33 research outputs found
Analyzing Microstructural Features, Surface Topography, and Scratch Resistance of Innovative Nano-Composites Coated with High Velocity Air-Fuel Technology
New developments in thermal spraying processes may offer higher-quality alternatives to hard chrome plating and possibilities for hard chrome plating in a range of coating applications. These include spraying with high-velocity air fuel (HVAF) and new spray consumables. The low operating temperatures and accelerated particle velocity of the HVAF process enable investigation and development of a wide range of novel coating materials and applications. The High-velocity Air Fuel Process' quality and efficiency are primarily due to the broad combustion chamber and axial injection of the feedstock through it, as well as the relatively low combustion temperature of an air-fuel mixture and the low gas velocity that provides enough time for the mild heating of the powder particles. The current work discusses the inventive thermal spray procedure used for SAE 1008 carbon steel, a cost-effective substrate material. All of the compositions that were treated have undergone microstructure investigations. A scratch test is conducted in accordance with ASTM guidelines. Assessment of surface morphology clearly demonstrates the relationship between the evaluated parameters. According to the occurrence, scratch methods such as delamination, cracking, plastic deformation, and elastic deformation are highlighted. However, the findings of the scratch test showed that the samples' scratch resistance increased as the coating thickness rose. In comparison to samples with thinner coating, those with thicker coating demonstrated a stronger resistance to scratching. This is explained by the fact that coatings with a higher thickness and density can support the subsurface more effectively and stop cracks from scattering. This can retain the coating's integrity and stop more damage from occurring, improving scratch resistance. Better scratch resistance was displayed by the samples with denser microstructures and smoother surface morphologies.
The outcome is greater scratch resistance because a higher density covering can withstand deformation and fracture better than a lower density layer. This is due to the mechanism of deformation and fracture in the coating material. This improvement in scratch resistance can be due to the composites' increased HVAF coating's hardness and adherence. The findings imply that using an HVAF coating to increase the scratch resistance of new nanocomposites may constitute a successful strategy
Analyzing Microstructural Features, Surface Topography, and Scratch Resistance of Innovative Nano-Composites Coated with High Velocity Air-Fuel Technology
New developments in thermal spraying processes may offer higher-quality alternatives to hard chrome plating and possibilities for hard chrome plating in a range of coating applications. These include spraying with high-velocity air fuel (HVAF) and new spray consumables. The low operating temperatures and accelerated particle velocity of the HVAF process enable investigation and development of a wide range of novel coating materials and applications. The High-velocity Air Fuel Process' quality and efficiency are primarily due to the broad combustion chamber and axial injection of the feedstock through it, as well as the relatively low combustion temperature of an air-fuel mixture and the low gas velocity that provides enough time for the mild heating of the powder particles. The current work discusses the inventive thermal spray procedure used for SAE 1008 carbon steel, a cost-effective substrate material. All of the compositions that were treated have undergone microstructure investigations. A scratch test is conducted in accordance with ASTM guidelines. Assessment of surface morphology clearly demonstrates the relationship between the evaluated parameters. According to the occurrence, scratch methods such as delamination, cracking, plastic deformation, and elastic deformation are highlighted. However, the findings of the scratch test showed that the samples' scratch resistance increased as the coating thickness rose. In comparison to samples with thinner coating, those with thicker coating demonstrated a stronger resistance to scratching. This is explained by the fact that coatings with a higher thickness and density can support the subsurface more effectively and stop cracks from scattering. This can retain the coating's integrity and stop more damage from occurring, improving scratch resistance. Better scratch resistance was displayed by the samples with denser microstructures and smoother surface morphologies.
