Wafer-scale two-dimensional semiconductors from printed oxide skin of liquid metals

© The Author(s) 2017. A variety of deposition methods for two-dimensional crystals have been demonstrated; however, their wafer-scale deposition remains a challenge. Here we introduce a technique for depositing and patterning of wafer-scale two-dimensional metal chalcogenide compounds by transforming the native interfacial metal oxide layer of low melting point metal precursors (group III and IV) in liquid form. In an oxygen-containing atmosphere, these metals establish an atomically thin oxide layer in a self-limiting reaction. The layer increases the wettability of the liquid metal placed on oxygen-terminated substrates, leaving the thin oxide layer behind. In the case of liquid gallium, the oxide skin attaches exclusively to a substrate and is then sulfurized via a relatively low temperature process. By controlling the surface chemistry of the substrate, we produce large area two-dimensional semiconducting GaS of unit cell thickness (∼1.5 nm). The presented deposition and patterning method offers great commercial potential for wafer-scale processes

Design, Analysis and Testing of a Novel Mitral Valve for Transcatheter Implantation

Mitral regurgitation is a common mitral valve dysfunction which may lead to heart failure. Because of the rapid aging of the population, conventional surgical repair and replacement of the pathological valve are often unsuitable for about half of symptomatic patients, who are judged high-risk. Transcatheter valve implantation could represent an effective solution. However, currently available aortic valve devices are inapt for the mitral position. This paper presents the design, development and hydrodynamic assessment of a novel bi-leaflet mitral valve suitable for transcatheter implantation. The device consists of two leaflets and a sealing component made from bovine pericardium, supported by a self-expanding wireframe made from superelastic NiTi alloy. A parametric design procedure based on numerical simulations was implemented to identify design parameters providing acceptable stress levels and maximum coaptation area for the leaflets. The wireframe was designed to host the leaflets and was optimised numerically to minimise the stresses for crimping in an 8 mm sheath for percutaneous delivery. Prototypes were built and their hydrodynamic performances were tested on a cardiac pulse duplicator, in compliance with the ISO5840-3:2013 standard. The numerical results and hydrodynamic tests show the feasibility of the device to be adopted as a transcatheter valve implant for treating mitral regurgitation

The microstructure and properties of energetically deposited carbon nitride films

The intrinsic stress, film density and nitrogen content of carbon nitride (CNx) films deposited from a filtered cathodic vacuum arc were determined as a function of substrate bias, substrate temperature and nitrogen process pressure. Contour plots of the measurements show the deposition conditions required to produce the main structural forms of CNx including N-doped tetrahedral amorphous carbon (ta-C:N) and a variety of nitrogen containing graphitic carbons. The film with maximum nitrogen content (~ 30%) was deposited at room temperature with 1.0 mTorr N2 pressure and using an intermediate bias of - 400 V. Higher nitrogen pressure, higher bias and/or higher temperature promoted layering with substitutional nitrogen bonded into graphite-like sheets. As the deposition temperature exceeded 500 °C, the nitrogen content diminished regardless of nitrogen pressure, showing the meta-stability of the carbon-nitrogen bonding in the films. Hardness and ductility measurements revealed a diverse range of mechanical properties in the films, varying from hard ta-C:N (~ 50 GPa) to softer and highly ductile CN x which contained tangled graphite-like sheets. Through-film current-voltage characteristics showed that the conductance of the carbon nitride films increased with nitrogen content and substrate bias, consistent with the transition to more graphite-like films

Visible to near-IR fluorescence from single-digit detonation nanodiamonds: excitation wavelength and pH dependence

Detonation nanodiamonds are of vital significance to many areas of science and technology. However, their fluorescence properties have rarely been explored for applications and remain poorly understood. We demonstrate significant fluorescence from the visible to near-infrared spectral regions from deaggregated, single-digit detonation nanodiamonds dispersed in water produced via post-synthesis oxidation. The excitation wavelength dependence of this fluorescence is analyzed in the spectral region from 400 nm to 700 nm as well as the particles' absorption characteristics. We report a strong pH dependence of the fluorescence and compare our results to the pH dependent fluorescence of aromatic hydrocarbons. Our results significantly contribute to the current understanding of the fluorescence of carbon-based nanomaterials in general and detonation nanodiamonds in particular

