21,226 research outputs found
Radioactive silicon as a marker in thin-film silicide formation
A new technique using radioactive 31Si (half-life =2.62 h), formed in a nuclear reactor, as a marker for studying silicide formation is described. A few hundred angstroms of radioactive silicon is first deposited onto the silicon substrate, followed immediately by the deposition of a few thousand angstroms of the metal. When the sample is heated, a silicide is first formed with the radioactive silicon. Upon further silicide formation, this band of radioactive silicide can move to the surface of the sample if silicide formation takes place by diffusion of the metal or by silicon substitutional and/or vacancy diffusion. However, if the band of radioactive silicide stays at the silicon substrate interface it can be concluded that silicon diffuses by interstitial and/or grain-boundary diffusion. This technique was tested by studying the formation of Ni2Si on silicon at 330 °C. From a combination of ion-beam sputtering, radioactivity measurement, and Rutherford backscattering it is found that the band of radioactive silicide moves to the surface of the sample during silicide formation. From these results, implanted noble-gas marker studies and the rate dependence of Ni2Si growth on grain size, it is concluded that nickel is the dominant diffusing species during Ni2Si formation, and that it moves by grain-boundary diffusion
Gravitational energy from a combination of a tetrad expression and Einstein's pseudotensor
The energy-momentum for a gravitating system can be considered by the tetard
teleparalle gauge current in orthonormal frames. Whereas the Einstein
pseudotensor used holonomic frames. Tetrad expression itself gives a better
result for gravitational energy than Einstein's. Inspired by an idea of Deser,
we found a gravitational energy expression which enjoys the positive energy
property by combining the tetrad expression and the Einstein pseudotensor,
i.e., the connection coefficient has a form appropriate to a suitable
intermediate between orthonormal and holonomic frames.Comment: 5 page
Introduction to Astrophysics and Study of Cosmic-ray Collisions and Scanning
The discovery of tremendous amounts of energy from the Atomic Explosion (ex: first Atomic Bomb on Hiroshima) was not something new. For billions of years, atoms have been splitting with the release of such energy whenever stars are shining. We know that the atomic energy is being released from the sun and stars, and that this process has been going on for unthinkable years. However, the sun\u27s atomic energy has been under control constantly, and its release of radiation (dynamic force) has supplied the constant supply of light and heat best suited for the well-being of mankind.
There are times, however, when apparently accidents can happen even in the solar laboratories; for explosions do occur on the sun that effects the earth out in a safety zone of space 19 million miles away from the sun. On such occasions, we can say that in a fairly true sense an atomic bomb has exploded on the sun. These solar explosions occur most frequently when the sun shows on its otherwise uniformly bright surface dark blotches familiarly known as sunspots
Some Useful Sources
We have provided here an annotated list of resources, key organisations and programmes that support young fathers and details of data sources for secondary use. The information complements the citations within the individual articles in this themed section
Scanning Tunneling Spectroscopic Studies of the Effects of Dielectrics and Metallic Substrates on the Local Electronic Characteristics of Graphene
Atomically resolved imaging and spectroscopic characteristics of
graphene grown by chemical vapor deposition (CVD) on copper
foils are investigated and compared with those of mechanical
exfoliated graphene on SiO_2. For exfoliated graphene, the local
spectral deviations from ideal behavior may be attributed to strain
induced by the SiO_2 substrate. For CVD grown graphene, the
lattice structure appears strongly distorted by the underlying
copper, with regions in direct contact with copper showing nearly
square lattices whereas suspended regions from thermal relaxation
exhibiting nearly honeycomb or hexagonal lattice structures. The
electronic density of states (DOS) correlates closely with the
atomic arrangements of carbon, showing excess zero-bias
tunneling conductance and nearly energy-independent DOS for
strongly distorted graphene, in contrast to the linearly dispersive
DOS for suspended graphene. These results suggest that graphene
can interact strongly with both metallic and dielectric materials in
close proximity, leading to non-negligible modifications to the
electronic properties
Novel Precursors for Boron Nanotubes: The Competition of Two-Center and Three-Center Bonding in Boron Sheets
We present a new class of boron sheets, composed of triangular and hexagonal
motifs, that are more stable than structures considered to date and thus are
likely to be the precursors of boron nanotubes. We describe a simple and clear
picture of electronic bonding in boron sheets and highlight the importance of
three-center bonding and its competition with two-center bonding, which can
also explain the stability of recently discovered boron fullerenes. Our
findings call for reconsideration of the literature on boron sheets, nanotubes,
and clusters.Comment: 4 pages, 4 figures, 1 tabl
Clinical measurements versus patient-reported outcomes: analysis of the American Shoulder and Elbow Surgeons physician assessment in patients undergoing reverse total shoulder arthroplasty.