The outcome is greater scratch resistance because a higher density covering can withstand deformation and fracture better than a lower density layer. This is due to the mechanism of deformation and fracture in the coating material. This improvement in scratch resistance can be due to the composites' increased HVAF coating's hardness and adherence. The findings imply that using an HVAF coating to increase the scratch resistance of new nanocomposites may constitute a successful strategy
The NIDDK Central Repository at 8 years—Ambition, Revision, Use and Impact
The National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK) Central Repository makes data and biospecimens from NIDDK-funded research available to the broader scientific community. It thereby facilitates: the testing of new hypotheses without new data or biospecimen collection; pooling data across several studies to increase statistical power; and informative genetic analyses using the Repository’s well-curated phenotypic data. This article describes the initial database plan for the Repository and its revision using a simpler model. Among the lessons learned were the trade-offs between the complexity of a database design and the costs in time and money of implementation; the importance of integrating consent documents into the basic design; the crucial need for linkage files that associate biospecimen IDs with the masked subject IDs used in deposited data sets; and the importance of standardized procedures to test the integrity data sets prior to distribution. The Repository is currently tracking 111 ongoing NIDDK-funded studies many of which include genotype data, and it houses over 5 million biospecimens of more than 25 types including serum, plasma, stool, urine, DNA, red blood cells, buffy coat and tissue. Repository resources have supported a range of biochemical, clinical, statistical and genetic research (188 external requests for clinical data and 31 for biospecimens have been approved or are pending). Genetic research has included GWAS, validation studies, development of methods to improve statistical power of GWAS and testing of new statistical methods for genetic research. We anticipate that the future impact of the Repository’s resources on biomedical research will be enhanced by (i) cross-listing of Repository biospecimens in additional searchable databases and biobank catalogs; (ii) ongoing deployment of new applications for querying the contents of the Repository; and (iii) increased harmonization of procedures, data collection strategies, questionnaires etc. across both research studies and within the vocabularies used by different repositories
Epigenetic regulation of prostate cancer
Prostate cancer is a commonly diagnosed cancer in men and a leading cause of cancer deaths. Whilst the underlying mechanisms leading to prostate cancer are still to be determined, it is evident that both genetic and epigenetic changes contribute to the development and progression of this disease. Epigenetic changes involving DNA hypo- and hypermethylation, altered histone modifications and more recently changes in microRNA expression have been detected at a range of genes associated with prostate cancer. Furthermore, there is evidence that particular epigenetic changes are associated with different stages of the disease. Whilst early detection can lead to effective treatment, and androgen deprivation therapy has a high response rate, many tumours develop towards hormone-refractory prostate cancer, for which there is no successful treatment. Reliable markers for early detection and more effective treatment strategies are, therefore, needed. Consequently, there is a considerable interest in the potential of epigenetic changes as markers or targets for therapy in prostate cancer. Epigenetic modifiers that demethylate DNA and inhibit histone deacetylases have recently been explored to reactivate silenced gene expression in cancer. However, further understanding of the mechanisms and the effects of chromatin modulation in prostate cancer are required. In this review, we examine the current literature on epigenetic changes associated with prostate cancer and discuss the potential use of epigenetic modifiers for treatment of this disease
Epigenetic modulators as therapeutic targets in prostate cancer
Prostate cancer is one of the most common non-cutaneous malignancies among men worldwide. Epigenetic aberrations, including changes in DNA methylation patterns and/or histone modifications, are key drivers of prostate carcinogenesis. These epigenetic defects might be due to deregulated function and/or expression of the epigenetic machinery, affecting the expression of several important genes. Remarkably, epigenetic modifications are reversible and numerous compounds that target the epigenetic enzymes and regulatory proteins were reported to be effective in cancer growth control. In fact, some of these drugs are already being tested in clinical trials. This review discusses the most important epigenetic alterations in prostate cancer, highlighting the role of epigenetic modulating compounds in pre-clinical and clinical trials as potential therapeutic agents for prostate cancer management.info:eu-repo/semantics/publishedVersio
Performance evaluation of the bioreactor landfill in treatment and stabilisation of mechanically biologically treated municipal solid waste
