Rubbery nanofibers by co-electrospinning of almost immiscible NBR and PCL blends

The paper presents a simple method for producing rubbery nanofibers without additional crosslinking required. Electrospinning's fast solvent evaporation is able to induce in liquid NBR/PCL pairs thermoplastic elastomeric (TPE) structure that holds stable over time without any further processing. The slight relative solubility of the polymers pair promotes a homogeneous blend formation with low Tg regions of blended NBR/PCL, avoiding phase separation. Such nanofibers show also a PCL-like crystal phase that is surprisingly higher than plain PCL nanofibrous counterpart and seemingly promoted by NBR/PCL interaction at molecular scale. The obtained nanofibrous-TPE morphology is reproducible, stable with time up to at least two years and is detected in a wide range of blend compositions (up to 80%wt NBR). Such a morphology reflects in good mechanical properties, which are analysed with a fitting model taking into account nanofibrous structure. Its impressive fitting ability helps interpretation of tensile tests behavior, carried out via normalization of force data with respect to sample mass, highlighting the contribution of liquid rubber in improving both elastic modulus and properties at failure. Such rubbery nanofibers represent a cost-effective powerful tool for the production of advanced self-damping composite materials with improved overall mechanical properties

Evaluation of the first automated thyroglobulin assay

The aim of this study was to investigate technical and analytical performance of the first automated thyroglobulin (Tg) assay (DPC-Immulite(R); Diagnostic Products Corporation, Los Angeles, USA). In imprecision studies using several human serum pools ranging from 21 to 58 replicates, a coefficient of variation of 9.0 % was obtained at a mean Tg concentration of 0.84 ng/ml and of 6.1 % at a Tg concentration of 62.1 ng/ml. In a method comparison with a non-automated assay (BRAHMS LUMItest Tg(R), BRAHMS, Berlin, Germany) using 383 sera of 303 patients with thyroid carcinoma, regression analysis according to Passing and Bablock yielded in the following equation: Immulite Tg=1.6 x BRAHMS Tg - 0.1 ng/ml (Pearson's r=0.979). Sera obtained from 59 patients with thyroid carcinoma enabled comparative follow-up studies; in all cases qualitative agreement was found with regard to increase or decrease of serum Tg; in eight cases, however, Tg was detected with the Immulite assay but not with the BRAHMS assay. Further follow-up proved the presence of thyroid tissue in these patients. From these and further methodological data (dilution linearity, interference studies, carry-over study, high-dose hook properties, and short report time) it is concluded that the DPC-Immulite Tg assay meets the requirements of routine diagnostic use

A Thermoplastic Elastomeric Nanofibrous Membrane as CFRP Modifier to Boost Both Delamination and Damping Performance

In the present work, thermoplastic elastomeric nanofibers made up of a homogenous blend of nitrile butadiene rubber (NBR) and Ppolycaprolactone (CL), with 80% wt of rubbery component, are used to modify a carbon fiber reinforced polymer (CFRP) laminate with the aim of improving its delamination and damping behavior at the same time. Since the nanofibrous membrane is not chemically cross-linked, the fibrous morphology is lost during composite curing owing to its melting. Nonetheless, the nanomodified CFRP displays an impressive ability to improve the delamination resistance in mode I and also an enhanced damping capacity at low temperature. The use of nanofibrous membranes allows for modification of specifically selected areas, thus maximizing the toughening and damping behavior where most required, without necessarily affecting the whole bulk of the resin. Both PCL and NBR components contribute to the final performance; however, the very high amount of rubber leads to a membrane difficult to handle whose final performance in CFRP modification is not superior to membranes up to 60% wt NBR that are instead more stable and easier to deal with. Overall, the proposed results are nonetheless very promising, taking into account also that the improved delamination resistance in mode I and enhanced damping are obtained without significantly sacrificing the weight and overall dimension of the obtained composite

Polyamide Nanofibers Impregnated with Nitrile Rubber for Enhancing CFRP Delamination Resistance

Delamination is the main responsible for structural failure of composites having a laminar structure. In the present work, polyamide (Nylon 66) nanofibers, even impregnated with uncrosslinked nitrile butadiene rubber (NBR), are interleaved into epoxy-based carbon fiber reinforced polymer (CFRP) laminates with the aim to counteract the delamination phenomenon. The performance of nano-modified composites using both the nanofibrous mat types, that is, Nylon 66 and NBR-impregnated Nylon 66 membranes, is investigated. Mode I loading tests show a significant improvement of the interlaminar fracture toughness of rubber-modified CFRPs, especially in the G(I,)(R) (up to +151%). The improvement in the G(I,)(C) is less pronounced, but still significant (up to +80%). The achieved results are very encouraging and pave the way to the use of such Nylon-NBR hybrid mats for hindering delamination

Toward CP-even Neutrino Beam

The best method of measuring CP violating effect in neutrino oscillation experiments is to construct and use a neutrino beam made of an ideal mixture of $\bar{\nu}_e$ and $\nu_e$ of monochromatic lines. The conceptual design of such a beam is described, together with how to measure the CP-odd quantity. We propose to exploit an accelerated unstable hydrogen-like heavy ion in a storage ring, whose decay has both electron capture and bound beta decay with a comparable fraction.Comment: 6 pages, 2 figures, Published versio

