The alkene monooxygenase from Xanthobacter Py2 is a binuclear non-haem iron protein closely related to toluene 4-monooxygenase

AbstractThe genes encoding the six polypeptide components of the alkene monooxygenase from Xanthobacter Py2 have been sequenced. The predicted amino acid sequence of the first ORF shows homology with the iron binding subunits of binuclear non-haem iron containing monooxygenases including benzene monooxygenase, toluene 4-monooxygenase (>60% sequence similarity) and methane monooxygenase (>40% sequence similarity) and that the necessary sequence motifs associated with iron co-ordination are also present. Secondary structure prediction based on the amino acid sequence showed that the predominantly α-helical structure that surrounds the binuclear iron binding site was conserved allowing the sequence to be modelled on the co-ordinates of the methane monooxygenase α-subunit. Significant differences in the residues forming the hydrophobic cavity which forms the substrate binding site are discussed with reference to the differences in reaction specificity and stereospecificity of binuclear non-haem iron monooxygenases

Translational arrest due to cytoplasmic redox stress delays adaptation to growth on methanol and heterologous protein expression in a typical fed-batch culture of Pichia pastoris

Results We have followed a typical fed-batch induction regime for heterologous protein production under the control of the AOX1 promoter using both microarray and metabolomic analysis. The genetic constructs involved 1 and 3 copies of the TRY1 gene, encoding human trypsinogen. In small-scale laboratory cultures, expression of the 3 copy-number construct induced the unfolded protein response (UPR) sufficiently that titres of extracellular trypsinogen were lower in the 3-copy construct than with the 1-copy construct. In the fed-batch-culture, a similar pattern was observed, with higher expression from the 1-copy construct, but in this case there was no significant induction of UPR with the 3-copy strain. Analysis of the microarray and metabolomic information indicates that the 3-copy strain was undergoing cytoplasmic redox stress at the point of induction with methanol. In this Crabtree-negative yeast, this redox stress appeared to delay the adaptation to growth on methanol and supressed heterologous protein production, probably due to a block in translation. Conclusion Although redox imbalance as a result of artificially imposed hypoxia has previously been described, this is the first time that it has been characterised as a result of a transient metabolic imbalance and shown to involve a stress response which can lead to translational arrest. Without detailed analysis of the underlying processes it could easily have been mis-interpreted as secretion stress, transmitted through the UPR

Continuous enzymatic hydrolysis of sugar beet pectin and l-arabinose recovery within an integrated biorefinery

Sugar beet pulp (SBP) fractionated by steam explosion, released sugar beet pectin (SB-pectin) which was selectively hydrolysed using a novel α-l-arabinofuranosidase (AF), yielding monomeric l-arabinose (Ara) and a galacturonic acid rich backbone (GABB). AF was immobilised on an epoxy-functionalised resin with 70% overall immobilisation yield. Pretreatment of SB-pectin, to remove coloured compounds, improved the stability of the immobilised AF, allowing its reutilisation for up to 10 reaction cycles in a stirred tank reactor. Continuous hydrolysis of SB-pectin was subsequently performed using a packed bed reactor (PBR) with immobilised AF. Reactor performance was evaluated using a Design of Experiment approach. Pretreated SB-pectin hydrolysis was run for 7 consecutive days maintaining 73% of PBR performance. Continuous separation of Ara from GABB was achieved by tangential flow ultrafiltration with 92% Ara recovery. These results demonstrate the feasibility of establishing a continuous bioprocess to obtain Ara from the inexpensive SBP biomass

PathwayBooster:a tool to support the curation of metabolic pathways

BACKGROUND: Despite several recent advances in the automated generation of draft metabolic reconstructions, the manual curation of these networks to produce high quality genome-scale metabolic models remains a labour-intensive and challenging task. RESULTS: We present PathwayBooster, an open-source software tool to support the manual comparison and curation of metabolic models. It combines gene annotations from GenBank files and other sources with information retrieved from the metabolic databases BRENDA and KEGG to produce a set of pathway diagrams and reports summarising the evidence for the presence of a reaction in a given organism’s metabolic network. By comparing multiple sources of evidence within a common framework, PathwayBooster assists the curator in the identification of likely false positive (misannotated enzyme) and false negative (pathway hole) reactions. Reaction evidence may be taken from alternative annotations of the same genome and/or a set of closely related organisms. CONCLUSIONS: By integrating and visualising evidence from multiple sources, PathwayBooster reduces the manual effort required in the curation of a metabolic model. The software is available online at http://www.theosysbio.bio.ic.ac.uk/resources/pathwaybooster/. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1186/s12859-014-0447-2) contains supplementary material, which is available to authorized users

Are eucalyptus harvest residues a truly burden-free biomass source for bioenergy? A deeper look into biorefinery process design and Life Cycle Assessment

With the advent of RenovaBio, Brazil has cast a new light towards the life cycle of cellulosic ethanol. Once considered a resource intensive alternative pathway to achieve the same biofuel, second-generation approaches can now provide an economic advantage due to their potentially lower carbon footprint. The exploration of lignocellulosic harvest residues to this end can be beneficial, since productivity can be increased while not expanding cultivated areas. Eucalyptus forest residues are an example, result of logging and harvest procedures, being a low-cost and readily available biomass. Through an integrated biorefinery process simulation and a Life Cycle Assessment of the coproduction of ethanol and electricity, it was analyzed whether forestry burden is truly relevant when exploring this material, identifying technical and environmental bottlenecks. The biorefinery design implementation of anaerobic digestion and energy integration allowed a productivity boost of 20% for ethanol and 115% for electricity. With a 80 km collection radius, an annual production capacity of 30.3 ML could be achieved in the Campinas region. Enzymes were identified as the main environmental hotspot, but inconsistent published datasets and lack of transparency lead to inconclusive results regarding this input. While the burden associated with the lignocellulosic feedstock is relevant in most impact categories, the main bottleneck resides within the biorefinery itself, with inputs related to pretreatment and hydrolysis, boiler emissions and water consumption. Nevertheless, eucalyptus harvest residues cannot be considered a burden-free resource, since additional operations such as retrieval and transportation cannot be dismissed and often surpasses the impact potential of the aforementioned forestry activities.</p

