3,563 research outputs found
Shortened horn-reflector antenna
A shortened horn-reflector antenna overcomes the mechanical disadvantages and complexity of the conventional horn-reflector antenna. The shortened antenna offers broadband performance, economic construction, very low antenna temperature, and excellent pattern performance
Investigation of the applicability of using the triple redundant hydrogen sensor for methane sensing
Application specifications for the methane sensor were assembled and design guidelines, development goals and evaluation criteria were formulated. This was done to provide a framework to evaluate sensor performance and any design adjustments to the preprototype sensor that could be required to provide methane sensitivity. Good response to hydrogen was experimentally established for four hydrogen sensor elements to be later evaluated for methane response. Prior results were assembled and analyzed for other prototype hydrogen sensor performance parameters to form a comparison base. The four sensor elements previously shown to have good hydrogen response were experimentally evaluated for methane response in 2.5% methane-in-air. No response was obtained for any of the elements, despite the high methane concentration used (50% of the Lower Flammability Limit). It was concluded that the preprototype sensing elements were insensitive to methane and were hydrogen specific. Alternative sensor operating conditions and hardware design changes were considered to provide methane sensitivity to the preprototype sensor, including a variety of different methane sensing techniques. Minor changes to the existing sensor elements, sensor geometry and operating conditions will not make the preprototype hydrogen sensor respond to methane. New sensor elements that will provide methane and hydrogen sensitivity require replacement of the existing thermistor type elements. Some hydrogen sensing characteristics of the modified sensor will be compromised (larger in situ calibration gas volume and H2 nonspecificity). The preprototype hydrogen sensor should be retained for hydrogen monitoring and a separate methane sensor should be developed
Production Structure, Technological Change and Scale Economies in the Saw and Planing Mills Industry in New Brunswick, Canada
The translog cost function approach is employed to characterize the production structure and to estimate the rate of technical change and technical bias in the saw and planing mills industry (SPM) in the New Brunswick Province. The findings are that the production structure of the saw and planing mills in Canada is neither homothetic nor homogenous implying potential scale induced distortion in the input mix. Morishma elasticity of substitution estimates show that in the existing technology of the saw and planing mills in New Brunswick, labor can more easily be substituted by capital than capital by labor. Moreover, the amount of round wood that is required to complement labor is higher than that required to complement energy and capital, which indicates that a labor intensive technology choice in the SPM industry is more round wood consuming than the capital and energy intensive technologies. These results coupled with the increasingly stringent environmental regulations indicate that the relative use of labor compared to other inputs is likely to decline in the saw and planing mills industry. Hence, in view of their cost minimizing behavior, the saw and planing mills in New Brunswick will sooner or latter start to replace labor with energy or capital. The saw and planing mills in New Brunswick exhibited fairly high economies of scale during the period 1965-1995, but the rate of technical change has been found to be negative.Resource /Energy Economics and Policy,
Aqueous alteration on main belt primitive asteroids: results from visible spectroscopy
This work focuses on the study of the aqueous alteration process which acted
in the main belt and produced hydrated minerals on the altered asteroids. The
aqueous alteration is particularly important for unraveling the processes
occurring during the earliest times of the Solar System history, as it can give
information both on the asteroids thermal evolution and on the localization of
water sources in the asteroid belt. We present new spectral observations in the
visible region of 80 asteroids belonging to the primitive classes C, G, F, B
and P. We combine the present observations with the visible spectra of
asteroids available in the literature for a total of 600 primitive main belt
asteroids. Our analysis shows that the aqueous alteration sequence starts from
the P-type objects, practically unaltered, and increases through the F, B, C,
and G asteroids. Around 50% of the observed C-type asteroids show absorption
features in the vis. range due to hydrated silicates, implying that more than
70% of them will have a 3 m absorption band and thus hydrated minerals on
their surfaces. The process dominates in primitive asteroids located between
2.3 and 3.1 AU, that is at smaller heliocentric distances than previously
suggested. The aqueous alteration process dominates in the 50--240 km sized
primitive asteroids, while it is less effective for bodies smaller than 50 km.
No correlation is found between the aqueous alteration process and the
asteroids albedo or orbital elements. Comparing the 0.7 m band
parameters of hydrated silicates and CM2 carbonaceous chondrites, we see that
the band center of meteorites is at longer wavelengths than that of asteroids.
