Caracterização de danos causados por Anastrepha fraterculus (Wiedemann) (Diptera, Tephritidae) e desenvolvimento larval em frutos de duas cultivares de quivizeiro (Actinidia spp.)

Os danos causados por A. fraterculus em três estágios de maturação de frutos de quivizeiro foram avaliados em pomar comercial, e, em laboratório, o desenvolvimento larval da espécie foi estudado, nas cultivares MG06 e Bruno. Frutos das duas cultivares foram infestados com A. fraterculus, em pomar comercial localizado em Farroupilha-RS, no início (30% do tamanho final), metade (90% do tamanho final) e final (ponto de colheita) do ciclo de desenvolvimento, e, em laboratório, desde o início da frutificação até a colheita. Na cultivar MG06, três dias após a primeira infestação, observou-se a formação de exsudato cristalino nos locais de punctura que evolui, na colheita, para rachaduras, depressões e primórdios de galerias nos frutos. Na mesma cultivar, registrou-se fibrose nos frutos infestados no fim do ciclo (ponto de colheita). Apesar de terem sidos computados ovos nos frutos, a campo não houve desenvolvimento larval nessa cultivar. Na Bruno, não foram constatados danos e ovos, indicando a imunidade da cultivar. Não houve queda de frutos atribuída a A. fraterculus nas duas cultivares. Verificou-se o desenvolvimento larval, em laboratório, quando os frutos apresentavam, no mínimo, 6,4% e 7,0% de sólidos solúveis totais, respectivamente, para as cultivares MG06 e Bruno

Avaliação da mortalidade através do contato de machos de Grapholita molesta (Lepidoptera, Tortricidae) com o produto Splat Cida Grafo Bona.

Este trabalho teve como objetivo avaliar a mortalidade de machos de Grapholita molesta por contato com o Splat Cida Grafo Bona

Avaliação do raio de ação de armadilha Delta iscada com o feromônio sexual sintético de Grapholita molesta (Lepidoptera, Tortricidae), em pomares de pessegueiro.

Neste trabalho foi determinado o raio de ação do atrativo sexual de G. molesta (Iscalure Grapholita® ISCA Tecnologias) em armadilhas Delta, em pomares de pessegueiro

A meteorological–hydrological regional ensemble forecast for an early-warning system over small Apennine catchments in Central Italy

Abstract. The weather forecasts for precipitation have considerably improved in recent years thanks to the increase of computational power. This allows for the use of both a higher spatial resolution and the parameterization schemes specifically developed for representing sub-grid scale physical processes at high resolution. However, precipitation estimation is still affected by errors that can impact the response of hydrological models. To the aim of improving the hydrological forecast and the characterization of related uncertainties, a regional-scale meteorological–hydrological ensemble is presented. The uncertainties in the precipitation forecast and how they propagate in the hydrological model are also investigated. A meteorological–hydrological offline coupled ensemble is built to forecast events in a complex-orography terrain where catchments of different sizes are present. The Best Discharge-based Drainage (BDD; both deterministic and probabilistic) index, is defined with the aim of forecasting hydrological-stress conditions and related uncertainty. In this context, the meteorological–hydrological ensemble forecast is implemented and tested for a severe hydrological event which occurred over Central Italy on 15 November 2017, when a flood hit the Abruzzo region with precipitation reaching 200 mm (24 h)−1 and producing damages with a high impact on social and economic activities. The newly developed meteorological–hydrological ensemble is compared with a high-resolution deterministic forecast and with the observations (rain gauges and radar data) over the same area. The receiver operating characteristic (ROC) statistical indicator shows how skilful the ensemble precipitation forecast is with respect to both rain-gauge- and radar-retrieved precipitation. Moreover, both the deterministic and probabilistic configurations of the BDD index are compared with the alert map issued by Civil Protection Department for the event showing a very good agreement. Finally, the meteorological–hydrological ensemble allows for an estimation of both the predictability of the event a few days in advance and the uncertainty of the flood. Although the modelling framework is implemented on the basins of the Abruzzo region, it is portable and applicable to other areas

Beam halo dynamics and control with hollow electron beams

Experimental measurements of beam halo diffusion dynamics with collimator scans are reviewed. The concept of halo control with a hollow electron beam collimator, its demonstration at the Tevatron, and its possible applications at the LHC are discussed.Comment: 5 pages, 4 figures, in Proceedings of the 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB2012), Beijing, China, 17-21 September 201

