Numerical methods for analyzing electromagnetic scattering

Numerical methods to analyze electromagnetic scattering are presented. The dispersions and attenuations of the normal modes in a circular waveguide coated with lossy material were completely analyzed. The radar cross section (RCS) from a circular waveguide coated with lossy material was calculated. The following is observed: (1) the interior irradiation contributes to the RCS much more than does the rim diffraction; (2) at low frequency, the RCS from the circular waveguide terminated by a perfect electric conductor (PEC) can be reduced more than 13 dB down with a coating thickness less than 1% of the radius using the best lossy material available in a 6 radius-long cylinder; (3) at high frequency, a modal separation between the highly attenuated and the lowly attenuated modes is evident if the coating material is too lossy, however, a large RCS reduction can be achieved for a small incident angle with a thin layer of coating. It is found that the waveguide coated with a lossy magnetic material can be used as a substitute for a corrugated waveguide to produce a circularly polarized radiation yield

Numerical methods for analyzing electromagnetic scattering

Attenuation properties of the normal modes in an overmoded waveguide coated with a lossy material were analyzed. It is found that the low-order modes, can be significantly attenuated even with a thin layer of coating if the coating material is not too lossy. A thinner layer of coating is required for large attenuation of the low-order modes if the coating material is magnetic rather than dielectric. The Radar Cross Section (RCS) from an uncoated circular guide terminated by a perfect electric conductor was calculated and compared with available experimental data. It is confirmed that the interior irradiation contributes to the RCS. The equivalent-current method based on the geometrical theory of diffraction (GTD) was chosen for the calculation of the contribution from the rim diffraction. The RCS reduction from a coated circular guide terminated by a PEC are planned schemes for the experiments are included. The waveguide coated with a lossy magnetic material is suggested as a substitute for the corrugated waveguide

Wave attenuation and mode dispersion in a waveguide coated with lossy dielectric material

The modal attenuation constants in a cylindrical waveguide coated with a lossy dielectric material are studied as functions of frequency, dielectric constant, and thickness of the dielectric layer. A dielectric material best suited for a large attenuation is suggested. Using Kirchhoff's approximation, the field attenuation in a coated waveguide which is illuminated by a normally incident plane wave is also studied. For a circular guide which has a diameter of two wavelengths and is coated with a thin lossy dielectric layer (omega sub r = 9.1 - j2.3, thickness = 3% of the radius), a 3 dB attenuation is achieved within 16 diameters

Space shuttle contamination due to backflow from control motor exhaust

Spacecraft contamination of the space shuttle orbiter and accompanying Spacelab payloads is studied. The scattering of molecules from the vernier engines and flash evaporator nozzle after impingement on the orbiter wing surfaces, and the backflow of molecules out of the flash evaporator nozzle plume flow field due to intermolecular collisions in the plume are the problems discussed. A method was formulated for dealing with these problems, and detailed results are given

Characterization of the residual stresses in spray-formed steels using neutron diffraction

Neutron diffraction was used to characterize the residual stresses in an as-sprayed tube-shaped steel preform. The measured residual stress distributions were compared with those simulated using finite element method by taking into account the effects of the thermal history, porosity and different phases of the sprayed preform. The porosity was measured using X-ray microcomputed tomography. The study revealed for the first time the correlation between the distribution of porosity and residual stress developed in the as-sprayed preform

Dynamical Coupled-Channels Effects on Pion Photoproduction

The electromagnetic pion production reactions are investigated within the dynamical coupled-channels model developed in {\bf Physics Reports, 439, 193 (2007)}. The meson-baryon channels included in this study are $\gamma N$, $\pi N$, $\eta N$, and the $\pi\Delta$, $\rho N$ and $\sigma N$ resonant components of the $\pi\pi N$ channel. With the hadronic parameters of the model determined in a recent study of $\pi N$ scattering, we show that the pion photoproduction data up to the second resonance region can be described to a very large extent by only adjusting the bare $\gamma N \to N^*$ helicity amplitudes, while the non-resonant electromagnetic couplings are taken from previous works. It is found that the coupled-channels effects can contribute about 10 - 20 % of the production cross sections in the $\Delta$ (1232) resonance region, and can drastically change the magnitude and shape of the cross sections in the second resonance region. The importance of the off-shell effects in a dynamical approach is also demonstrated. The meson cloud effects as well as the coupled-channels contributions to the $\gamma N \to N^*$ form factors are found to be mainly in the low $Q^2$ region. For the magnetic M1 $\gamma N \to \Delta$ (1232) form factor, the results are close to that of the Sato-Lee Model. Necessary improvements to the model and future developments are discussed.Comment: Corrected version. 14 pages, 10 figure

Mass matrices and eigenstates for scalars / pseudoscalars; indirect CP violation, mass hierarchies and symmetry breaking

I study indirect CP violation for neutral kaons, and extend it to large values of the CP-violating parameter (taken to be real). I show how and at which condition there can exist a continuous set of basis in which the kinetic and mass terms in the Lagrangian can be diagonalized simultaneously. An ambiguity results for the mass spectrum, which then depends on the basis. In particular, for fixed (positive) (mass)^2 of the CP eigenstates K^0_1, K^0_2, and for certain ranges of values of the CP-violating parameter, a negative (mass)^2 can arise in the CP-violating basis. Under certain conditions, even a small perturbation, by lifting the ambiguity, can strongly alter the pattern of masses. These investigations extend in a natural way to indirect CP violation among a set of Higgs-like doublets. The C-odd commutator [K^0, K^0 bar], or its equivalent for Higgs multiplets, plays an important role. The condition for its vanishing and its consequences are among the main concerns of this work.Comment: LaTeX2e, 35 pages, 10 postscript figures + 1 log

Feynman Rules in the Type III Natural Flavour-Conserving Two-Higgs Doublet Model

We consider a two Higgs-doublet model with $S_3$ symmetry, which implies a $\pi \over 2$ rather than 0 relative phase between the vacuum expectation values $$and$$. The corresponding Feynman rules are derived accordingly and the transformation of the Higgs fields from the weak to the mass eigenstates includes not only an angle rotation but also a phase transformation. In this model, both doublets couple to the same type of fermions and the flavour-changing neutral currents are naturally suppressed. We also demonstrate that the Type III natural flavour-conserving model is valid at tree-level even when an explicit $S_3$ symmetry breaking perturbation is introduced to get a reasonable CKM matrix. In the special case $\beta = \alpha$, as the ratio $\tan\beta = {v_2 \over v_1}$ runs from 0 to $\infty$, the dominant Yukawa coupling will change from the first two generations to the third generation. In the Feynman rules, we also find that the charged Higgs currents are explicitly left-right asymmetric. The ratios between the left- and right-handed currents for the quarks in the same generations are estimated.Comment: 16 pages (figures not included), NCKU-HEP/93-1