photoelectron spectroscopy: Ionization dynamics of Rydberg states in HBr

    Get PDF
    The results of rotationally resolved resonance enhanced multiphoton ionization photoelectron spectroscopy and zero kinetic energy‐pulsed field ionization studies on HBr via various rotational levels of the F^ 1Δ_2 and f^ 3Δ_2 Rydberg states are reported. These studies lead to an accurate determination of the lowest ionization threshold as 94 098.9±1 cm^(−1). Observed rotational and spin–orbit branching ratios are compared to the results of ab initio calculations. The differences between theory and experiment highlight the dominant role of rotational and spin–orbit interactions for the dynamic properties of the high‐n Rydberg states involved in the pulsed field ionization process

    High resolution pore size analysis in metallic powders by X-ray tomography

    Get PDF
    The deployment of additive manufacturing processes relies on part quality, specifically the absence of internal defects. Some of those defects have been associated with porosities in the powder feedstock. Since the level of porosity in the powder is generally very low, standard characterisation techniques such as pycnometry and metallography are not suitable for quantification. However, the quantification of such micro sized porosity in metallic powders is crucial to better understand the potential source of internal defects in final components and for quality control purposes. X-ray tomography with a 3 μm resolution offers the possibility to visualise pores in large volume of powder and to quantify their geometrical features and volume fraction using image analysis routines. This combination is unique and demonstrates the power of the approach in comparison to standard powder characterisation techniques. Results presented show the prospects and limits of this technique depending on the imaging device, material and image analysis procedure

    Impact of aging on the sintering behavior of bioactive-glass powder

    Get PDF
    Bioactive glasses (BGs) have been successfully used for several years as bone graft substitutes to fill defects and augment bone structures in orthopedic and dental procedures. Despite recent advances in the fabrication of reliable 3D scaffolds based on BG, the reproducibility of fabrication has only been marginally addressed and remains a challenge for their application. Recent studies have shown that BGs can react with moisture and atmospheric CO2 to form carbonates, affecting the properties and structure of the final product. In this study, factors that can affect the sintering behavior of BG powders were identified and investigated. A statistical analysis was then performed to optimize the BG sintering process, which revealed the possibility of obtaining BG scaffolds with reproducible density by acting on controllable factors such as aging and drying. In practice, this can be achieved by controlling the atmosphere during processing, handling, and storage of the material

    Tuning the exciton g-factor in single InAs/InP quantum dots

    Full text link
    Photoluminescence data from single, self-assembled InAs/InP quantum dots in magnetic fields up to 7 T are presented. Exciton g-factors are obtained for dots of varying height, corresponding to ground state emission energies ranging from 780 meV to 1100 meV. A monotonic increase of the g-factor from -2 to +1.2 is observed as the dot height decreases. The trend is well reproduced by sp3 tight binding calculations, which show that the hole g-factor is sensitive to confinement effects through orbital angular momentum mixing between the light-hole and heavy-hole valence bands. We demonstrate tunability of the exciton g-factor by manipulating the quantum dot dimensions using pyramidal InP nanotemplates

    Treatment of endometriosis by aromatase inhibitors: efficacy and side effects

    Get PDF
    The recent demonstration that aromatase is expressed at higher levels in endometriosis implants than in normal endometrium has led to pilot studies using inhibitor aromatasis in patients with endometriosis. We conducted a systematic review of the literature and studied the efficacy of aromatase inhibitors on endometriosis. There were seventeen studies (case reports/series) evaluating outcomes of aromatase inhibitors. Studies suggest that aromatase inhibitors alone or co-administered with progestins, oral contraceptives or gonadotrophin releasing hormone (GnRH) agonist could reduce pain and endometriosis. There is only one randomized controlled trial comparing aromatase inhibitor+GnRH agonist and GnRH agonist and one study with eighty patients. Side-effects profiles of aromatase inhibitor regimens are favorable; it does not appear a significant bone loss. Aromatase inhibitors seem to have a promising effect on endometriosis but randomized controlled trials are needed to prove their effects and their safety

    How does the substrate affect the Raman and excited state spectra of a carbon nanotube?

    Full text link
    We study the optical properties of a single, semiconducting single-walled carbon nanotube (CNT) that is partially suspended across a trench and partially supported by a SiO2-substrate. By tuning the laser excitation energy across the E33 excitonic resonance of the suspended CNT segment, the scattering intensities of the principal Raman transitions, the radial breathing mode (RBM), the G-mode and the D-mode show strong resonance enhancement of up to three orders of magnitude. In the supported part of the CNT, despite a loss of Raman scattering intensity of up to two orders of magnitude, we recover the E33 excitonic resonance suffering a substrate-induced red shift of 50 meV. The peak intensity ratio between G-band and D-band is highly sensitive to the presence of the substrate and varies by one order of magnitude, demonstrating the much higher defect density in the supported CNT segments. By comparing the E33 resonance spectra measured by Raman excitation spectroscopy and photoluminescence (PL) excitation spectroscopy in the suspended CNT segment, we observe that the peak energy in the PL excitation spectrum is red-shifted by 40 meV. This shift is associated with the energy difference between the localized exciton dominating the PL excitation spectrum and the free exciton giving rise to the Raman excitation spectrum. High-resolution Raman spectra reveal substrate-induced symmetry breaking, as evidenced by the appearance of additional peaks in the strongly broadened Raman G band. Laser-induced line shifts of RBM and G band measured on the suspended CNT segment are both linear as a function of the laser excitation power. Stokes/anti-Stokes measurements, however, reveal an increase of the G phonon population while the RBM phonon population is rather independent of the laser excitation power.Comment: Revised manuscript, 20 pages, 8 figure
    corecore