89 research outputs found
Distinguishability Analysis for Multiple Mass Models of Servo Systems with Commissioning Sensors
Physically motivated models of electromechanical
motion systems enable model-based control theory and facilitate
system interpretation. Unfortunately, the effort of modelling
restricts the usage of model-based methods in many applications.
Some approaches to automatically generate models from
measurements choose the best model based on minimizing the
residual. These model selection attempts are limited due to
ambiguities in reconstructing the internal structure from the
input-output behaviour because usually motion systems have
only one actuator and one sensor. Often, it is unknown if the
resulting model is unique or if other models with different
structure would fit equally well. The set of candidate models
should be designed to contain only distinguishable models but
ambiguities are often unknown to the experimenter. In this
paper distinguishability is investigated systematically for a class
of multiple mass models representing servo positioning systems.
In the analysis a new criterion for indistinguishability is used.
The benefit of additional, structural sensors on distinguishability
of models is demonstrated which suggests to mount them
temporarily for the commissioning phase in order to facilitate
the model selection. It turns out that the best results can be
achieved if synergies among sensor signals are utilized.
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including
reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works
Model Selection for Servo Control Systems
Physically motivated models of electromechanical motion systems are required in several applications related to control design. However, the effort of modelling is high and automatic modelling would be appealing. The intuitive approach to select the model with the best fit has the shortcoming that the chosen model may be one with high complexity in which some of the parameters are not identiifable or uncertain. Also, ambiguities in selecting the model structure would lead to false conclusions. This paper proposes a strategy for frequency domain model selection ensuring practical identifiability. Also, the paper describes distinguishability analysis of candidate models utilising transfer function coecients and Markov parameters. Model selection and distinguishability analysis are applied to a class of models as they are commonly used to describe servo control systems. It is shown in experiments on an industrial stacker crane that model selection works with little user interaction, except from defining normalised hyperparameters
Frequency Domain Model Selection for Servo Systems ensuring Practical Identifiability
Physically motivated models of servo control systems with coupled mechanics are required for control design, simulation etc. Often, however, the effort of modelling prohibits, these model-based methods in industrial applications. Therefore,
all approaches of automatic modelling / model selection are naturally appealing. In this paper a procedure for model selection in frequency domain is proposed that minimizes the Kullback-Leibler distance between model and measurement while considering only those models that are practically identifiable. It aims at mechanical models of servo systems including multiplemass resonators. Criteria for practical identifiability are derived locally from the sensitivity matrix which is calculated for different formulations of the equation error. In experiments with two industry-like testbeds the methodology proves to reveal the characteristic mechanical properties of the two setups. © 2020 IEE
Multisensor-Configuration for Improved Identifiability and Observability of Electromechanical Motion Systems
For many problems in the field of control design phenomenological models are required so that the need for parameter identification of given model structures arises. These models can be combined with observers to derive the system states in operation in addition to the parameters. However, identification and observation are limited in accuracy due to the restriction to existing series sensors. In the case of electric drives it is possible that due to elasticities in the structure part of the system is vibrating while the position sensor measures a nearly constant position. In this paper, the use of additional acceleration sensors is investigated in terms of identifiability and observability, which are installed at different points of the structure. The analysis is traced back to measures on the sensitivity matrix, where the integrating behaviour of the plant and the combination of different sensor types (position, velocity, acceleration) require special consideration. An industry-like stacker crane is used as a testbed for validation. It is shown that both identifiability and observability can be improved by the additional sensors in many cases. There is a good agreement between the expected and measured frequency response when the acceleration sensor is mounted on the first or second mass. Deviations only occur when mounted on the load suspension device, which is assumed to be the third mass. © 2020 IEE
Structure and Parameter Identification of Process Models with hard Non-linearities for Industrial Drive Trains by means of Degenerate Genetic Programming
The derivation of bright-grey box models for electric drives with coupled mechanics, such as stacker cranes, robots and linear gantries is an important step in control design but often too time-consuming for the ordinary commissioning process. It requires structure and parameter identification in repeated trial and error loops. In this paper an automated genetic programming solution is proposed that can cope with various features, including highly non-linear mechanics (friction, backlash). The generated state space representation can readily be used for stability analysis, state control, Kalman filtering, etc. This, however, requires several special rules in the genetic programming procedure and an automated integration of features into the defining state space form. Simulations are carried out with industrial data to investigate the performance and robustness
Model Selection ensuring Practical Identifiability for Models of Electric Drives with Coupled Mechanics