Seasonal characteristics and regional transport of PM2.5 in Hong Kong

The Asiatic monsoon is the dominant meteorological feature of the Pearl River Delta (PRD) region in China, and influences the accumulation of locally emitted pollutants, as well as regional transport. To investigate the effect of meteorological characteristics on PM2.5 mass and chemical composition in Hong Kong, a major city of the PRD, 24-h (0000-2400LST) PM2.5 samples were collected every sixth day from 6 November 2000 to 26 October 2001. The sampling network included a roadside site at Mong Kok (MK), an urban site at Tsuen Wan (TW), and a rural site at Hok Tsui (HT). Air parcel back trajectory and residence time analyses indicate a predominantly northeasterly transport durine winter and fall in contrast to a southwesterly-to-southeasterly transport in summer. The highest seasonal PM2.5 concentrations were found in winter, followed by fall, at each of the sampling sites due to elevated organic material (OM) and ammonium nitrate (NH4NO3), consistent with the increased air parcel residence time over potential source regions. Though local mobile sources appeared to dominate the emission of carbonaceous material, a higher organic carbon/elemental carbon (OC/EC) ratio and water-soluble potassium (K+) concentration in winter imply an additional contribution from vegetative burning. Episodic pollution events were identified and investigated with back trajectories and species enrichment factors. Local and regional sources both contributed to the formation of a pollution episode on 28 February 2001. These findings reflect the degree Of PM2.5 pollution in Hong Kong and provide valuable insights for planning future monitoring and modeling studies in the PRD region. (c) 2005 Elsevier Ltd. All rights reserved

Multifunctional three-dimensional nanodiamond-nanoporous alumina nanoarchitectures

Hybrid composite nanomaterials provide an attractive and versatile material platform for numerous emerging nano- and biomedical applications by offering the possibility to combine diverse properties which are impossible to obtain within a single material. In this work, we present the fabrication of novel hybrid diamond and amorphous diamond-like carbon (DLC) coated nanoporous alumina materials that exhibit multiple functionalities, such as high surface area, quasi-ordered nanopore structure, tunable surface chemistry and electrical conductivity, excellent biological, chemical and corrosion resistance. These multifunctional nanohybrid materials are fabricated using the plasma-induced carbonization method that effectively modifies the surface and the inside of the nanopores of anodic alumina, producing a homogenous ultrathin DLC protecting layer over the whole external and internal surfaces of the membranes. We demonstrate that the interplay between internal and external carbon supply is a critical factor for the formation of the ultrathin sp3-bonded carbon layer in the nanopores. This study brings new insights in the DLC growth mechanisms in confined nanospaces and opens new avenues to fabricate hybrid, chemically resistant and biocompatible carbon-coated nanoarchitectures on other inorganic supports. © 2014 Elsevier Ltd. All rights reserved

Nucleation and chemical vapor deposition growth of polycrystalline diamond on aluminum nitride: Role of surface termination and polarity

We have investigated the growth and atomic interface structures of diamond on aluminum nitride (AlN). The two-step chemical vapor deposition technique is used to control diamond nucleation density, crystal size, and AlN surface orientation and polarity. Highly uniform diamond layers with a nucleation density in the range of 105-1011 cm-2 and a grain size of 0.1-5 μm are fabricated. Crystallographically abrupt interfaces between polycrystalline diamond and single-crystal AlN(0001) layers have been observed via high-resolution transmission electron microscopy and electron energy-loss spectroscopy. A majority of the diamond crystals have been found to have the diamond(111)/AlN(0001) interface relationship. Atomistic models of the bonding mechanism at the heterointerface are used to elucidate experimental observations and the role of hydrogen plasma on the growth of diamond on AlN. Nonpolar and semipolar AlN surfaces have been found to have higher resistance to process plasma and led to better crystallinity of the diamond/AlN heterointerfaces. These results underline the potential of nonpolar and semipolar AlN surfaces for the growth of high-crystal quality diamond/AlN heterointerfaces. © 2013 American Chemical Society