Existence of immersed spheres minimizing curvature functionals in compact 3-manifolds

We study curvature functionals for immersed 2-spheres in a compact, three-dimensional Riemannian manifold M. Under the assumption that the sectional curvature of M is strictly positive, we prove the existence of a smoothly immersed sphere minimizing the L^{2} integral of the second fundamental form. Assuming instead that the sectional curvature is less than or equal to 2, and that there exists a point in M with scalar curvature bigger than 6, we obtain a smooth 2-sphere minimizing the integral of 1/4|H|^{2} +1, where H is the mean curvature vector

The Digital Death Conundrum: How Federal and State Laws Prevent Fiduciaries from Managing Digital Property

This article discusses four types of fiduciaries, each of which is affected by the vast growth in and the need to manage digital property. The article begins by defining digital property and discussing why it must be managed. The article then discusses how digital property affects powers of attorney, conservatorships, probate administration, and trusts. After illustrating the problems that digital property creates for each fiduciary, the article shifts to resolving these problems. It begins by debunking purported solutions by both private and governmental entities. It concludes by offering a holistic approach to resolving the conflicts facing account holders, fiduciaries, and service providers and providing the level of security sought in fiduciary property management, as well as a best-practices approach in the interim to a complete solution

Identifying Advantages and Disadvantages of Variable Rate Irrigation – An Updated Review

Variable rate irrigation (VRI) sprinklers on mechanical move irrigation systems (center pivot or lateral move) have been commercially available since 2004. Although the number of VRI, zone or individual sprinkler, systems adopted to date is lower than expected there is a continued interest to harness this technology, especially when climate variability, regulatory nutrient management, water conservation policies, and declining water for agriculture compound the challenges involved for irrigated crop production. This article reviews the potential advantages and potential disadvantages of VRI technology for moving sprinklers, provides updated examples on such aspects, suggests a protocol for designing and implementing VRI technology and reports on the recent advancements. The advantages of VRI technology are demonstrated in the areas of agronomic improvement, greater economic returns, environmental protection and risk management, while the main drawbacks to VRI technology include the complexity to successfully implement the technology and the lack of evidence that it assures better performance in net profit or water savings. Although advances have been made in VRI technologies, its penetration into the market will continue to depend on tangible and perceived benefits by producers

Effect of stall base type on herd health, costs, and producer satisfaction

The objective of this field study was to compare effect of stall base on herd health, stall maintenance, bedding cost, and producer satisfaction. Ninety-one dairies visited during a 4-mo period starting October 14, 2005 included 33 rubber-filled mattress (RFM), 27 sand, and 31 waterbed (WB) dairies. In this study, percent culled was higher for RFM (P = 0.001) and sand (P = 0.06) than WB stall base dairies. Percent of cows in fourth lactation or greater was higher on WB than either RFM (P = 0.01) or sand (P = 0.02) dairies. There was no difference between base types for production or somatic cell count. Bedding cost per bed per week was WB ($0.73), RFM ($0.89), and sand ($0.97). Sand beds were bedded less frequently (P = 0.01). Comparisons between RFM and sand indicate higher satisfaction for RFM regarding manure management (P \u3c 0.0001) and higher satisfaction with sand for cow comfort (P \u3c 0.0001). Producers with WB were more satisfied with base life (P \u3c 0.000 1) and cow comfort (P \u3c 0.000 1) than those with RFM. Producers with WB were more satisfied with cow longevity (P \u3c 0.0001) as compared to RFM. Length of sand stall was correlated with longevity (0.56, P = 0.01) while percent of mature cows was greater on dairies that provided WBs (P = 0.02). This data indicates that WB may be a viable option for cows and producers, when good quality sand is unavailable or handling sand-laden manure is not feasible

Survey of Dairy Management Practices on One Hundred Thirteen North Central and Northeastern United States Dairies

The objective was to conduct a broad survey of dairy management practices that have an effect on animal well-being. Dairies were visited during the fall and winter of 2005 and 2006 in Wisconsin, Minnesota, Indiana, Iowa, and New York. Data were collected on 113 dairies on colostrum feeding, dehorning, tail-docking, euthanasia methods, producer statements about welfare, use of specialized calf-raising farms (custom), level of satisfaction with calf-raising by producers, and cow behavior. Calves were raised by the owner on 50.4% of dairies; 30.1% were raised on custom farms during the milk-feeding period, 18.6% were custom raised after weaning, and 1% sold calves with the option to buy them back as first-lactation heifers. A total of 51.8% of producers were very satisfied with their current calf-raising methods. Three feedings of colostrum were fed to the calves on 23.9% of dairies, 2 feedings on 39.8% of farms, 1 feeding on 31.0% of farms, and colostrum replacement products were fed on 5.3% of farms. Many farms (61.9%) provided 3.8 L at first feeding. Calves were dehorned at different ages by various methods. By 8 wk, 34.5% of calves were dehorned. By 12 wk, 78.8% of calves were dehorned. The majority of calves were dehorned by hot iron (67.3%). The remainder were dehorned by gouging (8.8%), paste (9.7%), saw (3.5%), or unknown by calf owner (10.6%). Anesthetic use was reported by 12.4% of dairy owners and analgesia use by 1.8%. Tail-docking was observed on 82.3% of dairies. The most common reported docking time was pre- or postcalving (35.2%). The second most commonly reported time was d 1 (15.4%). Rubber band was the most common method (92.5%), followed by amputation (7.5%). Three dairies amputated precalving, 1 at 2 mo and 3 at d 1 or 2. Cow hygiene was the most common reason given to dock (73.5%), followed by parlor worker comfort (17.4%) and udder health (1.0%). Producers reported 2.0% of cows obviously lame. Gun was the preferred euthanasia method (85.7%), followed by i.v. euthanasia (8.0%), live pick-up (1.8%), and nondisclosure (3.5%). Most producers (77.9%) stated that cows were in an improved environment as compared with 20 yr ago, whereas 8.0% stated conditions were worse, and 14.2% were undecided. Dairies with higher percentages of cows that either approached or touched the observer had lower somatic cell counts. The survey results showed management practices that were important for animal welfare