BackgroundThe American Shoulder and Elbow Surgeons (ASES) score is composed of a patient-reported portion and a physician assessment. Although the patient-reported score is frequently used to assess postoperative outcomes after shoulder arthroplasty, no previous studies have used the physician-assessment component. This study evaluated the relationship of the ASES physician-assessment measurements with patient-reported shoulder and general health outcomes.MethodsA retrospective review of a prospectively collected multicenter database was used to analyze patients who underwent primary reverse total shoulder arthroplasty (RTSA) from 2012 to 2015 with a minimum 2-year follow-up. ASES physician-assessment and patient-reported components and 12-Item Short Form Health Survey (SF-12) general health questionnaires were obtained preoperatively and 2 years postoperatively. The relationship between ASES physician measurements with ASES patient-reported outcome (PRO) scores and SF-12 Physical and Mental domain scores was assessed with Pearson correlation coefficients.ResultsIncluded were 74 patients (32 men; mean age, 69.2 years; body mass index, 29.4 kg/m2). Preoperative physician measurements and PRO scores were not significantly correlated. Postoperatively, only the ASES physician-measured active (R = 0.54, P < .01) and passive forward flexion (R = 0.53, P < .01) demonstrated moderate correlation with ASES patient scores. The remaining clinical measurements had no significant correlations with ASES patient or SF-12 scores. During the 2-year period, only improvements in active forward flexion correlated with improvements in ASES patient scores (R = 0.36, P < .01).ConclusionsLittle correlation exists between clinical measurements from the ASES physician component and PROs, including the ASES patient-reported and SF-12 general health surveys, in RTSA patients. Improvement in active forward flexion is the only clinical measurement correlated with PRO improvement at 2 years
An Infrared Study of the Circumstellar Material Associated with the Carbon Star R Sculptoris
The asymptotic giant branch (AGB) star R Sculptoris (R Scl) is one of the
most extensively studied stars on the AGB. R Scl is a carbon star with a
massive circumstellar shell () which
is thought to have been produced during a thermal pulse event years
ago. To study the thermal dust emission associated with its circumstellar
material, observations were taken with the Faint Object InfraRed CAMera for the
SOFIA Telescope (FORCAST) at 19.7, 25.2, 31.5, 34.8, and 37.1 m. Maps of
the infrared emission at these wavelengths were used to study the morphology
and temperature structure of the spatially extended dust emission. Using the
radiative transfer code DUSTY and fitting the spatial profile of the emission,
we find that a geometrically thin dust shell cannot reproduce the observed
spatially resolved emission. Instead, a second dust component in addition to
the shell is needed to reproduce the observed emission. This component, which
lies interior to the dust shell, traces the circumstellar envelope of R Scl. It
is best fit by a density profile with where
and dust mass of
. The strong departure from an
law indicates that the mass-loss rate of R Scl has not been constant.
This result is consistent with a slow decline in the post-pulse mass-loss which
has been inferred from observations of the molecular gas.Comment: 10 pages, 10 figures, accepted to Ap
- …