28,994 research outputs found
Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material
The laser beam absorption lengths of CO2, Nd:YAG and a high power diode laser (HPDL) radiation for a newly developed SiO2/Al2O3-based tile grout have been determined through the application of Beer-Lambertâs law. The findings revealed marked differences in the absorption lengths despite the material having similar beam absorption coefficients for the lasers. The absorption lengths for the SiO2/Al2O3-based tile grout for CO2, Nd:YAG and HPDL radiation were calculated as being 23211 m, 1934 m and 1838 m respectively. Moreover, this method of laser beam absorption length determination, which has hitherto been used predominantly with lasers operated in the pulsed mode, is shown to be valid for use with lasers operated in the continuous wave (CW) mode, depending upon the material being treated
The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system
As the field of laser materials processing becomes ever more diverse, the high power diode laser (HPDL) is now being regarded by many as the most applicable tool. The commercialisation of an industrial epoxy grout removal and single-stage ceramic tile grout sealing process is examined through the development of a hand-held HPDL device in this work. Further, an appraisal of the potential hazards associated with the use of the HPDL in an industrial environment and the solutions implemented to ensure that the system complies with the relevant safety standards are given. The paper describes the characteristics and feasibility of the industrial epoxy grout removal process. A minimum power density of approximately 3 kW/cm2 was found to exist, whilst the minimum interaction time, below which there was no removal of epoxy tile grout, was found to be approximately 0.5 s. The maximum theoretical removal rate that may be achievable was calculated as being 65.98 mm2/s for a circular 2 mm diameter beam with a power density of 3 kW/cm2 and a traverse speed of 42 mm/s. In addition, the characteristics of the single-stage ceramic tile grout sealing are outlined. The single-stage ceramic tile grout sealing process yielded crack and porosity free seals which were produced in normal atmospheric conditions. Tiles were successfully sealed with power densities as low as 550 W/cm2 and at rates of up to 420 mm/min. In terms of mechanical, physical and chemical characteristics, the single-stage ceramic tile grout was found to be far superior to the conventional epoxy tile grout and, in many instances, matched and occasionally surpassed that of the ceramic tiles themselves
Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic
Differences in the beam interaction characteristics of a CO2 laser, a Nd:YAG laser, a high power diode laser (HPDL) and an excimer laser with a partially stabilised zirconia (PSZ) bio-ceramic have been studied. A derivative of Beer-Lambertâs law was applied and the laser beam absorption lengths of the four lasers were calculated as 33.55 x 10-3 cm for the CO2 laser, 18.22 x 10-3 cm for the Nd:YAG laser, 17.17 x 10-3 cm for the HPDL and 8.41 x 10-6 cm for the excimer laser. It was determined graphically that the fluence threshold values at which significant material removal was effected by the CO2 laser, the Nd:YAG laser, the HPDL and the excimer laser were 52 J/cm2, 97 J/cm2, 115 J/cm2 and 0.48 J/cm2 respectively. The thermal loading value for the CO2 laser, the Nd:YAG laser, the HPDL and the excimer laser were calculated as being 1.55 kJ/cm3, 5.32 kJ/cm3, 6.69 kJ/cm3 and 57.04 kJ/cm3 respectively
Recommended from our members
Converting three-space matrices to equivalent six-space matrices for Delone scalars in S6.
The transformations from the primitive cells of the centered Bravais lattices to the corresponding centered cells have conventionally been listed as three-by-three matrices that transform three-space lattice vectors. Using those three-by-three matrices when working in the six-dimensional space of lattices represented as Selling scalars as used in Delone (Delaunay) reduction, one could transform to the three-space representation, apply the three-by-three matrices and then back-transform to the six-space representation, but it is much simpler to have the equivalent six-by-six matrices and apply them directly. The general form of the transformation from the three-space matrix to the corresponding matrix operating on Selling scalars (expressed in space S6) is derived, and the particular S6matrices for the centered Delone types are listed. (Note: in his later publications, Boris Delaunay used the Russian version of his surname, Delone.)
