15,333 research outputs found
The effects of high-temperature brazing and thermal cycling on the mechanical properties of Hastelloy X
Data are presented on the effects of brazing alloy, brazing operation, thermal cycling, and combinations of these on the yield strength, elongation, tensile strength, and fatigue life of thin gage Hastelloy X. These data show that brazing at 1461 K (2170 F) with a Ni-Pd-Au alloy and subsequent exposure to 200 service thermal cycles between 533 and 1144 K (500 and 1600 F) result in reduction of as much as 39 percent in yield strength, 33 percent in elongation, 14 percent in tensile strength, and 26 percent in fatigue limit of Hastelloy X, as compared to as-received materials. These property losses are primarily caused by the brazing operation rather than the subsequent service thermal cycles
Experimental land observing data system feasibility study
An end-to-end data system to support a Shuttle-based Multispectral Linear Array (MLA) mission in the mid-1980's was defined. The experimental Land Observing System (ELOS) is discussed. A ground system that exploits extensive assets from the LANDSAT-D Program to effectively meet the objectives of the ELOS Mission was defined. The goal of 10 meter pixel precision, the variety of data acquisition capabilities, and the use of Shuttle are key to the mission requirements, Ground mission management functions are met through the use of GSFC's Multi-Satellite Operations Control Center (MSOCC). The MLA Image Generation Facility (MIGF) combines major hardware elements from the Applications Development Data System (ADDS) facility and LANDSAT Assessment System (LAS) with a special purpose MLA interface unit. LANDSAT-D image processing techniques, adapted to MLA characteristics, form the basis for the use of existing software and the definition of new software required
One-step dual purpose joining technique
This fastener used in induction heating is a wire screen basically of an eddy current carrying material such as carbon steel. Selected wires in the screen are copper, sheathed in an insulating material. The screen is placed between two sheets of thermoplastics. When inductively heated, the composite softens and flows around the apertures of the screen. After this heating and joining, the copper wires may be used to conduct electricity
Asymmetric Dark Matter and Effective Operators
In order to annihilate in the early Universe to levels well below the
measured dark matter density, asymmetric dark matter must possess large
couplings to the Standard Model. In this paper, we consider effective operators
which allow asymmetric dark matter to annihilate into quarks. In addition to a
bound from requiring sufficient annihilation, the energy scale of such
operators can be constrained by limits from direct detection and monojet
searches at colliders. We show that the allowed parameter space for these
operators is highly constrained, leading to non-trivial requirements that any
model of asymmetric dark matter must satisfy.Comment: 6 pages, 1 figure. V2 replacement: Citations added. Shading error in
Fig. 1 (L_FV panel) corrected. Addition of direct detection bounds on m_chi
<5 GeV added, minor alterations in text to reflect these change
Electrical Tuning of Single Nitrogen-Vacancy Center Optical Transitions Enhanced by Photoinduced Fields
We demonstrate precise control over the zero-phonon optical transition
energies of individual nitrogen-vacancy (NV) centers in diamond by applying
multiaxis electric fields, via the dc Stark effect. The Stark shifts display
surprising asymmetries that we attribute to an enhancement and rectification of
the local electric field by photoionized charge traps in the diamond. Using
this effect, we tune the excited-state orbitals of strained NV centers to
degeneracy and vary the resulting degenerate optical transition frequency by
>10 GHz, a scale comparable to the inhomogeneous frequency distribution. This
technique will facilitate the integration of NV-center spins within photonic
networks.Comment: 10 pages, 6 figure
Motorcycle Safety Research Project: Interim Summary Report Research Deliverable 1: Investigate and Develop a Pre-Learner Motorcycle Licensing Package
Motorcycle trauma is a serious road safety issue in Queensland and throughout Australia. In 2009, Queensland Transport (later Transport and Main Roads or TMR) appointed CARRS-Q to provide a three-year program of Road Safety Research Services for Motorcycle Rider Safety. Funding for this research originated from the Motor Accident Insurance Commission. This program of research was undertaken to produce knowledge to assist TMR to improve motorcycle safety by further strengthening the licensing and training system to make learner riders safer by developing a pre-learner package (Deliverable 1 which is the focus of this report), and by evaluating the Q-Ride CAP program to ensure that it is maximally effective and contributes to the best possible training for new riders (Deliverable 2), which is the focus of this report. Deliverable 3 of the program identified potential new licensing components that will reduce the incidence of risky riding and improve higher-order cognitive skills in new riders. While fatality and injury rates for learner car drivers are typically lower than for those with intermediate licences, this pattern is not found for learner motorcycle riders. Learner riders cannot be supervised as effectively as learner car drivers and errors are more likely to result in injury for learner riders than learner drivers. It is therefore imperative to improve safety for learner riders. Deliverable 1 examines the potential for improving the motorcycle learner and licence scheme by introducing a pre-learner motorcycle licensing and training scheme within Queensland. The tasks undertaken for Deliverable 1 were a literature review, analysis of learner motorcyclist crash and licensing data, and the development of a potential pre-learner motorcycle rider program
Dark Matter and Dark Radiation
We explore the feasibility and astrophysical consequences of a new long-range
U(1) gauge field ("dark electromagnetism") that couples only to dark matter,
not to the Standard Model. The dark matter consists of an equal number of
positive and negative charges under the new force, but annihilations are
suppressed if the dark matter mass is sufficiently high and the dark
fine-structure constant is sufficiently small. The correct relic
abundance can be obtained if the dark matter also couples to the conventional
weak interactions, and we verify that this is consistent with particle-physics
constraints. The primary limit on comes from the demand that the
dark matter be effectively collisionless in galactic dynamics, which implies
for TeV-scale dark matter. These values are
easily compatible with constraints from structure formation and primordial
nucleosynthesis. We raise the prospect of interesting new plasma effects in
dark matter dynamics, which remain to be explored.Comment: 14 pages, 6 figures Updated equations and figure
Minute-of-Arc Resolution Gamma ray Imaging Experiment—MARGIE
MARGIE (Minute-of-Arc Resolution Gamma-ray Imaging Experiment) is a large area(∼104 cm2), wide field-of-view (∼1 sr), hard X-ray/gamma-ray (∼20–600 keV) coded-mask imaging telescope capable of performing a sensitive survey of both steady and transient cosmic sources. MARGIE has been selected for a NASA mission-concept study for an Ultra Long Duration (100 day) Balloon flight. We describe our program to develop the instrument based on new detector technology of either cadmium zinc telluride (CZT) semiconductors or pixellated cesium iodide (CsI) scintillators viewed by fast-timing bi-directional charge-coupled devices (CCDs). The primary scientific objectives are to image faint Gamma-Ray Bursts (GRBs) in near-real-time at the low intensity (high-redshift) end of the logN-logS distribution, thereby extending the sensitivity of present observations, and to perform a wide field survey of the Galactic plane
- …