Low-Velocity Impacts on a Polymeric Foam for the Passive Safety Improvement of Sports Fields: Meshless Approach and Experimental Validation

Over the past few years, foam materials have been increasingly used in the passive safety of sport fields, to mitigate the risk of crash injury. Currently, the passive safety certification process of these materials represents an expensive and time-consuming task, since a considerable number of impact tests on material samples have to be carried out by an ad hoc testing apparatus. To overcome this difficulty and speed up the design process of new protective devices, a virtual model for the low-velocity impact behaviour of foam protective mats is needed. In this study a modelling approach based on the mesh-free Element Galerkin method was developed to investigate the impact behaviour of ethylene-vinyl acetate (EVA) foam protective mats. The main advantage of this novel technique is that the difficulties related to the computational mesh distortion and caused by the large deformation of the foam material are avoided and a good accuracy is achieved at a relatively low computational cost. The numerical model was validated statistically by comparing numerical and experimental acceleration data acquired during a series of impact events on EVA foam mats of various thicknesses. The findings of this study are useful for the design and improvement of foam protective devices and allow for optimizing sports fields’ facilities by reducing head injury risk by a reliable computational method

Biomechanical analysis of the upper body during overhead industrial tasks using electromyography and motion capture integrated with digital human models

In this paper, we present a biomechanical analysis of the upper body, which includes upper-limb, neck and trunk, during the execution of overhead industrial tasks. The analysis is based on multiple performance metrics obtained from a biomechanical analysis of the worker during the execution of a specific task, i.e. an overhead drilling task, performed at different working heights. The analysis enables a full description of human movement and internal load state during the execution of the task, thought the evaluation of joint angles, joint torques and muscle activations. A digital human model is used to simulate and replicate the worker’s task in a virtual environment. The experiments were conduced in laboratory setting, where four subjects, with different anthropometric characteristics, have performed 48 drilling tasks in two different working heights defined as low configuration and middle configuration. The results of analysis have impact on providing the best configuration of the worker within the industrial workplace and/or providing guidelines for developing assistance devices which can reduce the physical overloading acting on the worker’s body

The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA

3D tooth models were virtually restored: flowable composite resin + bulk-fill composite (A), glass ionomer cement + bulk-fill composite (B) or adhesive + bulk-fill composite (C). Polymerization shrinkage and masticatory loads were simulated. All models exhibited the highest stress concentration at the enamel-restoration interfaces. A and C showed similar pattern with lower magnitude in A in comparison to C. B showed lower stress in dentine and C the highest cusps displacement. The use of glass ionomer cement or flowable composite resin in combination with a bulk-fill composite improved the biomechanical behavior of deep class II MO cavities

The use of different adhesive filling material and mass combinations to restore class II cavities under loading and shrinkage effects: a 3D-FEA

3D tooth models were virtually restored: flowable composite resin + bulk-fill composite (A), glass ionomer cement + bulk-fill composite (B) or adhesive + bulk-fill composite (C). Polymerization shrinkage and masticatory loads were simulated. All models exhibited the highest stress concentration at the enamel–restoration interfaces. A and C showed similar pattern with lower magnitude in A in comparison to C. B showed lower stress in dentine and C the highest cusps displacement. The use of glass ionomer cement or flowable composite resin in combination with a bulk-fill composite improved the biomechanical behavior of deep class II MO cavities

Jatrophane diterpenes as modulators of multidrug resistance. Advances of structure-activity relationships and discovery of the potent lead pepluanin A

From the whole plant of Euphorbia peplus L., five new diterpenes based on a jatrophane skeleton (pepluanins A-E, 1-5) were isolated, together with two known analogues (6 and 7), which served to divulge in detail the structure-activity relationships within this class of P-glycoprotein inhibitors. The results revealed the importance of substitutions on the medium-sized ring (carbons 8, 9, 14, and 15). In particular, the activity is collapsed by the presence of a free hydroxyl at C-8, while it increases with a carbonyl at C-14, an acetoxyl at C-9, and a free hydroxyl at C-15. The most potent compound of the series, pepluanin A, showed a very high activity for a jatrophane diterpene, outperforming cyclosporin A by a factor of at least 2 in the inhibition of Pgp-mediated daunomycin transport

A preliminary approach for swimming performance analysis of FISDIR elite athletes with intellectual impairment using an inertial sensor

People with intellectual impairment show low performances in motor control, especially in complex movements. Performance analysis methods, based on wearable inertial sensor, are often used in typical developed swimmers but have never been used in swimmers with intellectual impairment, for whom the use of quantitative systems would be even more important. This paper presents a case study conducted on freestyle swimmers from the functional evaluation project of the Italian Sport Federation for athletes with Intellectual Impairment (FISDIR). The tests were conducted by five Italian elite swimmers with intellectual impairment using a structured experimental protocol which foresees an inertial sensor located on the wrist. Key freestyle temporal and kinematic parameters were assessed. A high-speed camera was used as a benchmark to validate the inertial-based parameters. The preliminary results indicate that the proposed inertial-based approach correlates over 90% with the performance indices obtained with the camera-based approach, and therefore it could represent a useful tool for monitoring and improving the training

Acute toxicity, brine shrimp cytotoxicity and relaxant activity of fruits of callistemon citrinus curtis

