Slow slip source characterized by lithological and geometric heterogeneity

Slow slip events (SSEs) accommodate a significant proportion of tectonic plate motion at subduction zones, yet little is known about the faults that actually host them. The shallow depth (<2 km) of well-documented SSEs at the Hikurangi subduction zone offshore New Zealand offers a unique opportunity to link geophysical imaging of the subduction zone with direct access to incoming material that represents the megathrust fault rocks hosting slow slip. Two recent International Ocean Discovery Program Expeditions sampled this incoming material before it is entrained immediately down-dip along the shallow plate interface. Drilling results, tied to regional seismic reflection images, reveal heterogeneous lithologies with highly variable physical properties entering the SSE source region. These observations suggest that SSEs and associated slow earthquake phenomena are promoted by lithological, mechanical, and frictional heterogeneity within the fault zone, enhanced by geometric complexity associated with subduction of rough crust

Borehole stress indicators across the Hikurangi Subduction Margin: Preliminary insights from IODP Expedition 372

The Hikurangi Subduction Margin was the recent focus of two IODP expeditions seeking to explore the cause and effect of slow slip earthquake generation at this plate boundary. Characterising the stress field across the Hikurangi Subduction Margin is a crucial element of to understanding the relationship between the contemporary in-situ stress state, active and inactive structures along the subduction front, and fluid pressures and the observed spatial variation in subduction behaviour. Existing stress observations rely on earthquake focal mechanisms and limited onshore borehole data from industry wells on the overriding plate. Reported pore pressures within the over-riding plate are often close to vertical stress magnitudes at shallow depths. Variability of in-situ stress orientations occur along strike of the subduction trench, with a subduction trench parallel SHmax in the south transitioning to a plate motion parallel, trench-oblique SHmax further north. This spatially correlates with observed changes in subduction interface coupling and earthquake behaviour. Here we present new stress field orientation data acquired from resistivity image logging carried out in IODP Expedition 372 using the logging while drilling GeoVision Resistivity tool. We report Shmin orientations from borehole breakout observations of N-S at Site U1518 near the deformation front, and NW-SE from Site U1519 within the upper plate. These data represent the first estimates of stress field orientation (from drilling data) in the outer forarc, near the deformation front of the Hikurangi Margin, an area characterised by shallow slow slip

Stress orientation variability along the Hikurangi Subduction Margin: Insights from borehole image logging

&amp;lt;p&amp;gt;The Hikurangi Subduction Margin (HSM) of New Zealand is well-known for its variable seismic behaviour along strike, and across the Pacific-Australian subduction interface. Pacific-Australian plate motion is accommodated by a combination of slow slip and normal seismic events. The mechanics of slow slip earthquakes and their relationship to normal earthquakes are not well constrained, and so they represent a challenge to the development of hazard models for this region of New Zealand.Variability in a number of aspects of the stress state along the HSM may play a role in controlling the observed spatially variable seismic behaviour. Here we present preliminary analysis of stress orientation information from borehole image logs acquired from oil and gas exploration wells, and scientific wells drilled as part IODP Expedition 372. Orientations of borehole breakouts (BOs) and drilling-induced tensile fractures (DITFs) from these image logs are used to determine orientations of the minimum and maximum horizontal stress directions respectively within the upper 3 km of the over-riding Australian Plate (hanging wall of the HSM subduction interface). Our analysis reveals that present day maximum horizontal compressive stress orientation (SHmax) within the subduction hangingwall varies along the HSM strike, from NE-SW (oblique to Pacific-Australian plate motion, parallel to HSM strike) in the northern HSM, to NW-SE (oblique to Pacific-Australian plate motion and HSM strike) in the southern HSM. Some deviation from this trend can be observed in both regions. At the frontal thrust in the northern HSM, SHmax is oriented N-S, and in the southern HSM one well shows a shallow E-W oriented SHmax. The borehole image log SHmax orientations in the northern HSM are consistent with SHmax orientations derived from shallow focal mechanism inversion. In contrast, borehole image logs SHmax orientations in the south of HSM are oblique to focal mechanisms derived shallow SHmax orientations. Borehole SHmax orientations are compatible with the maximum horizontal contraction strain rate direction determined from campaign GPS surface velocities, though in the southern HSM multiple directions are determined from this technique. The difference in stress orientations along the HSM is consistent with the variation in seismic behaviour linked to changes in coupling at the subduction interface. Interestingly, it is the southern HSM, where the subduction interface is considered strongly coupled, that stress field orientations are not consistent with depth and show variability. In the northern HSM, where the subduction interface is considered to be weakly coupled, stress orientations appear broadly consistent with depth.&amp;amp;#160;&amp;lt;/p&amp;gt; </jats:p

