Model of charge and magnetic order formation in itinerant electron systems

We propose a simple model of charge and/or magnetic order formation in systems containing both localized and itinerant electrons coupled by the on-site, spin-dependent interaction that represents Coulomb repulsion and Hund's rule (a generalized Falicov-Kimball model). Ground state properties of the model are analyzed on the square lattice on a basis of the phase diagrams that have been constructed rigorously, but in a restricted configurational space. For intermediate values of the coupling constants there are considerable ranges of itinerant electron densities where phases with complex charge and magnetic structures of the localized electrons have lower energy than the simplest antiferro- and ferromagnetic ones. A strong tendency towards the antiferromagnetic coupling between spins of localized electrons has been observed close to half-filling for any density of localized electrons, including situations where the magnetic ions are diluted. For small band fillings the ferromagnetic coupling between localized spins is predominant.Comment: 13 pages, 5 figure

Canonical Phase Diagrams of the 1-D Falicov-Kimball Model at T=0

The Falicov-Kimball model of spinless quantum electrons hopping on a 1-dimensional lattice and of immobile classical ions occupying some lattice sites, with only intrasite coupling between those particles, have been studied at zero temperature by means of well-controlled numerical procedures. For selected values of the unique coupling parameter $U$ the restricted phase diagrams (based on all the periodic configurations of localized particles (ions) with period not greater than 16 lattice constants, typically) have been constructed in the grand-canonical ensemble. Then these diagrams have been translated into the canonical ensemble. Compared to the diagrams obtained in other studies our ones contain more details, in particular they give better insight into the way the mixtures of periodic phases are formed. Our study has revealed several families of new characteristic phases like the generalized most homogeneous and the generalized crenel phases, a first example of a structural phase transition and a tendency to build up an additional symmetry -- the hole-particle symmetry with respect to the ions (electrons) only, as $U$ decreases.Comment: 24 pages, 8 figures (not included

Comparison of Novice and Experienced Drivers Using the SEEV Model to Predict Attention Allocation at Intersections During Simulated Driving

We compared the eye movements of novice drivers and experienced drivers while they drove a simulated driving scenario that included a number of intersections interspersed with stretches of straight road. The intersections included non-hazard events. Cassavaugh, Bos, McDonald, Gunaratne, & Backs (2013) attempted to model attention allocation of experienced drivers using the SEEV model. Here we compared two SEEV model fits between those experienced drivers and a sample of novice drivers. The first was a simplified model and the second was a more complex intersection model. The observed eye movement data was found to be a good fit to the simplified model for both experienced (R2 = 0.88) and novice drivers (R2 = 0.30). Like the previous results of the intersection model for the experienced drivers, the fit of the observed eye movement data to the intersection model for novice drivers was poor, and was no better than fitting the data to a randomized SEEV model. We concluded based on the simplified SEEV model, fixation count and fixation variance that experienced drivers were found to be more efficient at distributing their visual search compared to novice drivers

Fermilab research Program 1976

This collection of one-page summaries of Fermilab proposals is intended to serve as a way station between the experiment number with its short title and the full proposal. It is not intended to be a review of the Fermilab experimental program. Just as an abstract of a journal article embodies the main points of the article, so these one-page summaries are intended to convey the major points of a proposal. These should include its physics justification, a brief description of the apparatus and the demands that the experiment will make on the Laboratory. Of course these summaries are not intended to take the place of the proposal itself which is the primary document available in the Fermilab library and at SLAC, BNL and CERN. Individual copies should be obtained from the spokesman of the experiment whose name is underlined in these summaries. Summaries for all experiments and pending proposals are included. These comprise approved, unconsidered and deferred proposals. Rejected, withdrawn and inactive proposals are not included. It is the experimenters themselves who are best able to write the summary and in most cases that is what was done. For the early proposals and those cases where repeated cajoling could not produce one from the experimenters, the summary was prepared by a Fermilab staff member and then sent to the spokesman for comment. All proposals submitted before the May 7, 1976 deadline for consideration at the extended summer meeting of our Program Advisory Committee are included. It is not intended that this volume be updated annually but perhaps only reissued when the previous ones becomes hopelessly obsolete

Invasive ants reduce abundance of small rainforest skinks

Invasive ants are among the world's most damaging invasive species, often directly or indirectly affecting native fauna. Insecticidal baits are the main method for suppressing or eradicating invasive ant populations, but their use must be considered against potential for unintended effects on native organisms. The invasive yellow crazy ant (Anoplolepis gracillipes) is widespread in the tropics, particularly on islands, where they have displaced a range of invertebrates. Effects of this ant on vertebrates, and in continental ecosystems generally, are less studied. We investigated the effects of yellow crazy ants and bait application on rainforest skinks and their invertebrate prey. We compared skink and skink prey abundance across four replicated rainforest site categories: high and low yellow crazy ant sites had both been baited but differed in yellow crazy ant activity; control sites had never had yellow crazy ants or been baited; and buffer sites had never had yellow crazy ants but had been baited. We recorded significantly lower abundance of two small skink species (Lygisaurus laevis and Saproscincus tetradactylus) in high yellow crazy ant sites compared to all other site categories. The differences persisted even after baiting reduced yellow crazy ant activity by 97.8% +/- 0.04% (mean +/- SD). A larger rainforest skink species (Carlia rubrigularis) was not negatively affected by yellow crazy ant invasion. Skink prey abundance was significantly lower in high yellow crazy ant sites compared to control sites and low yellow crazy ant sites, but not compared to buffer sites. These differences did not persist following baiting. We found no evidence that baiting negatively affects skinks or their invertebrate prey. Our data suggest that yellow crazy ants, but not the bait used to treat them, pose a direct threat to small rainforest skinks