Rapid screening of cellular stress responses in recombinant Pichia pastoris strains using metabolite profiling

Heterologous protein production in the yeast Pichia pastoris can be limited by biological responses to high expression levels; the unfolded protein response (UPR) is a key determinant of the success of protein production in this organism. Here, we used untargeted NMR metabolic profiling (metabolomics) of a number of different recombinant strains, carried out in a miniaturized format suitable for screening-level experiments. We identified a number of metabolites (from both cell extracts and supernatants) which correlated well with UPR-relevant gene transcripts, and so could be potential biomarkers for future high-throughput screening of large numbers of P. pastoris clones.This study was wholly funded by the Bioprocessing Research Industry Club (BRIC), a partnership between BBSRC, EPSRC and a consortium of leading companies (http://www. bbsrc.ac.uk/business/collaborative-research/industry-clubs/bric/background.aspx, Grant reference BBF0049071)

Crystal structure of an inferred ancestral bacterial pyruvate decarboxylase

Pyruvate decarboxylase (PDC; EC 4.1.1.1) is a key enzyme in homofermentative metabolism where ethanol is the major product. PDCs are thiamine pyrophos­phate- and Mg2+ ion-dependent enzymes that catalyse the non-oxidative decarboxylation of pyruvate to acetaldehyde and carbon dioxide. As this enzyme class is rare in bacteria, current knowledge of bacterial PDCs is extremely limited. One approach to further the understanding of bacterial PDCs is to exploit the diversity provided by evolution. Ancestral sequence reconstruction (ASR) is a method of computational molecular evolution to infer extinct ancestral protein sequences, which can then be synthesized and experimentally characterized. Through ASR a novel PDC was generated, designated ANC27, that shares only 78% amino-acid sequence identity with its closest extant homologue (Komagataeibacter medellinensis PDC, GenBank accession No. WP_014105323.1), yet is fully functional. Crystals of this PDC diffracted to 3.5 Å resolution. The data were merged in space group P3221, with unit-cell parameters a = b = 108.33, c = 322.65 Å, and contained two dimers (two tetramer halves) in the asymmetric unit. The structure was solved by molecular replacement using PDB entry 2wvg as a model, and the final R values were Rwork = 0.246 (0.3671 in the highest resolution bin) and Rfree = 0.319 (0.4482 in the highest resolution bin). Comparison with extant bacterial PDCs supports the previously observed correlation between decreased tetramer interface area (and number of interactions) and decreased thermostability

Translational arrest due to cytoplasmic redox stress delays adaptation to growth on methanol and heterologous protein expression in a typical fed-batch culture of <i>Pichia pastoris</i>

<div><p>Results</p><p>We have followed a typical fed-batch induction regime for heterologous protein production under the control of the <i>AOX1</i> promoter using both microarray and metabolomic analysis. The genetic constructs involved 1 and 3 copies of the <i>TRY1</i> gene, encoding human trypsinogen. In small-scale laboratory cultures, expression of the 3 copy-number construct induced the unfolded protein response (UPR) sufficiently that titres of extracellular trypsinogen were lower in the 3-copy construct than with the 1-copy construct. In the fed-batch-culture, a similar pattern was observed, with higher expression from the 1-copy construct, but in this case there was no significant induction of UPR with the 3-copy strain. Analysis of the microarray and metabolomic information indicates that the 3-copy strain was undergoing cytoplasmic redox stress at the point of induction with methanol. In this Crabtree-negative yeast, this redox stress appeared to delay the adaptation to growth on methanol and supressed heterologous protein production, probably due to a block in translation.</p><p>Conclusion</p><p>Although redox imbalance as a result of artificially imposed hypoxia has previously been described, this is the first time that it has been characterised as a result of a transient metabolic imbalance and shown to involve a stress response which can lead to translational arrest. Without detailed analysis of the underlying processes it could easily have been mis-interpreted as secretion stress, transmitted through the UPR.</p></div

Rapid Intradermal Delivery of Liquid Formulations Using a Hollow Microstructured Array

Purpose The purpose of this work is to demonstrate rapid intradermal delivery of up to 1.5 mL of formulation using a hollow microneedle delivery device designed for self-application. Methods 3M’s hollow Microstructured Transdermal System (hMTS) was applied to domestic swine to demonstrate delivery of a variety of formulations including small molecule salts and proteins. Blood samples were collected after delivery and analyzed via HPLC or ELISA to provide a PK profile for the delivered drug. Site evaluations were conducted post delivery to determine skin tolerability. Results Up to 1.5 mL of formulation was infused into swine at a max rate of approximately 0.25 mL/min. A red blotch, the size of the hMTS array, was observed immediately after patch removal, but had faded so as to be almost indistinguishable 10 min post-patch removal. One-mL deliveries of commercial formulations of naloxone hydrochloride and human growth hormone and a formulation of equine anti-tetanus toxin were completed in swine. With few notable differences, the resulting PK profiles were similar to those achieved following subcutaneous injection of these formulations. Conclusions 3M’s hMTS can provide rapid, intradermal delivery of 300–1,500 µL of liquid formulations of small molecules salts and proteins, compounds not typically compatible with passive transdermal delivery. KEY WORDS transdermal drug delivery. microneedles. intradermal. hollow microstructures. MT