International ocean discovery program expedition 375 preliminary report: Hikurangi subduction margin coring and observatories unlocking the secrets of slow slip through drilling to sample and monitor the forearc and subducting plate

Slow slip events (SSEs) at the northern Hikurangi subduction margin, New Zealand, are among the best-documented shallow SSEs on Earth. International Ocean Discovery Program Expedition 375 was undertaken to investigate the processes and in situ conditions that underlie subduction zone SSEs at the northern Hikurangi Trough by (1) coring at four sites, including an active fault near the deformation front, the upper plate above the high-slip SSE sourc e region, and the incoming sedimentary succession in the Hikurangi Trough and atop the Tūranganui Knoll Seamount, and (2) installing borehole observatories in an active thrust near the deformation front and in the upper plate overlying the slow slip source region. Logging-while-drilling (LWD) data for this project were acquired as part of Expedition 372 (26 November 2017-4 January 2018; see th e Expedition 372 Preliminary Report for further details on the LWD acquisition program). Northern Hikurangi subduction margin SSEs recur every 1-2 years and thus provide an ideal opportunity to monitor deformation and associated changes in chemical and physical properties throughout the slow slip cycle. Sampling of material from the sedimentary section and oceanic basement of the subducting plate reveals the rock properties, composition, lithology, and structural character of material that is transported downdip into the SSE source region. A recent seafloor geodetic experiment raises the possibility that SSEs at northern Hikurangi may propagate all the way to the trench, indicating that the shallow thrust fault zone targeted during Expedition 375 may also lie in the SSE rupture area. Hence, sampling at this location provides insights into the composition, physical properties, and architecture of a shallow fault that may host slow slip. Expedition 375 (together with the Hikurangi subduction LWD component of Expedition 372) was designed to address three fundamental scientific objectives: (1) characterize the state and composition of the incoming plate and shallow plate boundary fault near the trench, which comprise the protolith and initial conditions for fault zone rock at greater depth and which may itself host shallow slow slip; (2) characterize material properties, thermal regime, and stress conditions in the upper plate above the core of the SSE source region; and (3) install observatories at an active thrust near the deformation front and in the upper plate above the SSE source to measure temporal variations in deformation, temperature, and fluid flow. The observatories will monitor volumetric strain (via pore pressure as a proxy) and the evolution of physical, hydrological, and chemical properties throughout the SSE cycle. Together, the coring, logging, and observatory data will test a suite of hypotheses about the fundamental mechanics and behavior of SSEs and their relationship to great earthquakes along the subduction interface

Slow slip source characterized by lithological and geometric heterogeneity

Slow slip events (SSEs) accommodate a significant proportion of tectonic plate motion at subduction zones, yet little is known about the faults that actually host them. The shallow depth (<2 km) of well-documented SSEs at the Hikurangi subduction zone offshore New Zealand offers a unique opportunity to link geophysical imaging of the subduction zone with direct access to incoming material that represents the megathrust fault rocks hosting slow slip. Two recent International Ocean Discovery Program Expeditions sampled this incoming material before it is entrained immediately down-dip along the shallow plate interface. Drilling results, tied to regional seismic reflection images, reveal heterogeneous lithologies with highly variable physical properties entering the SSE source region. These observations suggest that SSEs and associated slow earthquake phenomena are promoted by lithological, mechanical, and frictional heterogeneity within the fault zone, enhanced by geometric complexity associated with subduction of rough crust