Optimisation of the parameters of an extended defect model applied to non-amorphizing implants

In this paper, we present the optimisation of the parameters of a physical model of the kinetics of extended defects and applied the model with the optimised parameters to non-amorphizing implants. The model describes the small clusters, the {113} defects and the dislocation loops. In the first part, we determine the formation energies of the small clusters, the fault energy of the {113} defects, their Burgers vector and the self-diffusivity of silicon using TEM measurements and extractions of the supersaturation from the spreading of boron marker layers in low-dose implanted silicon. The improvements of the simulations are presented for the fitted experiments and for other wafers annealed at intermediate temperatures. In the second part, we increase the dose and energy of the non-amorphizing implant, leading to the transformation of {113} defects into dislocation loops. The predictions obtained with the optimised model are shown to be in agreement with the measurements. (c) 2005 Elsevier B.V. All rights reserved

Surface functionalisation of nanodiamonds for human neural stem cell adhesion and proliferation.

Biological systems interact with nanostructured materials on a sub-cellular level. These interactions may govern cell behaviour and the precise control of a nanomaterial's structure and surface chemistry allow for a high degree of tunability to be achieved. Cells are surrounded by an extra-cellular matrix with nano-topographical properties. Diamond based materials, and specifically nanostructured diamond has attracted much attention due to its extreme electrical and mechanical properties, chemical inertness and biocompatibility. Here the interaction of nanodiamond monolayers with human Neural Stem Cells (hNSCs) has been investigated. The effect of altering surface functionalisation of nanodiamonds on hNSC adhesion and proliferation has shown that confluent cellular attachment occurs on oxygen terminated nanodiamonds (O-NDs), but not on hydrogen terminated nanodiamonds (H-NDs). Analysis of H and O-NDs by Atomic Force Microscopy, contact angle measurements and protein adsorption suggests that differences in topography, wettability, surface charge and protein adsorption of these surfaces may underlie the difference in cellular adhesion of hNSCs reported here

Living on a flammable planet: interdisciplinary, cross-scalar and varied cultural lessons, prospects and challenges: Table 1.

Living with fire is a challenge for human communities because they are influenced by socio-economic, political, ecological and climatic processes at various spatial and temporal scales. Over the course of 2 days, the authors discussed how communities could live with fire challenges at local, national and transnational scales. Exploiting our diverse, international and interdisciplinary expertise, we outline generalizable properties of fire-adaptive communities in varied settings where cultural knowledge of fire is rich and diverse. At the national scale, we discussed policy and management challenges for countries that have diminishing fire knowledge, but for whom global climate change will bring new fire problems. Finally, we assessed major fire challenges that transcend national political boundaries, including the health burden of smoke plumes and the climate consequences of wildfires. It is clear that to best address the broad range of fire problems, a holistic wildfire scholarship must develop common agreement in working terms and build across disciplines. We must also communicate our understanding of fire and its importance to the media, politicians and the general public. This article is part of the themed issue ‘The interaction of fire and mankind’

Housing Arrangement and Location Determine the Likelihood of Housing Loss Due to Wildfire

Surging wildfires across the globe are contributing to escalating residential losses and have major social, economic, and ecological consequences. The highest losses in the U.S. occur in southern California, where nearly 1000 homes per year have been destroyed by wildfires since 2000. Wildfire risk reduction efforts focus primarily on fuel reduction and, to a lesser degree, on house characteristics and homeowner responsibility. However, the extent to which land use planning could alleviate wildfire risk has been largely missing from the debate despite large numbers of homes being placed in the most hazardous parts of the landscape. Our goal was to examine how housing location and arrangement affects the likelihood that a home will be lost when a wildfire occurs. We developed an extensive geographic dataset of structure locations, including more than 5500 structures that were destroyed or damaged by wildfire since 2001, and identified the main contributors to property loss in two extensive, fire-prone regions in southern California. The arrangement and location of structures strongly affected their susceptibility to wildfire, with property loss most likely at low to intermediate structure densities and in areas with a history of frequent fire. Rates of structure loss were higher when structures were surrounded by wildland vegetation, but were generally higher in herbaceous fuel types than in higher fuel-volume woody types. Empirically based maps developed using housing pattern and location performed better in distinguishing hazardous from non-hazardous areas than maps based on fuel distribution. The strong importance of housing arrangement and location indicate that land use planning may be a critical tool for reducing fire risk, but it will require reliable delineations of the most hazardous locations

Preparação e caracterização de um biocompósito obtido pela mistura de hidreto de titânio com nitrato de cálcio para implantes dentários

RESUMO Neste trabalho foram realizados estudos sobre a fabricação de um biocompósito à base de titânio para implantes dentários a partir da mistura de pó de hidreto de titânio (92%) com nitrato de cálcio (8% em volume). O pó de hidreto de titânio foi adicionado na solução aquosa de nitrato de cálcio, dissolvido por agitação mecânica, e em seguida os precursores foram misturados e dispersados/homogeneizados por ultrassom. Posteriormente, a mistura foi secada em evaporador rotativo, compactada com 600 MPa à temperatura ambiente, desmoldada e sinterizada em alto vácuo a 1200 oC durante 2 horas. Foi analisada a microestrutrura e fases formadas, as propriedades mecânicas, a rugosidade da superfície, a porosidade aberta, a molhabilidade da superfície e a citotoxicidade do biocompósito. As fases identificadas após a sinterização foram α-Ti e CaTiO3. O limite de resistência em compressão, o módulo de Young (E) e o ângulo de contato do biocompósito diminuíram significativamente com relação ao hidreto de titânio puro sinterizado nas mesmas condições. O limite médio de resistência em compressão do hidreto de titânio foi de 1794,67 MPa e do biocompósito foi de 481,36 MPa. O módulo de Young e o ângulo de contato do hidreto de titânio e do biocompósito foram de aproximadamente 112 GPa e 94 graus, e de 75 GPa e 83 graus, respectivamente. A rugosidade de superfície foi da mesma ordem de grandeza entre os materiais e ficou aproximadamente entre 1,4 e 1,5 µm (Ra) e 1,4 e 1,9 µm (Ra e Sa), medidas com rugosímetro de contato e com microscópio confocal a laser, respectivamente. A porosidade aberta do biocompósito sinterizado foi de aproximadamente três vezes maior do que aquela do hidreto de titânio sinterizado. Nos ensaios de citotoxicidade a porcentagem de células viáveis do biocompósito foi superior àquela do controle negativo e àquela do hidreto de titânio sinterizado