42 research outputs found
Quantification de l'architecture osseuse par microtomographie 3D utilisant le rayonnement synchrotron
Nous présentons un système de microtomographie 3D par rayonnement synchrotron développé à l'ESRF de Grenoble, en vue de l'analyse de la structure trabéculaire osseuse. Ce système permet d'acquérir de façon non destructive des images 3D d'échantillons osseux , ayant des voxels isotrope de 6.65 μm. Afin de caractériser la structure 3D de l'os, des paramètres quantitatifs sont extraits de ces images. Les paramètres morphologiques et topologiques utilisés en histomorphométrie, sont calculés sur les différentes coupes du volume. La variabilité des paramètres dans l'échantillon et la nécessité d'une analyse réellement tridimensionnelle sont soulignés. L'influence de la résolution spatiale sur l'exactitude des paramètres calculés est également examinée
Segmentation of cancellous bone from high-resolution computed tomography images: influence on trabecular bone measurements
International audienceThe quantification of cancellous bone network from computed tomography (CT) images requires a segmentation step which is crucial and difficult because of the partial volume effect in CT images. In this paper, we present and evaluate a new approach for segmenting cancellous bone network from high-resolution CT (HRCT) slices. The idea is first to detect a skeleton from the crest lines of the structure and then to thicken it to extract the whole bone structure by satisfying local neighborhood constraints. The segmentation requires the adjustment of relative and not absolute parameters like most methods. We quantified the influence of these parameters on architectural measurements. Results were first validated by using a physical phantom and then examined on a series of 12 HRCT images of human lumbar vertebra of different ages. We demonstrated that the choice of segmentation parameters yielded important variability on architectural measurements (up to 20%), but less variability than a more commonly used approach. This stresses the importance of settle on the segmentation parameters for once, which is possible with the proposed method
A method of Radio-Frequency inhomogeneity correction for tissue classification in brain MRI
Micro‐CT examinations of trabecular bone samples at different resolutions: 14, 7 and 2 micron level
International audienceTomographic techniques are attractive for the investigation of trabecular bone architecture. Using either conventional X‐ray sources or synchrotron sources currently allows the acquisition of 3D images in a wide range of spatial resolution that may be as small as a few micrometers. Since it is technically possible to examine trabecular architecture at different scales, a question is to know what type of information it is possible to get at each scale. For this purpose, a series of ten vertebrae samples from healthy females of different ages (33 to 90) was imaged at various resolutions on three different micro‐CT systems (cubic voxel size respectively 14, 6.7 and 1.4 \mum). The comparison of morphometric parameters extracted from the different images is in agreement with simulation results on the influence of spatial resolution on structure parameters. The conclusion is that a 14 \mum voxel size gives a reasonably good parameterisation of trabecular architecture. Besides the synchrotron radiation 2 \mum level images reveal interesting features on the irregularities and rupture of trabecular surface, and on remodeling zones
CT And Mini-CT 2D-Image Analysis for the Quantitation of Vertebral Trabecular Architecture
International audienc
European semi-anthropomorphic spine phantom for the calibration of bone densitometers: assessment of precision, stability and accuracy. The European Quantitation of Osteoporosis Study Group.
Up to now it has not been possible to reliably cross-calibrate dual-energy X-ray absorptiometry (DXA) densitometry equipment made by different manufacturers so that a measurement made on an individual subject can be expressed in the units used with a different type of machine. Manufacturers have adopted various procedures for edge detection and calibration, producing various normal ranges which are specific to each individual manufacturer's brand of machine. In this study we have used the recently described European Spine Phantom (ESP, prototype version), which contains three semi-anthropomorphic "vertebrae" of different densities made of stimulated cortical and trabecular bone, to calibrate a range of DXA densitometers and quantitative computed tomography (QCT) equipment used in the measurement of trabecular bone density of the lumbar vertebrae. Three brands of QCT equipment and three brands of DXA equipment were assessed. Repeat measurements were made to assess machine stability. With the large majority of machines which proved stable, mean values were obtained for the measured low, medium and high density vertebrae respectively. In the case of the QCT equipment these means were for the trabecular bone density, and in the case of the DXA equipment for vertebral body bone density in the posteroanterior projection. All DXA machines overestimated the projected area of the vertebral bodies by incorporating variable amounts of transverse process. In general, the QCT equipment gave measured values which were close to the specified values for trabecular density, but there were substantial differences from the specified values in the results provided by the three DXA brands. For the QCT and Norland DXA machines (posteroanterior view), the relationships between specified densities and observed densities were found to be linear, whereas for the other DXA equipment (posteroanterior view), slightly curvilinear, exponential fits were found to be necessary to fit the plots of observed versus specified densities. From these plots, individual calibration equations were derived for each machine studied. For optimal cross-calibration, it was found to be necessary to use an individual calibration equation for each machine. This study has shown that it is possible to cross-calibrate DXA as well as QCT equipment for the measurement of axial bone density. This will be of considerable benefit for large-scale epidemiological studies as well as for multi-site clinical studies depending on bone densitometry