Comparison of Novice and Experienced Drivers Using the SEEV Model to Predict Attention Allocation at Intersections During Simulated Driving

We compared the eye movements of novice drivers and experienced drivers while they drove a simulated driving scenario that included a number of intersections interspersed with stretches of straight road. The intersections included non-hazard events. Cassavaugh, Bos, McDonald, Gunaratne, & Backs (2013) attempted to model attention allocation of experienced drivers using the SEEV model. Here we compared two SEEV model fits between those experienced drivers and a sample of novice drivers. The first was a simplified model and the second was a more complex intersection model. The observed eye movement data was found to be a good fit to the simplified model for both experienced (R2 = 0.88) and novice drivers (R2 = 0.30). Like the previous results of the intersection model for the experienced drivers, the fit of the observed eye movement data to the intersection model for novice drivers was poor, and was no better than fitting the data to a randomized SEEV model. We concluded based on the simplified SEEV model, fixation count and fixation variance that experienced drivers were found to be more efficient at distributing their visual search compared to novice drivers

Fabricating Composite-Material Structures Containing SMA Ribbons

An improved method of designing and fabricating laminated composite-material (matrix/fiber) structures containing embedded shape-memory-alloy (SMA) actuators has been devised. Structures made by this method have repeatable, predictable properties, and fabrication processes can readily be automated. Such structures, denoted as shape-memory-alloy hybrid composite (SMAHC) structures, have been investigated for their potential to satisfy requirements to control the shapes or thermoelastic responses of themselves or of other structures into which they might be incorporated, or to control noise and vibrations. Much of the prior work on SMAHC structures has involved the use SMA wires embedded within matrices or within sleeves through parent structures. The disadvantages of using SMA wires as the embedded actuators include (1) complexity of fabrication procedures because of the relatively large numbers of actuators usually needed; (2) sensitivity to actuator/ matrix interface flaws because voids can be of significant size, relative to wires; (3) relatively high rates of breakage of actuators during curing of matrix materials because of sensitivity to stress concentrations at mechanical restraints; and (4) difficulty of achieving desirable overall volume fractions of SMA wires when trying to optimize the integration of the wires by placing them in selected layers only

Mechanical properties of geopolymer concretes reinforced with waste steel fibers

The article presents the research that try to determinate the possibilities of utilization the waste came from used tires to create the composites based on geopolymer matrix. The tire is multicomponent construction. It mainly consists of elastomer (rubber), metal and textile fibres such called textile cord. A lot of components causes difficulties in the tire recycling process. The main aim of the research was determinate the possibilities of recycling the waste steel from used tires in geopolymer composites and develop the eco-friendly material for construction industry. The matrix based on fly ash from power station located in city named Skawina (Poland) and fine sand at a ratio of 1:1. The process of activation was made by 10M sodium hydroxide solution combined with the sodium silicate solution. In order to manufacture these composites the addition of 2% and 3.5% of waste steel fibres by mass was applied. Also specimen without steel fiber reinforcement were made to get reference specimens. The waste steel fibres came from recycling company from Argentina - 'Regomax'. The specimens were prepared according to the methodology described in the standard EN 12390-1. The research methods used were: microstructure research, tensile strength and compressive strength tests as well as analysis of breakthroughs.Fil: Gailitis, R. Riga Technical University; LetoniaFil: Korniejenko, K. Cracow University Of Technology; PoloniaFil: Lach, M. Riga Technical University; LetoniaFil: Sliseris, J. Riga Technical University; LetoniaFil: Moran, Juan Ignacio. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Rodriguez, Exequiel Santos. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Mikula, J. Cracow University Of Technology; Poloni

Weak radiative hyperon decays, Hara's theorem and the diquark

Weak radiative hyperon decays are discussed in the diquark-level approach. It is pointed out that in the general diquark formalism one may reproduce the experimentally suggested pattern of asymmetries, while maintaining Hara's theorem in the SU(3) limit. At present, however, no detailed quark-based model of parity-violating diquark-photon coupling exists that would have the necessary properties.Comment: 10 pages, LaTe

Report from the hyperon physics subgroup

A number of topics were considered in the Hyperon Group. As the time was reasonably short, and the group was not large, the list of topics is by no means exhaustive. The topics discussed should rather be considered a sampling of a much more extensive list of topics that might have been discussed. This report will thus consist of some brief remarks relevant to the topics discussed, and a few concluding remarks. The interested reader is referred to the reference for appropriate details.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87609/2/160_1.pd