64 research outputs found
Estimation of musculotendon parameters for scaled and subject specific musculoskeletal models using an optimization technique.
A challenging aspect of subject specific musculoskeletal modeling is the estimation of muscle parameters, especially optimal fiber length and tendon slack length. In this study, the method for scaling musculotendon parameters published by Winby et al. (2008), J. Biomech. 41, 1682-1688, has been reformulated, generalized and applied to two cases of practical interest: 1) the adjustment of muscle parameters in the entire lower limb following linear scaling of a generic model and 2) their estimation "from scratch" in a subject specific model of the hip joint created from medical images. In the first case, the procedure maintained the muscles׳ operating range between models with mean errors below 2.3% of the reference model normalized fiber length value. In the second case, a subject specific model of the hip joint was created using segmented bone geometries and muscle volumes publicly available for a cadaveric specimen from the Living Human Digital Library (LHDL). Estimated optimal fiber lengths were found to be consistent with those of a previously published dataset for all 27 considered muscle bundles except gracilis. However, computed tendon slack lengths differed from tendon lengths measured in the LHDL cadaver, suggesting that tendon slack length should be determined via optimization in subject-specific applications. Overall, the presented methodology could adjust the parameters of a scaled model and enabled the estimation of muscle parameters in newly created subject specific models. All data used in the analyses are of public domain and a tool implementing the algorithm is available at https://simtk.org/home/opt_muscle_par
Biofeedback for gait retraining based on real-time estimation of tibiofemoral joint contact forces
Biofeedback assisted rehabilitation and intervention technologies have the potential to modify clinically relevant biomechanics. Gait retraining has been used to reduce the knee adduction moment, a surrogate of medial tibiofemoral joint loading often used in knee osteoarthritis research. In this study we present an electromyogram-driven neuromusculoskeletal model of the lower-limb to estimate, in real-time, the tibiofemoral joint loads. The model included 34 musculotendon units spanning the hip, knee, and ankle joints. Full-body inverse kinematics, inverse dynamics, and musculotendon kinematics were solved in real-time from motion capture and force plate data to estimate the knee medial tibiofemoral contact force (MTFF). We analyzed 5 healthy subjects while they were walking on an instrumented treadmill with visual biofeedback of their MTFF. Each subject was asked to modify their gait in order to vary the magnitude of their MTFF. All subjects were able to increase their MTFF, whereas only 3 subjects could decrease it, and only after receiving verbal suggestions about possible gait modification strategies. Results indicate the important role of knee muscle activation patterns in modulating the MTFF. While this study focused on the knee, the technology can be extended to examine the musculoskeletal tissue loads at different sites of the human body
Biofeedback for gait retraining based on real-time estimation of tibiofemoral joint contact forces
Biofeedback assisted rehabilitation and intervention technologies have the potential to modify clinically relevant biomechanics. Gait retraining has been used to reduce the knee adduction moment, a surrogate of medial tibiofemoral joint loading often used in knee osteoarthritis research. In this study we present an electromyogram-driven neuromusculoskeletal model of the lower-limb to estimate, in real-time, the tibiofemoral joint loads. The model included 34 musculotendon units spanning the hip, knee, and ankle joints. Full-body inverse kinematics, inverse dynamics, and musculotendon kinematics were solved in real-time from motion capture and force plate data to estimate the knee medial tibiofemoral contact force (MTFF). We analyzed 5 healthy subjects while they were walking on an instrumented treadmill with visual biofeedback of their MTFF. Each subject was asked to modify their gait in order to vary the magnitude of their MTFF. All subjects were able to increase their MTFF, whereas only 3 subjects could decrease it, and only after receiving verbal suggestions about possible gait modification strategies. Results indicate the important role of knee muscle activation patterns in modulating the MTFF. While this study focused on the knee, the technology can be extended to examine the musculoskeletal tissue loads at different sites of the human body
Green composites of poly(3-hydroxybutyrate) containing graphene nanoplatelets with desirable electrical conductivity and oxygen barrier properties
Poly(3-hydroxybutyrate), a green polymer originating from prokaryotic microbes, has been used to prepare composites with graphene nanoplatelets (GnP) at different concentrations. The films were fabricated by drop-casting and were hot-pressed at a temperature lower than their melting point to provide the molecular chains enough energy to reorientate while avoiding melting and degradation. It was found that hot-pressing increases crystallinity and improves mechanical properties. The Young’s modulus increased from 1.2 to 1.6 GPa for the poly(3-hydroxybutyrate) (P(3HB)) films and from 0.5 to 2.2 GPa for the 15 wt % P(3HB)/GnP composites. Electrical resistivity decreases enormously with GnP concentration and hot-pressing, reaching 6 Ω sq–1 for the hot-pressed 30 wt % P(3HB)/GnP composite. Finally, the hot-pressed P(3HB) samples exhibit remarkable oxygen barrier properties, with oxygen permeability reaching 2800 mL μm m–2 day–1, which becomes 895 mL μm m–2 day–1 when 15% GnP is added to the biopolymer matrix, one of the lowest values known for biopolymers and biocomposites. We propose that these biocomposites are used for elastic packaging and electronics
Elucidating the role of matrix porosity and rigidity in glioblastoma type IV progression
