137 research outputs found
Probabilistic seismic hazard assessment in Greece – Part 3: Deaggregation
The present third part of the study, concerning the evaluation of earthquake hazard in Greece in terms of various ground motion parameters, deals with the deaggregation of the obtained results The seismic hazard maps presented for peak ground acceleration and spectral acceleration at 0.2 s and 1.0 s, with 10% probability of exceedance in 50 years, were deaggregated in order to quantify the dominant scenario. There are three basic components of each dominant scenario: earthquake magnitude (<i>M</i>), source-to-site distance (<i>R</i>) and epsilon (ε). We present deaggregation maps of mean and mode values of M-R-&epsilon; triplet showing the contribution to hazard over a dense grid
Probabilistic seismic hazard assessment in Greece – Part 2: Acceleration response spectra and elastic input energy spectra
This second part of the study, deals with the evaluation of the earthquake hazard in Greece in terms of the response spectral acceleration and the elastic input energy equivalent velocity. Four sets of predictive equations were selected, two for each type of spectra. Probabilistic hazard maps were created by determining the seismic hazard at grid points covering the region of interest. The maps are presented for the dominant periods of 0.2 s and 1.0 s for each spectrum. Uniform hazard response spectra (UHRS) for six cities located in the regions of highest estimated hazard are also presented. The comparison with elastic design spectra proposed by the latest national building code, has shown that the UHRS values exceed the design values at almost all periods
A smoothed stochastic earthquake rate model considering seismicity and fault moment release for Europe
We present a time-independent gridded earthquake rate forecast for the European region including Turkey. The spatial component of our model is based on kernel density estimation techniques, which we applied to both past earthquake locations and fault moment release on mapped crustal faults and subduction zone interfaces with assigned slip rates. Our forecast relies on the assumption that the locations of past seismicity is a good guide to future seismicity, and that future large-magnitude events occur more likely in the vicinity of known faults. We show that the optimal weighted sum of the corresponding two spatial densities depends on the magnitude range considered. The kernel bandwidths and density weighting function are optimized using retrospective likelihood-based forecast experiments. We computed earthquake activity rates (a- and b-value) of the truncated Gutenberg-Richter distribution separately for crustal and subduction seismicity based on a maximum likelihood approach that considers the spatial and temporal completeness history of the catalogue. The final annual rate of our forecast is purely driven by the maximum likelihood fit of activity rates to the catalogue data, whereas its spatial component incorporates contributions from both earthquake and fault moment-rate densities. Our model constitutes one branch of the earthquake source model logic tree of the 2013 European seismic hazard model released by the EU-FP7 project ‘Seismic HAzard haRmonization in Europe' (SHARE) and contributes to the assessment of epistemic uncertainties in earthquake activity rates. We performed retrospective and pseudo-prospective likelihood consistency tests to underline the reliability of our model and SHARE's area source model (ASM) using the testing algorithms applied in the collaboratory for the study of earthquake predictability (CSEP). We comparatively tested our model's forecasting skill against the ASM and find a statistically significant better performance for testing periods of 10-20yr. The testing results suggest that our model is a viable candidate model to serve for long-term forecasting on timescales of years to decades for the European regio
Probabilistic seismic hazard assessment in Greece – Part 1: Engineering ground motion parameters
Seismic hazard assessment represents a basic tool for rational planning and designing in seismic prone areas. In the present study, a probabilistic seismic hazard assessment in terms of peak ground acceleration, peak ground velocity, Arias intensity and cumulative absolute velocity computed with a 0.05 g acceleration threshold, has been carried out for Greece. The output of the hazard computation produced probabilistic hazard maps for all the above parameters estimated for a fixed return period of 475 years. From these maps the estimated values are reported for 52 Greek municipalities. Additionally, we have obtained a set of probabilistic maps of engineering significance: a probabilistic macroseismic intensity map, depicting the Modified Mercalli Intensity scale obtained from the estimated peak ground velocity and a probabilistic seismic-landslide map based on a simplified conversion of the estimated Arias intensity and peak ground acceleration into Newmark's displacement
Synthesis of Shape-Tailored WO3 Micro-/Nanocrystals and the Photocatalytic Activity of WO3/TiO2 Composites
A traditional semiconductor (WO3) was synthesized from different precursors via hydrothermal crystallization targeting the achievement of three different crystal shapes (nanoplates, nanorods and nanostars). The obtained WO3 microcrystals were analyzed by the means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and diffuse reflectance spectroscopy (DRS). These methods contributed to the detailed analysis of the crystal morphology and structural features. The synthesized bare WO3 photocatalysts were totally inactive, while the P25/WO3 composites were efficient under UV light radiation. Furthermore, the maximum achieved activity was even higher than the bare P25's photocatalytic performance. A correlation was established between the shape of the WO3 crystallites and the observed photocatalytic activity registered during the degradation of different substrates by using P25/WO3 composites
A subaqueous hazard map for earthquake-triggered landslides in Lake Zurich, Switzerland
The awareness of geohazards in the subaqueous environment has steadily increased in the past years and there is an increased need to assess these hazards in a quantitative sense. Prime examples are subaqueous landslides, which can be triggered by a number of processes including earthquakes or human activities, and which may impact offshore and onshore infrastructure and communities. In the literature, a plenitude of subaqueous landslide events are related to historical earthquakes, including cases from lakes in Switzerland. Here, we present an approach for a basin-wide earthquake-triggered subaquatic landslide hazard assessment for Lake Zurich, which is surrounded by a densely populated shoreline. Our analysis is based on high-resolution sediment-mechanical and geophysical input data. Slope stabilities are calculated with a grid-based limit equilibrium model on an infinite slope, which uses Monte Carlo sampled input data from a sediment- mechanical stratigraphy of the lateral slopes. Combined with probabilistic ground-shaking forecasts from a recent national seismic hazard analysis, subaquatic earthquake-triggered landslide hazard maps are constructed for different mean return periods, ranging from 475 to 9975 years. Our results provide a first quantitative landslide hazard estimation for the lateral slopes in Lake Zurich. Furthermore, a back-analysis of a case-study site indicates that pseudostatic accelerations in the range between 0.04 and 0.08 g were needed to trigger a well-investigated subaqueous landslide, dated to *2210 cal. years B.P
Accuracy of rapid radiographic film calibration for intensity‐modulated radiation therapy verification
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/135342/1/acm20086.pd
Analysis of variation in calibration curves for Kodak XV radiographic film using modelâ based parameters
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/135597/1/acm20222.pd
- …