A New Wood Surface Flame-Retardant Based on Poly-m-Aramid Electrospun Nanofibers

Poly(meta-phenylene isophtalamide) (PMIA) was processed via electrospinning to provide nanofibrous membranes with randomly and aligned fibers. Mechanical performance of such membranes was evaluated, applying a normalization procedure that takes into account the peculiar morphology of such complex substrate where voids can sum up to almost 80% of the sample volume. Random and aligned fibers membranes are applied onto wood panels to test their fire resistance in cone calorimetry when coated in polyaramidic thin nanofiber mats. Tests highlighted that random fibers provide a better fire protection, increasing Time to Ignition and decreasing the Fire Performance Index. Another important parameter affecting the performance is the adhesive system used to apply the nanofibers onto wood that is able to significantly modify the fire performance of the polyaramidic-coated wood panels. POLYM. ENG. SCI., 2019. (c) 2019 Society of Plastics Engineer

Linear regression models and k-means clustering for statistical analysis of fNIRS data

We propose a new algorithm, based on a linear regression model, to statistically estimate the hemodynamic activations in fNIRS data sets. The main concern guiding the algorithm development was the minimization of assumptions and approximations made on the data set for the application of statistical tests. Further, we propose a K-means method to cluster fNIRS data (i.e. channels) as activated or not activated. The methods were validated both on simulated and in vivo fNIRS data. A time domain (TD) fNIRS technique was preferred because of its high performances in discriminating cortical activation and superficial physiological changes. However, the proposed method is also applicable to continuous wave or frequency domain fNIRS data sets

Is Graphene Always Effective in Reinforcing Composites? The Case of Highly Graphene-Modified Thermoplastic Nanofibers and Their Unfortunate Application in CFRP Laminates

Graphene (G) can effectively enhance polymers’ and polymer composites’ electric, thermal, and mechanical properties. Nanofibrous mats have been demonstrated to significantly increase the interlaminar fracture toughness of composite laminates, hindering delamination and, consequently, making such materials safer and more sustainable thanks to increased service life. In the present paper, poly(ethylene oxide) (PEO), polycaprolactone (PCL), and Nylon 66 nanofibers, plain or reinforced with G, were integrated into epoxy-matrix Carbon Fiber Reinforced Polymers (CFRPs) to evaluate the effect of polymers and polymers + G on the laminate mechanical properties. The main aim of this work is to compare the reinforcing action of the different nanofibers (polyether, polyester, and polyamide) and to disclose the effect of G addition. The polymers were chosen considering their thermal properties and, consequently, their mechanism of action against delamination. PEO and PCL, displaying a low melting temperature, melt, and mix during the curing cycle, act via matrix toughening; in this context, they are also used as tools to deploy G specifically in the interlaminar region when melting and mixing with epoxy resin. The high extent of modification stems from an attempt to deploy it in the interlaminar layer, thus diluting further in the resin. In contrast, Nylon 66 does not melt and maintain the nanostructure, allowing laminate toughening via nanofiber bridging. The flexural properties of the nanomodifed CFRPs were determined via a three-point bending (3PB) test, while delamination behavior in Mode I and Mode II was carried out using Double Cantilever Beam (DCB) and End-Notched Flexture (ENF) tests, respectively. The lack of a positive contribution of G in this context is an interesting point to raise in the field of nanoreinforced CFRP

New Application Field of Polyethylene Oxide: PEO Nanofibers as Epoxy Toughener for Effective CFRP Delamination Resistance Improvement

Delamination is the most severe weakness affecting all composite materials with a laminar structure. Nanofibrous mat interleaving is a smart way to increase the interlaminar fracture toughness: the use of thermoplastic polymers, such as poly(ϵ-caprolactone) and polyamides (Nylons), as nonwovens is common and well established. Here, electrospun polyethylene oxide (PEO) nanofibers are proposed as reinforcing layers for hindering delamination in epoxy-based carbon fiber-reinforced polymer (CFRP) laminates. While PEO nanofibers are well known and successfully applied in medicine and healthcare, to date, their use as composite tougheners is undiscovered, resulting in the first investigation in this application field. The PEO-modified CFRP laminate shows a significant improvement in the interlaminar fracture toughness under Mode I loading: +60% and +221% in GI,Cand GI,R, respectively. The high matrix toughening is confirmed by the crack path analysis, showing multiple crack planes, and by the delamination surfaces, revealing that extensive phase separation phenomena occur. Under Mode II loading, the GIIenhancement is almost 20%. Despite a widespread phase separation occurring upon composite curing, washings in water do not affect the surface delamination morphology, suggesting a sufficient humidity resistance of the PEO-modified laminate. Moreover, it almost maintains both the original stiffness and glass transition temperature (Tg), as assessed via three-point bending and dynamic mechanical analysis tests. The achieved results pave the way for using PEO nanofibrous membranes as a new effective solution for hindering delamination in epoxy-based composite laminates