The highly infiltrating nature of glioma cells is the major cause for the poor prognosis of brain malignancies. Motility, proliferation, and gene expression of cells in natural and synthetic gels have been analyzed by several authors, yet quantitative studies elucidating the role of matrix porosity and rigidity in the development of whole malignant masses are missing. Here, an experimental\u2010computational framework is introduced to analyze the behavior of U87\u2010MG cells and spheroids in compact hyaluronic acid gels (HA), replicating the brain parenchyma; and fibrous collagen gels (COL), resembling the organized structures of the brain. Experimentally it was observed that individual U87\u2010MG cells in COL assumed an elongated morphology within a few hours post inclusion (p.i.) and travelled longer distances than in HA. As spheroids, U87\u2010MG cells rapidly dispersed into COL resulting in infiltrating regions as large as tumor cores ( 48600 \u3bcm, at 8 days p.i.). Conversely, cells in HA originated smaller and denser infiltrating regions ( 48300 \u3bcm, at 8 days p.i.). Notably, COL tumor core size was only 20% larger than in HA, at longer time points. Computationally, by introducing for the first time the effects of matrix heterogeneity in our numerical simulations, the results confirmed that matrix porosity and its spatial organization are key factors in priming the infiltrating potential of these malignant cells. The experimental\u2010numerical synergy can be used to predict the behavior of neoplastic masses under diverse conditions and the efficacy of combination therapies simultaneously aiming at killing cancer cells and modulating the tumor microenvironment
Shaped defined-PLGA microparticles: therapeutic efficacy and tribological behavior in Osteoarthritis
Validation of a model-based inverse kinematics approach based on wearable inertial sensors
Wearable inertial measurement units (IMUs) are a promising solution to human motion estimation. Using IMUs 3D orientations, a model-driven inverse kinematics methodology to estimate joint angles is presented. Estimated joint angles were validated against encoder-measured kinematics (robot) and against marker-based kinematics (passive mechanism). Results are promising, with RMS angular errors respectively lower than 3 and 6 deg over a minimum range of motion of 50 deg (robot) and 160 deg (passive mechanism). Moreover, a noise robustness analysis revealed that the model-driven approach reduces the effects of experimental noises, making the proposed technique particularly suitable for application in human motion analysis
Graphene and polytetrafluoroethylene synergistically improve the tribological properties and adhesion of nylon 66 coatings
Abstract In this work, we exploit the bidimensional structure and high stiffness of graphene to improve the tribological response of nylon-based composites. Graphene nanoplatelets, coupled with polytetrafluoroethylene microparticles, synergistically improve the friction coefficient and wear rate, as well as the adhesion to the substrate. The enhancement, as high as threefold for both friction and wear rate at the optimal graphene concentration (0.5% in weight), depends upon the formation of a continuous, robust transfer film with the steel rubbing counterpart, as shown by Raman measurements. The graphene-nylon coating also shows three-fold improved adhesion to the underlying substrate, attributed to the high surface energy of graphene
fully solution processed conductive films based on colloidal copper selenide nanosheets for flexible electronics
A novel colloidal synthesis of copper selenide nanosheets (NSs) with lateral dimensions of up to 3 μm is developed. This material is used for the fabrication of flexible conductive films prepared via simple drop-casting of the NS dispersions without any additional treatment. The electrical performance of these coatings is benchmarked against copper selenide spherical nanocrystals (SNCs) in order to demonstrate the advantage of 2D morphology of the NSs for flexible electronics. In this contest, Cu2−xSe SNC films exhibit higher conductivity but lower reproducibility due to the formation of cracks leading to discontinuous films. Furthermore, the electrical properties of the films deposited on different flexible substrates following their bending, stretching and folding are studied. A comparison of Cu2−xSe SNC and CuSe NS films reveals an increased stability of the CuSe NS films under mechanical stress applied to the samples and their improved long-term stability in air
Tribological behavior of shape-specific microplate-enriched synovial fluids on a linear two-axis tribometer
Nano- and micro-particles are being increasingly used to tune interfacial frictional properties in diverse applications, from friction modifiers in industrial lubrication to enhanced biological fluids in human osteoarthritic joints. Here, we assessed the tribological properties of a simulated synovial fluid enriched with non-spherical, poly lactic-co-glycolic acid (PLGA) microparticles (μPL) that have been previously demonstrated for the pharmacological management of osteoarthritis (OA). Three different μPL configurations were fabricated presenting a 20 μm 20 μm square base and a thickness of 5 μm (thin, 5H μPL), 10 μm (10H μPL), and 20 μm (cubical, 20H μPL). After extensive morphological and physicochemical characterizations, the apparent Young’s modulus of the μPL was quantified under compressive loading returning an average value of 6 kPa, independently of the particle morphology. Then, using a linear two-axis tribometer, the static (μs) and dynamic (μd) friction coefficients of the μPL-enriched simulated synovial fluid were determined in terms of particle configuration and concentration, varying from 0 (fluid only) to 6105 μPL/mL. The particle morphology had a modest influence on friction, possibly because the μPL were fully squeezed between two mating surfaces by a 5.8 N normal load realizing boundary-like lubrication conditions. Differently, friction was observed to depend on the dimensionless parameter , defined as the ratio between the total volume of the μPL enriching the simulated synovial fluid and the volume of the fluid itself. Both coefficients of friction were documented to grow with reaching a plateau of μs 0.4 and μd 0.15, already at 210-3. Future investigations will have to systematically analyze the effect of sliding velocity, normal load, and rigidity of the mating surfaces to elucidate in full the tribological behavior of μPL in the context of osteoarthritis
- …