Experimental results of crystal-assisted slow extraction at the SPS

The possibility of extracting highly energetic particles from the Super Proton Synchrotron (SPS) by means of silicon bent crystals has been explored since the 1990's. The channelling effect of a bent crystal can be used to strongly deflect primary protons and eject them from the synchrotron. Many studies and experiments have been carried out to investigate crystal channelling effects. The extraction of 120 and 270 GeV proton beams has already been demonstrated in the SPS with dedicated experiments located in the ring. Presently in the SPS, the UA9 experiment is performing studies to evaluate the possibility to use bent silicon crystals to steer particle beams in high energy accelerators. Recent studies on the feasibility of extraction from the SPS have been made using the UA9 infrastructure with a longer-term view of using crystals to help mitigate slow extraction induced activation of the SPS. In this paper, the possibility to eject particles into the extraction channel in LSS2 using the bent crystals already installed in the SPS is presented. Details of the concept, simulations and measurements carried out with beam are presented, before the outlook for the future is discussed.Comment: 4 pages, 7 figures, submitted to to International Particle Accelerator Conference (IPAC) 2017 in Copenhagen, Denmar

Beam Halo on the LHC TCDQ Diluter System and Thermal Load on the Downstream Superconducting Magnets

The moveable single-jawed graphite TCDQ diluter must be positioned very close to the circulating LHC beam in order to prevent damage to downstream components in the event of an unsynchronised beam abort. A two-jawed graphite TCS.IR6 collimator forms part of the TCDQ system. The requirement to place the jaws close to the beam means that the system can intercept a substantial beam halo load. Initial investigations indicated a worryingly high heat load on the Q4 coils. This paper presents the updated load cases, shielding and simulation geometry, and the results of simulations of the energy deposition in the TCDQ system and in the downstream superconducting Q4 magnet. The implications for the operation of the LHC are discussed

Unexpected frequency of genomic alterations in histologically normal colonic tissue from colon cancer patients

As shown by genomic studies, colorectal cancer (CRC) is a highly heterogeneous disease, where copy number alterations (CNAs) may greatly vary among different patients. To explore whether CNAs may be present also in histologically normal tissues from patients affected by CRC, we performed CGH + SNP Microarray on 15 paired tumoral and normal samples. Here, we report for the first time the occurrence of CNAs as a common feature of the histologically normal tissue from CRC patients, particularly CNAs affecting different oncogenes and tumor-suppressor genes, including some not previously reported in CRC and others known as being involved in tumor progression. Moreover, from the comparison of normal vs paired tumoral tissue, we were able to identify three groups: samples with an increased number of CNAs in tumoral vs normal tissue, samples with a similar number of CNAs in both tissues, and samples with a decrease of CNAs in tumoral vs normal tissue, which may be likely due to a selection of the cell population within the tumor. In conclusion, our approach allowed us to uncover for the first time an unexpected frequency of genetic alteration in normal tissue, suggesting that tumorigenic genetic lesions are already present in histologically normal colonic tissue and that the use in array comparative genomic hybridization (CGH) studies of normal samples as reference for the paired tumors can lead to misrepresented genomic data, which may be incomplete or limited, especially if used for the research of target molecules for personalized therapy and for the possible correlation with clinical outcome

Operational Experience with First Circulating Beam in the LHC

Following a series of injection tests, the first attempts to pass beam around both directions of the LHC were successful and led rapidly to circulating beam in the counter clockwise direction (beam 2) and many turns of beam 1. Unfortunately the beam commissioning was curtailed by the incident in sector 34. However, measurements performed during this first commissioning period showed that the magnet model of the machine had delivered optics close to nominal and also very good performance of beam instrumentation and supporting software. Details of the machine set-up and the commissioning procedures are given. The measurements performed and the key results from this period are described

The LHC Injection Tests

A series of LHC injection tests was performed in August and September 2008. The first saw beam injected into sector 23; the second into sectors 78 and 23; the third into sectors 78-67 and sectors 23-34-45. The fourth, into sectors 23-34-45, was performed the evening before the extended injection test on the 10th September which saw both beams brought around the full circumference of the LHC. The tests enabled the testing and debugging of a number of critical control and hardware systems; testing and validation of instrumentation with beam for the first time; deployment, and validation of a number of measurement procedures. Beam based measurements revealed a number of machine configuration issues that were rapidly resolved. The tests were undoubtedly an essential precursor to the successful start of LHC beam commissioning. This paper provides an outline of preparation for the tests, the machine configuration and summarizes the measurements made and individual system performance