Influence of Free-Stall Base on Tarsal Joint Lesions and Hygiene in Dairy Cows

The objective was to quantify the incidence of tarsal lesions and level of hygiene by stall bed type. Cows were scored on 100 dairies from Wisconsin, Minnesota, Indiana, Iowa, and New York in the fall and winter. Thirty-eight dairies used rubber-filled mattresses (RFM), 27 had sand beds, 29 had waterbeds, and 6 used compost packs (CPk). Stocking density, stall dimensions, bedding amount, bedding frequency, and type of bedding were recorded. One pen of early-lactation multiparous cows on each dairy was scored based on injury of the tarsal joints at the lateral and medial surfaces and tuber calcis at the dorsal, lateral, and medial surfaces. A tarsal score of 1 represented hair loss, 2 was moderate, and 3 indicated severe swelling. Differences between bed types in the percentages of cows with lesions were tested with one-way ANOVA by lesion severity and incidence, with farm as the experimental unit. Cows on sand beds or waterbeds had fewer lesion scores of 1, 2, and 3 than those on RFM. The percentages of score 1 were 54.6 ± 4.4 (RFM), 22.5 ± 4.7 (sand), and 29.8 ± 4.3 (waterbed), whereas the percentages of score 2 were 14.0 ± 1.4, 2.3 ± 1.5, and 5.0 ± 1.4, and of score 3 were 3.0 ± 0.4, 0.2 ± 0.4, and 0.4 ± 0.4. Cows on CPk had no lesions. Hygiene scores ranged from 1 to 5, with 1 being clean and 5 soiled. The percentages of hygiene score 1 were 0 (compost), 0.4 (RFM), 0.4 (sand), and 0.4 (waterbeds); those with score 2 were 79.0, 84.0 ± 0.01, 73.2 ± 0.01, and 80.4 ± 0.01; with score 3 were 20.3, 15.2 ± 0.01, 23.8 ± 0.01, and 18.6 ± 0.01; with score 4 were 0.8, 0.005 ± 0.001, 0.006 ± 0.001, and 0.025 ± 0.003; and with score 5 was 0 for all bed types. Cows on RFM and waterbeds had improved hygiene compared with cows on sand beds. There was no difference in somatic cell count (SCC) by bed type. The percentage of cows in fourth lactation or greater on waterbeds (19.8 ± 1.8) was greater than those on RFM (13.3 ± 1.6) or on sand (13.5 ± 1.8). The percentage culled was lower for cows on waterbeds than on RFM (22.8 ± 1.5 vs. 29.4 ± 1.4). Score 3 tarsal lesions were correlated (r = 0.60) with SCC. The length of the sand bed was correlated with a greater percentage of mature cows. The SCC was correlated with the percentage of cows reported lame on the day of the visit (r = 0.45) and with neck rail height (r = −0.26). On dairies with RFM, severe lesions (r = 0.60), death losses (r = 0.52), and percentage of the herd reported lame on the day of the visit (r = 0.52) were all correlated with the SCC. Dairies with higher percentages of lesions had higher SCC, death losses, lameness, and culling rates. Adding bedding several times per week may reduce the incidence of lesions

Effect of stall base type on herd health, costs, and producer satisfaction

The objective of this field study was to compare effect of stall base on herd health, stall maintenance, bedding cost, and producer satisfaction. Ninety-one dairies visited during a 4-mo period starting October 14, 2005 included 33 rubber-filled mattress (RFM), 27 sand, and 31 waterbed (WB) dairies. In this study, percent culled was higher for RFM (P = 0.001) and sand (P = 0.06) than WB stall base dairies. Percent of cows in fourth lactation or greater was higher on WB than either RFM (P = 0.01) or sand (P = 0.02) dairies. There was no difference between base types for production or somatic cell count. Bedding cost per bed per week was WB ($0.73), RFM ($0.89), and sand ($0.97). Sand beds were bedded less frequently (P = 0.01). Comparisons between RFM and sand indicate higher satisfaction for RFM regarding manure management (P \u3c 0.0001) and higher satisfaction with sand for cow comfort (P \u3c 0.0001). Producers with WB were more satisfied with base life (P \u3c 0.000 1) and cow comfort (P \u3c 0.000 1) than those with RFM. Producers with WB were more satisfied with cow longevity (P \u3c 0.0001) as compared to RFM. Length of sand stall was correlated with longevity (0.56, P = 0.01) while percent of mature cows was greater on dairies that provided WBs (P = 0.02). This data indicates that WB may be a viable option for cows and producers, when good quality sand is unavailable or handling sand-laden manure is not feasible