5 research outputs found
Macromolecular Engineering of Biomass Polymers and Stimuli-Responsive Materials Towards Enhanced Thermomechanical Properties
Commodity polymers are used in every aspect of daily life, and most of these polymeric materials are synthesized using petroleum-derived sources. There are direct environmental consequences to this petroleum dependence including greenhouse gas emissions and climate change. Biomass-based polymers show promise for the mitigation on negative environmental impact, in comparison with petroleum-derived counterparts. However, some biopolymers suffer from low chain entanglement due to bulky or long side chain structures, resulting in poor mechanical properties. In this dissertation work, macromolecular engineering is used to design biomass-derived polymers featuring a variety of structures and functionalities. Additionally, biopolymer properties (including thermomechanical enhancement) and applications such as polymer coatings and stimuli- responsive materials are discussed.
The first part of this dissertation focuses on strategies to overcome poor chain entanglement. Through macromolecular engineering, resultant polymer microstructure can be controlled to produce biomass-based polymers with industrially competitive thermomechanical properties. Specifically, supramolecular interactions are introduced to facilitate chain entanglement of polymers from biomass, which exhibit impressive enhancement of mechanical properties. In Chapter 2,, hydrogen-bonding (H-bonding) is used to enhance interactions between two complementary polymers. One polymer contains pendant acid groups as H-bonding donors that interact with H-bonding acceptor polymers such as poly(4-vinylpyridine). The blending results in well-entangled polymer chains that can dissipate stress and provide enhancement in tensile strength and toughness. While in Chapter 3, metal-ligand coordination is used to promote entanglements within plant oil- derived copolymers. Metal-ligand coordination imparts unique and promising properties on these materials. The stimuli-responsive properties of both materials are also discussed.
The second part of this dissertation focuses on applications of biomass-based polymeric materials. In Chapter 4, focus switches to the development of an industrially relevant free- radical emulsion polymerization approach. A series of copolymers are synthesized featuring a plant oil-derived methacrylate copolymerized with styrene, methyl methacrylate, and butyl acrylate. Finally, a simple oxidative crosslinking strategy is used to enhance mechanical properties and provide strong, tough materials for potential coating applications.
In Chapter 5, epoxy resin nanocomposites are featured for their use as potential shape memory materials. Soybean-oil derived polymers are polymerized onto cellulose nanocrystals (CNCs) using a grafting-from SI-ATRP strategy with subsequent crosslinking using amine-catalyzed anhydride-epoxy curing. The strength of resulting epoxy resins provided an optimal permanent network allowing for good shape recovery, while the tunable glass transition temperature allowed for ease in shape fixity.
Finally, in Chapter 6, the summary and conclusions are given. Additionally, novel strategies for future work in overcoming poor entanglement for other biomass-derived polymers are presented
Solid Waste Gasification: Comparison of Single- and Multi-Staged Reactors
Interest in converting waste into renewable energy has increased recently due to concerns about sustainability and climate change. This solid waste is mainly derived from municipal solid waste (MSW), biomass residue, plastic waste, and their mixtures. Gasification is one commonly applied technology that can convert solid waste into usable gases, including H2, CO, CH4, and CO2. Single- and multi-staged reactors have been utilized for solid waste gasification. Comparison in reactor dimensions, operating factors (e.g., gasification agent, temperature, and feed composition), performance (e.g., syngas yield and selectivity), advantages, and disadvantages are discussed and summarized. Additionally, discussion will include economic and advanced catalysts which have been developed for use in solid waste gasification. The multi-staged reactor can not only be applied for gasification, but also for pyrolysis and torrefaction
Material Extrusion Additive Manufacturing of Wood and Lignocellulosic Filled Composites