Physically motivated models of electric drive trains with coupled mechanics are
ubiquitous in industry for control design, simulation, feed-forward, model-based fault diagnosis etc. Often, however, the effort of model building prohibits these model-based methods. In this paper an automated model selection strategy is proposed for dynamic simulation models that not only optimizes the accuracy of the fit but also ensures practical identifiability of model parameters during structural optimization. Practical identifiability is crucial for physically motivated, interpretable models as opposed to pure prediction and inference applications. Our approach extends structural optimization considering practical identifiability to nonlinear models. In spite of the nonlinearity, local and linear criteria are evaluated, the integrity of which is investigated exemplarily. The methods are validated experimentally on a stacker crane
Machine learning methods for automated classification of tumors with papillary thyroid carcinoma-like nuclei : A quantitative analysis
When approaching thyroid gland tumor classification, the differentiation between samples with and without “papillary thyroid carcinoma-like” nuclei is a daunting task with high inter-observer variability among pathologists. Thus, there is increasing interest in the use of machine learning approaches to provide pathologists real-time decision support. In this paper, we optimize and quantitatively compare two automated machine learning methods for thyroid gland tumor classification on two datasets to assist pathologists in decision-making regarding these methods and their parameters. The first method is a feature-based classification originating from common image processing and consists of cell nucleus segmentation, feature extraction, and subsequent thyroid gland tumor classification utilizing different classifiers. The second method is a deep learning-based classification which directly classifies the input images with a convolutional neural network without the need for cell nucleus segmentation. On the Tharun and Thompson dataset, the feature-based classification achieves an accuracy of 89.7% (Cohen’s Kappa 0.79), compared to the deep learning-based classification of 89.1% (Cohen’s Kappa 0.78). On the Nikiforov dataset, the feature-based classification achieves an accuracy of 83.5% (Cohen’s Kappa 0.46) compared to the deep learning-based classification 77.4% (Cohen’s Kappa 0.35). Thus, both automated thyroid tumor classification methods can reach the classification level of an expert pathologist. To our knowledge, this is the first study comparing feature-based and deep learning-based classification regarding their ability to classify samples with and without papillary thyroid carcinoma-like nuclei on two large-scale datasets
Associations of Plasma Nitrite, L-Arginine and Asymmetric Dimethylarginine With Morbidity and Mortality in Patients With Necrotizing Soft Tissue Infections
Simplified Mortality Score for the Intensive Care Unit (SMS-ICU):protocol for the development and validation of a bedside clinical prediction rule
INTRODUCTION: Mortality prediction scores are widely used in intensive care units (ICUs) and in research, but their predictive value deteriorates as scores age. Existing mortality prediction scores are imprecise and complex, which increases the risk of missing data and decreases the applicability bedside in daily clinical practice. We propose the development and validation of a new, simple and updated clinical prediction rule: the Simplified Mortality Score for use in the Intensive Care Unit (SMS-ICU). METHODS AND ANALYSIS: During the first phase of the study, we will develop and internally validate a clinical prediction rule that predicts 90-day mortality on ICU admission. The development sample will comprise 4247 adult critically ill patients acutely admitted to the ICU, enrolled in 5 contemporary high-quality ICU studies/trials. The score will be developed using binary logistic regression analysis with backward stepwise elimination of candidate variables, and subsequently be converted into a point-based clinical prediction rule. The general performance, discrimination and calibration of the score will be evaluated, and the score will be internally validated using bootstrapping. During the second phase of the study, the score will be externally validated in a fully independent sample consisting of 3350 patients included in the ongoing Stress Ulcer Prophylaxis in the Intensive Care Unit trial. We will compare the performance of the SMS-ICU to that of existing scores. ETHICS AND DISSEMINATION: We will use data from patients enrolled in studies/trials already approved by the relevant ethical committees and this study requires no further permissions. The results will be reported in accordance with the Transparent Reporting of multivariate prediction models for Individual Prognosis Or Diagnosis (TRIPOD) statement, and submitted to a peer-reviewed journal
Benefit of extra sensors for distinguishability of models of electric power trains in structure und parameter identification
FĂĽr viele Fragestellungen aus Reglerauslegung, Vorsteuerung und ZustandsĂĽberwachung werden Prozessmodelle mit korrekter
und physikalisch interpretierbarer innerer Struktur benötigt (phenomenologische Modelle). Die modellbasierten
Ansätze werden in der Industrie vielfach noch nicht angewandt, weil die Modellerstellung ein hohes Maß an Expertenwissen
und die langwierige Programmierung von Experimenten erfordert. Eine automatischen Struktur- und Parameteridentifikation
ist dadurch bebrenzt, dass anhand des Ein-/Ausgangsverhaltens häufig die Unterscheidbarkeit von Modellen
nicht gegeben ist. In dieser Veröffentlichung liegt der Fokus auf industriellen Anlagen mit elektrischem Antriebsstrang
und einfacher Kinematik wie Regalbediengeräten, Werkzeugmaschinen und Positionierantrieben. Diese Systeme haben
häufig nur einen Positions- und einen Stromsensor. Es wird in Experimenten gezeigt, dass durch Hinzunahme von einfach
zu installierenden Zusatzsensoren wie Beschleunigungssensoren oder Drehratensensoren in einigen Fällen eine eindeutige
Strukturidentifikation ermöglicht wird, auch wenn nur wenig Vorwissen über den Sensorort vorliegt
- …