Effect of corrosion degradation on failure mechanisms of aluminium/steel clinched joints

The effect of corrosion phenomena in critical environmental conditions on the mechanical performance of steel/aluminium hybrid joints, obtained by clinching technique, was studied by ageing in salt spray environment. The investigation was carried out on asymmetrical joints with total thickness of 2.5 mm. The joint strength at varying ageing time was determined by means of single lap shear tests.The experimental results have shown that corrosion degradation phenomena significantly affect the performance and failure mechanisms of the joints, causing premature failure of the joint at very low stress level.Moreover, it was observed that the joint geometry characterized by thicker aluminium foil, had good durability properties showing acceptable mechanical properties even at long ageing times. The fracture modes have been analysed in all the above-mentioned conditions and a failure map, at increasing ageing time, for the two joint geometries has been proposed. Keywords: Clinched joints, Durability, Corrosion, Single lap shear test, Failure ma

Assessment of ageing effect on the mechanical behaviour of steel/aluminium self-piercing riveted joint

Self-piercing riveting (SPR) is a new performing technology able to joint several kinds of metal and non-metal supports together. The combined effect of joint configuration and environmental conditions could have detrimental effect on the ageing effect on mechanical behaviour of dissimilar metal SPR joints. The joining of dissimilar materials, such as steel and aluminium, realized by self-piercing riveting (SPR) technique was studied to evaluate the ageing effects on its mechanical behaviour in critical environmental conditions. The investigation was carried out on symmetrical or unsymmetrical joints at varying total thicknesses (i.e. 2.0, 2.5 and 3.0 mm). The joint resistance was determined by single-lap shear tests. A design of experiment (DoE) has been performed by using Minitab® followed by the statistical analysis (ANOVA) of the experimental data. Long-term ageing tests in salt spray environment were performed to evaluate the durability of the mechanical joint. The experimental results evidenced that the corrosion degradation phenomena influenced significantly both the performance and failure mechanisms of the joints; also, the joint configuration is a significant factor for the corrosion effect. In the salt spray, the aluminium sheet undergoes a noticeable degradation due to galvanic Al/Fe corrosion. The set characterized by thinner aluminium sheet evidenced a gradual reduction of the mechanical strength with increasing ageing time due to the prevalence of thinning induced by aluminium corrosion. Instead, for S10-A15 samples (characterized by a thicker thickness of aluminium sheet) during the first 7 weeks, stable mechanical performances were observed. The experimental results evidenced that the corrosion degradation phenomena influence significantly both performances and failure mechanisms of SPR joints. Furthermore, the durability of the SPR joint is strongly affected by the joint configuration, and the best results were observed in the unsymmetrical joint with thicker aluminium sheet

Precision measurements of the top quark mass from the Tevatron in the pre-LHC era

The top quark is the heaviest of the six quarks of the Standard Model. Precise knowledge of its mass is important for imposing constraints on a number of physics processes, including interactions of the as yet unobserved Higgs boson. The Higgs boson is the only missing particle of the Standard Model, central to the electroweak symmetry breaking mechanism and generation of particle masses. In this Review, experimental measurements of the top quark mass accomplished at the Tevatron, a proton-antiproton collider located at the Fermi National Accelerator Laboratory, are described. Topologies of top quark events and methods used to separate signal events from background sources are discussed. Data analysis techniques used to extract information about the top mass value are reviewed. The combination of several most precise measurements performed with the two Tevatron particle detectors, CDF and \D0, yields a value of \Mt = 173.2 \pm 0.9 GeV/$c^2$.Comment: This version contains the most up-to-date top quark mass averag

Determination of the Jet Energy Scale at the Collider Detector at Fermilab

A precise determination of the energy scale of jets at the Collider Detector at Fermilab at the Tevatron $p\bar{p}$ collider is described. Jets are used in many analyses to estimate the energies of partons resulting from the underlying physics process. Several correction factors are developed to estimate the original parton energy from the observed jet energy in the calorimeter. The jet energy response is compared between data and Monte Carlo simulation for various physics processes, and systematic uncertainties on the jet energy scale are determined. For jets with transverse momenta above 50 GeV the jet energy scale is determined with a 3% systematic uncertainty

Search for Chargino-Neutralino Associated Production at the Fermilab Tevatron Collider