Wood and lignocellulosic-based material components are explored in this review as functional additives and reinforcements in composites for extrusion-based additive manufacturing (AM) or 3D printing. The motivation for using these sustainable alternatives in 3D printing includes enhancing material properties of the resulting printed parts, while providing a green alternative to carbon or glass filled polymer matrices, all at reduced material costs. Previous review articles on this topic have focused only on introducing the use of natural fillers with material extrusion AM and discussion of their subsequent material properties. This review not only discusses the present state of materials extrusion AM using natural filler-based composites but will also fill in the knowledge gap regarding state-of-the-art applications of these materials. Emphasis will also be placed on addressing the challenges associated with 3D printing using these materials, including use with large-scale manufacturing, while providing insight to overcome these issues in the future
Biomass approach toward robust, sustainable, multiple-shape-memory materials
We report biomass-derived, shape-memory materials prepared via simple reactions, including "grafting from" ATRP and TAD click chemistry. Although the biomass, including plant oils and cellulose nanocrystals, has heterogeneous chemical structures in nature, these materials exhibit excellent multiple shape-memory properties toward temperature, water, and organic solvents, which are comparable to petroleum counterparts. The work presented herein provides burgeoning opportunities to design the next-generation, low-cost, biomass-prevalent, green materials for niche applications
Expression quantitative trait locus fine mapping of the 17q12–21 asthma locus in African American children: a genetic association and gene expression study
Background: African ancestry is associated with a higher prevalence and greater severity of asthma than European ancestries, yet genetic studies of the most common locus associated with childhood-onset asthma, 17q12–21, in African Americans have been inconclusive. The aim of this study was to leverage both the phenotyping of the Children's Respiratory and Environmental Workgroup (CREW) birth cohort consortium, and the reduced linkage disequilibrium in African Americans, to fine map the 17q12–21 locus. Methods: We first did a genetic association study and meta-analysis using 17q12–21 tag single-nucleotide polymorphisms (SNPs) for childhood-onset asthma in 1613 European American and 870 African American children from the CREW consortium. Nine tag SNPs were selected based on linkage disequilibrium patterns at 17q12–21 and their association with asthma, considering the effect allele under an additive model (0, 1, or 2 effect alleles). Results were meta-analysed with publicly available summary data from the EVE consortium (on 4303 European American and 3034 African American individuals) for seven of the nine SNPs of interest. Subsequently, we tested for expression quantitative trait loci (eQTLs) among the SNPs associated with childhood-onset asthma and the expression of 17q12–21 genes in resting peripheral blood mononuclear cells (PBMCs) from 85 African American CREW children and in upper airway epithelial cells from 246 African American CREW children; and in lower airway epithelial cells from 44 European American and 72 African American adults from a case-control study of asthma genetic risk in Chicago (IL, USA). Findings: 17q12–21 SNPs were broadly associated with asthma in European Americans. Only two SNPs (rs2305480 in gasdermin-B [GSDMB] and rs8076131 in ORMDL sphingolipid biosynthesis regulator 3 [ORMDL3]) were associated with asthma in African Americans, at a Bonferroni-corrected threshold of p<0·0055 (for rs2305480_G, odds ratio [OR] 1·36 [95% CI 1·12–1·65], p=0·0014; and for rs8076131_A, OR 1·37 [1·13–1·67], p=0·0010). In upper airway epithelial cells from African American children, genotype at rs2305480 was the most significant eQTL for GSDMB (eQTL effect size [β] 1·35 [95% CI 1·25–1·46], p<0·0001), and to a lesser extent showed an eQTL effect for post-GPI attachment to proteins phospholipase 3 (β 1·15 [1·08–1·22], p<0·0001). No SNPs were eQTLs for ORMDL3. By contrast, in PBMCs, the five core SNPs were associated only with expression of GSDMB and ORMDL3. Genotype at rs12936231 (in zona pellucida binding protein 2) showed the strongest associations across both genes (for GSDMB, eQTLβ 1·24 [1·15–1·32], p<0·0001; and for ORMDL3 (β 1·19 [1·12–1·24], p<0·0001). The eQTL effects of rs2305480 on GSDMB expression were replicated in lower airway cells from African American adults (β 1·29 [1·15–1·44], p<0·0001). Interpretation: Our study suggests that SNPs regulating GSDMB expression in airway epithelial cells have a major role in childhood-onset asthma, whereas SNPs regulating the expression levels of 17q12–21 genes in resting blood cells are not central to asthma risk. Our genetic and gene expression data in African Americans and European Americans indicated GSDMB to be the leading candidate gene at this important asthma locus.6 month embargo; published: 01 May 2020This item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at [email protected]