Nonlinear control design and averaging analysis of a full-bridge boost rectifier

We are considering the problem of controlling AC/DC full bridge converters. The control objectives are twofold:(i) guaranteeing a regulated voltage for the supplied load, (ii) enforcing power factor correction (PFC) with respect to the main supply network. The considered problem is dealt with using a nonlinear controller that involves two loops in cascade. The inner-loop is designed, using sliding mode approach, to cope with the PFC issue. The outer-loop is designed to regulate the converter output voltage. While several double-loop regulators (designed for different converters) can be found in the relevant literature, it is the first time that a so formal average analysis is developed that rigorously describes the controller performances. The development of such theoretical analysis framework is a major motivation of this paper.Postprint (published version

Electrical Properties Of Schottky Diodes Based On Poly (O-Toluidine) Deposited By Spincoating

The poly(o-toluidine) (POT) were synthesized by chemically oxidization. Their thin films were fabricated by spincoating on indium-tin-oxide (ITO) coated glass substrate. A Schottky diode with configuration ITO/POT/Al devices is fabricated. The Current-Voltage characteristics of the devices were non-linear indicating rectification behavior. The observed current-voltage characteristics can be satisfactorily fitted using the modified Shockley equation. The diode parameters were calculated from I-V characteristics and discussed. On the other hand, the Capacitance-Frequency and Capacitance-Voltage characteristics are presented and discussed.The poly(o-toluidine) (POT) were synthesized by chemically oxidization. Their thin films were fabricated by spincoating on indium-tin-oxide (ITO) coated glass substrate. A Schottky diode with configuration ITO/POT/Al devices is fabricated. The Current-Voltage characteristics of the devices were non-linear indicating rectification behavior. The observed current-voltage characteristics can be satisfactorily fitted using the modified Shockley equation. The diode parameters were calculated from I-V characteristics and discussed. On the other hand, the Capacitance-Frequency and Capacitance-Voltage characteristics are presented and discussed

Modelo de cabalgamiento profundo para el Alto Atlas (Marruecos). Implicaciones sísmicas en la zona de colisión entre Eurasia y Africa

Previous crustal models of the High Atlas suppose the existence of a mid-crustal detachment where all the surface thrusts merged and below which the lower crust was continuous. However, both seismic refraction data and gravity modeling detected a jump in crustal thickness between the High Atlas and the northern plains. Here we show that this rapid and vertical jump in the depth of Moho discontinuity suggests that a thrust fault may penetrate the lower crust and offset the Moho (deep-rooted “thick skinned” model). The distribution of Neogene and Quaternary volcanisms along and at the northern part of the High Atlas lineament can be related to the beginning of a partial continental subduction of the West African plate to the north underneath Moroccan microplate. Allowing from the complex problem of the plate boundary in the western zone of the Mediterranean, we propose to interpret the South-Atlasic fault zone as the actual northwestern boundary of the stable part of the African plate rather than the Azores-Gibraltar fault currently used.Los modelos geodinámicos existentes sobre la estructura profunda del alto Atlas suponen la existencia de un despegue medio-cortical donde convergen los cabalgamientos superficiales y bajo el cual la corteza inferior es continua. Los datos de sísmica de refracción y gravimetría, sin embargo, indican la existencia de una discontinuidad en el grosor de la corteza (profundidad del Moho) bajo el Alto Atlas. En este artículo ponemos de manifiesto que este salto rápido en la profundidad del Moho puede ser causado por un cabalgamiento que penetra la corteza inferior, desplazando la base de la misma (“deeprooted thick skinned model”). La distribución del volcanismo Neógeno y Cuaternario a lo largo de y al norte de la alineación del Alto Atlas pueden estar relacionados con el comienzo de una subducción continental parcial de la placa Africana occidental hacia el norte, bajo la microplaca marroquí. La expresión en superficie de este cabalgamiento, la zona de falla sud-atlásica, refleja la influencia de una sutura continental heredada de orogenias anteriores (panafricana, hercínica y rifting Jurásico). Por tanto, proponemos que este frente heredado representa el límite meridional de la zona de colisión mediterránea y el margen noroccidental de la porción estable de la placa africana

Biogeographic classification of the Caspian Sea

Like other inland seas, the Caspian Sea (CS) has been influenced by climate change and anthropogenic disturbance during recent decades, yet the scientific understanding of this water body remains poor. In this study, an eco-geographical classification of the CS based on physical information derived from space and in situ data is developed and tested against a set of biological observations. We used a two-step classification procedure, consisting of (i) a data reduction with self-organizing maps (SOMs) and (ii) a synthesis of the most relevant features into a reduced number of marine ecoregions using the hierarchical agglomerative clustering (HAC) method. From an initial set of 12 potential physical variables, 6 independent variables were selected for the classification algorithm, i.e., sea surface temperature (SST), bathymetry, sea ice, seasonal variation of sea surface salinity (DSSS), total suspended matter (TSM) and its seasonal variation (DTSM). The classification results reveal a robust separation between the northern and the middle/southern basins as well as a separation of the shallow nearshore waters from those offshore. The observed patterns in ecoregions can be attributed to differences in climate and geochemical factors such as distance from river, water depth and currents. A comparison of the annual and monthly mean Chl <i>a</i> concentrations between the different ecoregions shows significant differences (one-way ANOVA, <i>P</i> < 0.05). In particular, we found differences in phytoplankton phenology, with differences in the date of bloom initiation, its duration and amplitude between ecoregions. A first qualitative evaluation of differences in community composition based on recorded presence–absence patterns of 25 different species of plankton, fish and benthic invertebrate also confirms the relevance of the ecoregions as proxies for habitats with common biological characteristics

Schottky Diodes and Thin Films Based on Copolymer: Poly(aniline-co-toluidine)

Poly(aniline-co-o-toluidine) (PANI-co-POT) thin films were deposited on indium tin oxide- (ITO-) coated glass substrates by electrochemical polymerization under cyclic voltammetric conditions from aniline-co-o-toluidine monomer in an aqueous solution of HCl as a supporting electrolyte. These measurements showed that the optical band gap of the copolymer films is on the order of 2.65 eV. On the other hand, ITO/PANI-co-POT/Al devices were fabricated by thermal evaporation of Aluminum circular electrodes on the as-deposited PANI-co-POT films. The Current-Voltage characteristics of these devices are nonlinear. The diode parameters were calculated from I-V characteristics using the modified Shockley equation. The C-F characteristics were also measured

Ba(H2PO3)2.0.5H2O: Synthesis, crystal structure optimization, vibrational study, DFT computation and application as a corrosion inhibitor

This investigation involved the synthesis of barium phosphite Ba(H2PO3)2.0.5H2O by reacting barium chloride with phosphorous acid. The physical characteristics, FT-IR spectra, and X-ray diffraction were employed to validate the composition of the synthesized substance, and powder X-ray diffraction (PXRD)&nbsp;was used to determine the phase purity.&nbsp;The optimal molecular geometry, infrared intensities were calculated using density functional theory (DFT/B3LYP) methods with the LanL2DZ basis set. The HOMO-LUMO properties and geometries of this compound have been determined and discussed. The computational structural parameters are generally in agreement with the experimental investigations. The theoretical infrared for the title compound has been constructed. Additionally, the anti-corrosion properties of this compound were investigated in an acidic solution using weight loss and electrochemical techniques. The results showed good effectiveness, indicating the formation of a protective film on the C38 surface