109,467 research outputs found
Lasers incorporating 2D photonic bandgap mirrors
Semiconductor lasers incorporating a 2D photonic lattice as a one end mirror in a Fabry-Perot cavity are demonstrated. The photonic lattice is a 2D hexagonal close-packed array with a lattice constant of 220 nm. Pulsed threshold currents of 110 mA were observed from a 180 μm laser
Two-dimensional photonic band-gap mirrors at 850 and 980 nm
Summary form only given. Photonic band-gap (PBG) crystals can be fabricated in semiconductor devices through the etching of patterns of holes in the device, resulting in a periodic dielectric structure. One of the more practical uses of photonic crystals in optoelectronic devices is for thin, high-reflectivity mirrors. The use of hexagonal arrays of etched circular holes results in a 2-D photonic band-gap mirror that can be tuned to a specific wavelength by varying the hole radius and the lattice spacing. 2-D mirror characterization is performed by evaluating the light emission from an active waveguide
Installation effects of long-duct pylon-mounted nacelles on a twin-jet transport model with swept supercritical wing
The installation interference effects of an underwing-mounted, long duct, turbofan nacelle were evaluated in the Langley 16-Foot Transonic Tunnel with two different pylon shapes installed on a twin engine transport model having a supercritical wing swept 30 deg. Wing, pylon, and nacelle pressures and overall model force data were obtained at Mach numbers from 0.70 to 0.83 and nominal angles of attack from -2 deg to 4 deg at an average unit Reynolds number of 11.9 x 1,000,000 per meter. The results show that adding the long duct nacelles to the supercritical wing, in the near sonic flow field, changed the magnitude and direction of flow velocities over the entire span, significantly reduced cruise lift, and caused large interference drag on the nacelle afterbody
Weighted feature selection criteria for visual servoing of a telerobot
Because of the continually changing environment of a space station, visual feedback is a vital element of a telerobotic system. A real time visual servoing system would allow a telerobot to track and manipulate randomly moving objects. Methodologies for the automatic selection of image features to be used to visually control the relative position between an eye-in-hand telerobot and a known object are devised. A weighted criteria function with both image recognition and control components is used to select the combination of image features which provides the best control. Simulation and experimental results of a PUMA robot arm visually tracking a randomly moving carburetor gasket with a visual update time of 70 milliseconds are discussed
Zirconia toughened SiC whisker reinforced alumina composites small business innovation research
The objective of this phase 1 project was to develop a ceramic composite with superior fracture toughness and high strength, based on combining two toughness inducing materials: zirconia for transformation toughening and SiC whiskers for reinforcement, in a controlled microstructure alumina matrix. The controlled matrix microstructure is obtained by controlling the nucleation frequency of the alumina gel with seeds (submicron alpha-alumina). The results demonstrate the technical feasibility of producing superior binary composites (Al2O3-ZrO2) and tertiary composites (Al2O3-ZrO2-SiC). Thirty-two composites were prepared, consolidated, and fracture toughness tested. Statistical analysis of the results showed that: (1) the SiC type is the key statistically significant factor for increased toughness; (2) sol-gel processing with a-alumina seed had a statistically significant effect on increasing toughness of the binary and tertiary composites compared to the corresponding mixed powder processing; and (3) ZrO2 content within the range investigated had a minor effect. Binary composites with an average critical fracture toughness of 6.6MPam sup 1/2, were obtained. Tertiary composites with critical fracture toughness in the range of 9.3 to 10.1 MPam sup 1/2 were obtained. Results indicate that these composites are superior to zirconia toughened alumina and SiC whisker reinforced alumina ceramic composites produced by conventional techniques with similar composition from published data
Pseudorandom Generators for Width-3 Branching Programs
We construct pseudorandom generators of seed length that -fool ordered read-once branching programs
(ROBPs) of width and length . For unordered ROBPs, we construct
pseudorandom generators with seed length . This is the first improvement for pseudorandom
generators fooling width ROBPs since the work of Nisan [Combinatorica,
1992].
Our constructions are based on the `iterated milder restrictions' approach of
Gopalan et al. [FOCS, 2012] (which further extends the Ajtai-Wigderson
framework [FOCS, 1985]), combined with the INW-generator [STOC, 1994] at the
last step (as analyzed by Braverman et al. [SICOMP, 2014]). For the unordered
case, we combine iterated milder restrictions with the generator of
Chattopadhyay et al. [CCC, 2018].
Two conceptual ideas that play an important role in our analysis are: (1) A
relabeling technique allowing us to analyze a relabeled version of the given
branching program, which turns out to be much easier. (2) Treating the number
of colliding layers in a branching program as a progress measure and showing
that it reduces significantly under pseudorandom restrictions.
In addition, we achieve nearly optimal seed-length
for the classes of: (1) read-once polynomials on
variables, (2) locally-monotone ROBPs of length and width
(generalizing read-once CNFs and DNFs), and (3) constant-width ROBPs of length
having a layer of width in every consecutive
layers.Comment: 51 page
The Wendelstein Calar Alto Pixellensing Project (WeCAPP): the M31 Nova catalogue
We present light curves from the novae detected in the long-term, M31
monitoring WeCAPP project. The goal of WeCAPP is to constrain the compact dark
matter fraction of the M31 halo with microlensing observations. As a by product
we have detected 91 novae benefiting from the high cadence and highly sensitive
difference imaging technique required for pixellensing. We thus can now present
the largest CCD and optical filters based nova light curve sample up-to-date
towards M31. We also obtained thorough coverage of the light curve before and
after the eruption thanks to the long-term monitoring. We apply the nova
taxonomy proposed by Strope et al. (2010) to our nova candidates and found 29
S-class novae, 10 C-class novae, 2 O-class novae and 1 J-class nova. We have
investigated the universal decline law advocated by Hachichu and Kato (2006) on
the S-class novae. In addition, we correlated our catalogue with the literature
and found 4 potential recurrent novae. Part of our catalogue has been used to
search for optical counter-parts of the super soft X-ray sources detected in
M31 (Pietsch et al. 2005). Optical surveys like WeCAPP, and coordinated with
multi-wavelength observation, will continue to shed light on the underlying
physical mechanism of novae in the future.Comment: 15 pages, 15 figures, 7 tables, A&A accepted for publication. The
appendix is stored in the Data Conservanc
- …