<p>Abstract</p> <p>Background</p> <p><it>Callistemon citrinus </it>Curtis belongs to family Myrtaceae that has a great medicinal importance. In our previous work, fruits of <it>Callistemon citrinus </it>were reported to have relaxant (antispasmodic) activity. The current work describes the screening of fractions of the crude methanol extract for tracing spasmolytic constituents so that it shall help us for isolation of bioactive compounds. Acute toxicity and brine shrimp cytotoxicity of crude methanol extract are also performed to standardize it.</p> <p>Methods</p> <p>The crude methanol extract was obtained by maceration with distilled water (500 ml) three times and fractionated successively with <it>n-</it>hexane, chloroform, ethyl acetate and <it>n-</it>butanol (300 ml of each solvent). Phytochemical analysis for crude methanol extract was performed. Acute toxicity studies were performed in mice. Brine shrimp cytotoxicity studies were performed to determine its cytotoxicity and standardize it. In other series of experiments, rabbits' jejunum preparations were used in screening for possible relaxant activities of various fractions. They were applied in concentrations of 0.01, 0.03, 0.1, 0.3, 1.0, 3.0, 5.0 and 10.0 mg/ml on spontaneous rabbits' jejunum preparations. In similar fashion, fractions were also tested on KCl (80 mM) -induced contractions. Calcium chloride curves were constructed in K-rich Tyrode's solution. The effects of various fractions were tested on calcium chloride curves at concentrations 1.0, 3.0, 5.0 and 10.0 mg/ml. Curves of verapamil used as reference drug at concentration 0.1 μM and 0.3 μM were also constructed. The curves were compared with their respective controls for possible right shift.</p> <p>Results</p> <p>Methanol extract tested strongly positive for saponins and tannins. However, it tested mild positive for presence of proteins, amino acids, carbohydrates and phenolic compounds. LD₅₀value for crude methanol extract is 476.25 ± 10.3 (470-481, n = 4) mg/ml. Similarly, EC₅₀value for brine shrimp cytotoxicity is 65.5 ± 7.28 (60.8- 69.4, n = 4) mg/ml. All the fractions relaxed the spontaneous and KCl-induced contractions. EC₅₀values (mg/ml) for effects of ethyl acetate fraction on spontaneous and KCl induced contractions are 2.62 ± 0.78 (2.15-3.0, n = 4) and 3.72 ± 0.86 (3.38-4.28, n = 4) respectively. Respective EC₅₀values (mg/ml) for <it>n-</it>butanol fraction are 3.59 ± 0.2(3.07-3.9, n = 4) for spontaneous, and 5.57 ± 0.2 (5.07-6.11, n = 4) for KCl- induced contractions. EC₅₀value for control calcium chloride curve (without extract) is -2.73 ± 0.19 (-2.6 - -2.81, n = 4) while EC₅₀for curves treated with 5.0 mg/ml of chloroform is -2.22 ± 0.02 (-2.16 - -2.3, n = 4). EC₅₀value for ethyl acetate treated (1.0 mg/ml) tissues is -1.95 ± 0.10 (-1.88 - -2.0, n = 4) <it>vs</it>. control EC₅₀= -2.71 ± 0.08 (-2.66 - -2.76, n = 4). All the fractions, except <it>n-</it>hexane, showed a right shift like that of verapamil (EC₅₀= -1.72 ± 0.15 (-1.62 - -1.8, n = 4) vs. Control EC₅₀= -2.41 ± 0.06 (-2.38 - - 2.44, n = 4), a standard drug that blocks voltage operated calcium channels.</p> <p>Conclusion</p> <p>Relaxant constituents were more concentrated in ethylacetate fraction followed by chloroform, <it>n -</it>butanol and aqueous fractions that warrant for its isolation. The crude methanol extract is safe at concentration 250 mg/ml or below and results of brine shrimp cytotoxicity assay imply the plant specie may be a source of cytotoxic agents.</p

Ent cobra ontology: the covariates classification system proposed by the Head & Neck and Skin GEC-ESTRO Working Group for interdisciplinary standardized data collection in head and neck patient cohorts treated with interventional radiotherapy (brachytherapy)

Purpose: Clinical data collecting is expensive in terms of time and human resources. Data can be collected in different ways; therefore, performing multicentric research based on previously stored data is often difficult. The primary objective of the ENT COBRA (COnsortium for BRachytherapy data Analysis) ontology is to define a specific terminological system to standardized data collection for head and neck (H&amp;N) cancer patients treated with interventional radiotherapy. Material and methods: ENT-COBRA is a consortium for standardized data collection for H&amp;N patients treated with interventional radiotherapy. It is linked to H&amp;N and Skin GEC-ESTRO Working Group and includes 11 centers from 6 countries. Its ontology was firstly defined by a multicentric working group, then evaluated by the consortium followed by a multi-professional technical commission involving a mathematician, an engineer, a physician with experience in data storage, a programmer, and a software expert. Results: Two hundred and forty variables were defined on 13 input forms. There are 3 levels, each offering a specific type of analysis: 1. Registry level (epidemiology analysis); 2. Procedures level (standard oncology analysis); 3. Research level (radiomics analysis). The ontology was approved by the consortium and technical commission; an ad-hoc software architecture (\u201cbroker\u201d) remaps the data present in already existing storage systems of the various centers according to the shared terminology system. The first data sharing was successfully performed using COBRA software and the ENT COBRA Ontology, automatically collecting data directly from 3 different hospital databases (L\ufcbeck, Navarra, and Rome) in November 2017. Conclusions: The COBRA Ontology is a good response to the multi-dimensional criticalities of data collection, retrieval, and usability. It allows to create a software for large multicentric databases with implementation of specific remapping functions wherever necessary. This approach is well-received by all involved parties, primarily because it does not change a single center\u2019s storing technologies, procedures, and habits