This difference on center positions may be attributed to different minerals
abundances, and to the fact that CM2 available on Earth might not be
representative of the whole aqueous altered asteroids population.Comment: Icarus, accepted for publication on 28 January 2014 Manuscript pages:
38; Figures: 13 ; Tables:
Andreev Level Qubit
We investigate the dynamics of a two-level Andreev bound state system in a
transmissive quantum point contact embedded in an rf-SQUID. Coherent coupling
of the Andreev levels to the circulating supercurrent allows manipulation and
read out of the level states. The two-level Hamiltonian for the Andreev levels
is derived, and the effect of interaction with the quantum fluctuations of the
induced flux is studied. We also consider an inductive coupling of qubits, and
discuss the relevant SQUID parameters for qubit operation and read out.Comment: 4 pages, 1 figur
NiO Exchange Bias Layers Grown by Direct Ion Beam Sputtering of a Nickel Oxide Target
A new process for fabricating NiO exchange bias layers has been developed.
The process involves the direct ion beam sputtering (IBS) of a NiO target. The
process is simpler than other deposition techniques for producing NiO buffer
layers, and facilitates the deposition of an entire spin-valve layered
structure using IBS without breaking vacuum. The layer thickness and
temperature dependence of the exchange field for NiO/NiFe films produced using
IBS are presented and are similar to those reported for similar films deposited
using reactive magnetron sputtering. The magnetic properties of highly textured
exchange couples deposited on single crystal substrates are compared to those
of simultaneously deposited polycrystalline films, and both show comparable
exchange fields. These results are compared to current theories describing the
exchange coupling at the NiO/NiFe interface.Comment: 9 pages, Latex 2.09, 3 postscript figures. You can also this
manuscript at http://www.wsrcc.com/alison/fixed-nio/manuscript.html To be
published in _IEEE Trans. Magn._, Nov. 199
Search and Seizure: The Princess and the \u27Rock\u27 : Minnesota Declines to Extend Plain View to Plain Feel
State v. Dickerson, _481 N.W.2d 840 (Minn.), cert. granted, 113 S. Ct. 53 (interim ed. 1992)
Spectral variability on primitive asteroids of the Themis and Beagle families: space weathering effects or parent body heterogeneity?
Themis is an old and statistically robust asteroid family populating the
outer main belt, and resulting from a catastrophic collision that took place
2.51.0 Gyr ago. Within the old Themis family a young sub-family, Beagle,
formed less than 10 Myr ago, has been identified. We present the results of a
spectroscopic survey in the visible and near infrared range of 22 Themis and 8
Beagle families members. The Themis members investigated exhibit a wide range
of spectral behaviors, while the younger Beagle family members look spectrally
bluer with a smaller spectral slope variability. The best meteorite spectral
analogues found for both Themis and Beagle families members are carbonaceous
chondrites having experienced different degrees of aqueous alteration,
prevalently CM2 but also CV3 and CI, and some of them are chondrite samples
being unusual or heated. We extended the spectral analysis including the data
available in the literature on Themis and Beagle families members, and we
looked for correlations between spectral behavior and physical parameters using
the albedo and size values derived from the WISE data. The analysis of this
larger sample confirm the spectral diversity within the Themis family and that
Beagle members tend to be bluer and to have an higher albedo. The differences
between the two family may be partially explained by space weathering
processes, which act on these primitive surfaces in a similar way than on
S-type asteroids, i.e. producing reddening and darkening. However we see
several Themis members having albedos and spectral slopes similar to the young
Beagle members. Alternative scenarios are proposed including heterogeneity in
the parent body having a compositional gradient with depth, and/or the survival
of projectile fragments having a different composition than the parent body.Comment: Manuscript pages: 40; Figures: 15 ; Tables: 4 Icarus (2016),in pres
Josephson junction qubit network with current-controlled interaction
We design and evaluate a scalable charge qubit chain network with
controllable current-current coupling of neighbouring qubit loops via local
dc-current gates. The network allows construction of general N-qubit gates. The
proposed design is in line with current main stream experiments.Comment: 4 pages, 4 figure
Detector Channel Combining Results from a High Photon Efficiency Optical Communications Link Test Bed
The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is developing a low cost, scalable, photon-counting receiver prototype for space-to-ground optical communications links. The receiver is being tested in a test bed that emulates photon-starved space-to-ground optical communication links. The receiver uses an array of single-pixel fiber-coupled superconducting nanowire single-photon detectors. The receiver is designed to receive the high photon efficiency serially concatenated pulse position modulation (SCPPM) waveform specified in the Consultative Committee for Space Data Systems (CCSDS) Optical Communications Coding and Synchronization Blue Book Standard. The optical receiver consists of an array of single-pixel superconducting nanowire detectors, analog phase shifters for channel alignment, digitizers for each detector channel, and digital processing of the received signal. An overview of the test bed and arrayed receiver system is given. Simulation and system characterization results are presented. The data rate increase of using a four-channel arrayed detector system over using one single pixel nanowire detector is characterized. Results indicate that a single-pixel detector is capable of receiving data at a rate of 40 Mbps and a four-channel arrayed detector system is capable of receiving data at a rate of 130 Mbps
- …