The joint large-scale foreground-CMB posteriors of the 3-year WMAP data
Using a Gibbs sampling algorithm for joint CMB estimation and component
separation, we compute the large-scale CMB and foreground posteriors of the
3-yr WMAP temperature data. Our parametric data model includes the cosmological
CMB signal and instrumental noise, a single power law foreground component with
free amplitude and spectral index for each pixel, a thermal dust template with
a single free overall amplitude, and free monopoles and dipoles at each
frequency. This simple model yields a surprisingly good fit to the data over
the full frequency range from 23 to 94 GHz. We obtain a new estimate of the CMB
sky signal and power spectrum, and a new foreground model, including a
measurement of the effective spectral index over the high-latitude sky. A
particularly significant result is the detection of a common spurious offset in
all frequency bands of ~ -13muK, as well as a dipole in the V-band data.
Correcting for these is essential when determining the effective spectral index
of the foregrounds. We find that our new foreground model is in good agreement
with template-based model presented by the WMAP team, but not with their MEM
reconstruction. We believe the latter may be at least partially compromised by
the residual offsets and dipoles in the data. Fortunately, the CMB power
spectrum is not significantly affected by these issues, as our new spectrum is
in excellent agreement with that published by the WMAP team. The corresponding
cosmological parameters are also virtually unchanged.Comment: 5 pages, 4 figures, submitted to ApJL. Background data are available
at http://www.astro.uio.no/~hke under the Research ta
A Program of Photometric Measurements of Solar Irradiance Fluctuations from Ground-based Observations
Photometric observations of the sun have been carried out at the San Fernando Observatory since early 1985. Since 1986, observations have been obtained at two wavelengths in order to separately measure the contributions of sunspots and bright facular to solar irradiance variations. Researchers believe that the contributions of sunspots can be measured to an accuracy of about plus or minus 30 ppm. The effect of faculae is much less certain, with uncertainties in the range of plus or minus 300 ppm. The larger uncertainty for faculae reflects both the greater difficulty in measuring the facular area, due to their lower contrast compared to sunspots, and the greater uncertainty in their contrast variation with viewing angle on the solar disk. Recent results from two separate photometric telescopes will be compared with bolometric observations from the active cavity radiometer irradiance monitor (ACRIM) that was on board the Solar Max satellite
Single-stage sealing of ceramic tiles by means of high power diode laser radiation
An investigation has been carried out using a 60 W high power diode laser (HPDL) to determine the feasibility of sealing the void between adjoining ceramic tiles with a specially developed grout material. A single-stage process has subsequently been devised using a new grout material which consists of two distinct components: a crushed ceramic tile mix substrate and a glazed enamel surface; the crushed ceramic tile mix provides a tough, inexpensive bulk substrate, whilst the enamel provides an impervious surface glaze. HPDL processing has resulted in crack and porosity free seals produced in normal atmospheric conditions. The single-stage grout is simple to formulate and easy to apply. Tiles were successfully sealed with power densities as low as 750 W/cm2 and at rates of up to 420 mm/min. Bonding of the enamel to the crushed ceramic tile mix was identified as being primarily due to van der Waals forces and, on a very small scale, some of the crushed ceramic tile mix material dissolving into the glaze
An experimental investigation of the aerodynamics and cooling of a horizontally-opposed air-cooled aircraft engine installation
A flight-test based research program was performed to investigate the aerodynamics and cooling of a horizontally-opposed engine installation. Specific areas investigated were the internal aerodynamics and cooling mechanics of the installation, inlet aerodynamics, and exit aerodynamics. The applicable theory and current state of the art are discussed for each area. Flight-test and ground-test techniques for the development of the cooling installation and the solution of cooling problems are presented. The results show that much of the internal aerodynamics and cooling technology developed for radial engines are applicable to horizontally opposed engines. Correlation is established between engine manufacturer's cooling design data and flight measurements of the particular installation. Also, a flight-test method for the development of cooling requirements in terms of easily measurable parameters is presented. The impact of inlet and exit design on cooling and cooling drag is shown to be of major significance
- âŠ