The potential of bioreactor landfills to treat mechanically biologically treated municipal solid waste is analysed in this study. Developing countries like India and China have begun to investigate bioreactor landfills for municipal solid waste management. This article describes the impacts of leachate recirculation on waste stabilisation, landfill gas generation, leachate characteristics and long-term waste settlement. A small-scale and large-scale anaerobic cell were filled with mechanically biologically treated municipal solid waste collected from a landfill site at the outskirts of Bangalore, India. Leachate collected from the same landfill site was recirculated at the rate of 2-5 times a month on a regular basis for 370 days. The total quantity of gas generated was around 416 L in the large-scale reactor and 21 L in the small-scale reactor, respectively. Differential settlements ranging from 20%-26% were observed at two different locations in the large reactor, whereas 30% of settlement was observed in the small reactor. The biological oxygen demand/chemical oxygen demand (COD) ratio indicated that the waste in the large reactor was stabilised at the end of 1 year. The performance of the bioreactor with respect to the reactor size, temperature, landfill gas and leachate quality was analysed and it was found that the bioreactor landfill is efficient in the treatment and stabilising of mechanically biologically treated municipal solid waste
Estimation of the components of municipal solid waste settlement
Estimation of the municipal solid waste settlements and the contribution of each of the components are essential in the estimation of the volume of the waste that can be accommodated in a landfill and increase the post-usage of the landfill. This article describes an experimental methodology for estimating and separating primary settlement, settlement owing to creep and biodegradation-induced settlement. The primary settlement and secondary settlement have been estimated and separated based on 100% pore pressure dissipation time and the coefficient of consolidation. Mechanical creep and biodegradation settlements were estimated and separated based on the observed time required for landfill gas production. The results of a series of laboratory triaxial tests, creep tests and anaerobic reactor cell setups were conducted to describe the components of settlement. All the tests were conducted on municipal solid waste (compost reject) samples. It was observed that biodegradation accounted to more than 40% of the total settlement, whereas mechanical creep contributed more than 20% towards the total settlement. The essential model parameters, such as the compression ratio (C-c'), rate of mechanical creep (c), coefficient of mechanical creep (b), rate of biodegradation (d) and the total strain owing to biodegradation (E-DG), are useful parameters in the estimation of total settlements as well as components of settlement in landfill
Reliability Based Approach for the Prediction of Leachate Head in MSW Landfills
The paper presents the reliability-based approach to assess the performance of landfill considering uncertainties associated with the hydraulic properties of various components of the system. A model domain having final cover system and municipal solid waste (MSW) layer is considered as an integrated system for the analysis. Water balance is computed using the Hydrologic Evaluation of Landfill Performance (HELP) model to construct response surfaces for the reliability analysis. The probability of accumulation of leachate head (ha c) at the bottom of the MSW layer above an allowable head (ha l) is considered as the criterion for reliability estimates in this study. The results of the analysis are discussed in terms of the reliability index, β. The impact of variations in (a) hydraulic characteristics of the various layers (b) defects and placement conditions of geomembrane (GM) on the system performance have been studied. The results reveal that the hydraulic conductivity of compacted clay layer (CCL) of the cover component along with the porosity and saturated hydraulic conductivity of MSW layer are the significant parameters, which influence the reliability. Further, impact of model uncertainty and parametric analysis of significant variables are conducted and the results are discussed
Performance evaluation of the bioreactor landfill in treatment and stabilisation of mechanically biologically treated municipal solid waste
The potential of bioreactor landfills to treat mechanically biologically treated municipal solid waste is analysed in this study. Developing countries like India and China have begun to investigate bioreactor landfills for municipal solid waste management. This article describes the impacts of leachate recirculation on waste stabilisation, landfill gas generation, leachate characteristics and long-term waste settlement. A small-scale and large-scale anaerobic cell were filled with mechanically biologically treated municipal solid waste collected from a landfill site at the outskirts of Bangalore, India. Leachate collected from the same landfill site was recirculated at the rate of 2-5 times a month on a regular basis for 370 days. The total quantity of gas generated was around 416 L in the large-scale reactor and 21 L in the small-scale reactor, respectively. Differential settlements ranging from 20%-26% were observed at two different locations in the large reactor, whereas 30% of settlement was observed in the small reactor. The biological oxygen demand/chemical oxygen demand (COD) ratio indicated that the waste in the large reactor was stabilised at the end of 1 year. The performance of the bioreactor with respect to the reactor size, temperature, landfill gas and leachate quality was analysed and it was found that the bioreactor landfill is efficient in the treatment and stabilising of mechanically biologically treated municipal solid waste