We have searched in $p \bar{p}$ collisions at $\sqrt{s}$ = 1.8 TeV for events with three charged leptons and missing transverse energy. In the Minimal Supersymmetric Standard Model, we expect trilepton events from chargino-neutralino (\chione \chitwo) pair production, with subsequent decay into leptons. We observe no candidate $e^+e^-e^\pm$, $e^+e^-\mu^\pm$, $e^\pm\mu^+\mu^-$ or $\mu^+\mu^-\mu^\pm$ events in 106 pb$^{-1}$ integrated luminosity. We present limits on the sum of the branching ratios times cross section for the four channels: \sigma_{\chione\chitwo}\cdot BR(\chione\chitwo\to 3\ell+X) 81.5 \mgev\sp and M_\chitwo > 82.2 \mgev\sp for $\tan\beta=2$, $\mu =-600$~\mgev\sp and M_\squark= M_\gluino.Comment: 9 pages and 3 figure

Measurement of the lepton charge asymmetry in W-boson decays produced in p-pbar collisions

We describe a measurement of the charge asymmetry of leptons from W boson decays in the rapidity range 0 enu, munu events from 110+/-7 pb^{-1}of data collected by the CDF detector during 1992-95. The asymmetry data constrain the ratio of d and u quark momentum distributions in the proton over the x range of 0.006 to 0.34 at Q2 \approx M_W^2. The asymmetry predictions that use parton distribution functions obtained from previously published CDF data in the central rapidity region (0.0<|y_l|<1.1) do not agree with the new data in the large rapidity region (|y_l|>1.1).Comment: 13 pages, 3 tables, 1 figur

Search for New Particles Decaying to Dijets at CDF

We have used 106 pb^-1 of data collected with the Collider Detector at Fermilab to search for new particles decaying to dijets. We exclude at the 95% confidence level models containing the following new particles: axigluons and flavor universal colorons with mass between 200 and 980 GeV/c, excited quarks with mass between 80 and 570 GeV/c^2 and between 580 and 760 GeV/c^2, color octet technirhos with mass between 260 and 480 GeV/c^2, W' bosons with mass between 300 and 420 GeV/c^2, and E_6 diquarks with mass between 290 and 420 GeV/c^2.Comment: 18 pages, 4 figures, 1 table. Submitted to Physical Review D Rapid Communications. Postscript file of paper is also available at http://www-cdf.fnal.gov/physics/pub97/cdf3276_dijet_search_prd_rc.p

Measurement of Rapidity Distribution for High Mass Drell-Yan ee Pairs at CDF

We report on the first measurement of the rapidity distribution dsigma/dy over nearly the entire kinematic region of rapidity for e^+e^- pairs in the Z-boson region of 66116 GeV/c^2. The data sample consists of 108 pb^{-1} of ppbar collisions at \sqrt{s}=1.8 TeV taken by the Collider Detector at Fermilab during 1992--1995. The total cross section in the $Z$-boson region is measured to be 252 +- 11 pb. The measured total cross section and d\sigma/dy are compared with quantum chromodynamics calculations in leading and higher orders.Comment: 7 pages, 3 figures. Submitted to Physical Review Letter

Search for Narrow Diphoton Resonances and for gamma-gamma+W/Z Signatures in p\bar p Collisions at sqrt(s)=1.8 TeV

We present results of searches for diphoton resonances produced both inclusively and also in association with a vector boson (W or Z) using 100 pb^{-1} of p\bar p collisions using the CDF detector. We set upper limits on the product of cross section times branching ratio for both p\bar p\to\gamma\gamma + X and p\bar p\to\gamma\gamma + W/Z. Comparing the inclusive production to the expectations from heavy sgoldstinos we derive limits on the supersymmetry-breaking scale sqrt{F} in the TeV range, depending on the sgoldstino mass and the choice of other parameters. Also, using a NLO prediction for the associated production of a Higgs boson with a W or Z boson, we set an upper limit on the branching ratio for H\to\gamma\gamma. Finally, we set a lower limit on the mass of a `bosophilic' Higgs boson (e.g. one which couples only to \gamma, W, and Z$ bosons with standard model couplings) of 82 GeV/c^2 at 95% confidence level.Comment: 30 pages, 11 figure

Measurement of the Helicity of W Bosons in Top Quark Decays

We use the transverse momentum spectrum of leptons in the decay chain t-->bW with W-->l nu to measure the helicity of the W bosons in the top quark rest frame. Our measurement uses a ttbar sample isolated in 106 +/- 4 inverse picobarns of data collected in ppbar collisions at sqrt(s)=1.8 TeV with the CDF detector at the Fermilab Tevatron. Assuming a standard V--A weak decay, we find that the fraction of W's with zero helicity in the top rest frame is F_0 = 0.91 +/- 0.37 (stat) +/- 0.13 (syst), consistent with the standard model prediction of F_0=0.70 for a top mass of 175 GeV/c**2.Comment: Submitted to PRL. 8 pages, 2 figure