Full-length human placental sFlt-1-e15a isoform induces distinct maternal phenotypes of preeclampsia in mice

<div><p>Objective</p><p>Most anti-angiogenic preeclampsia models in rodents utilized the overexpression of a truncated soluble fms-like tyrosine kinase-1 (sFlt-1) not expressed in any species. Other limitations of mouse preeclampsia models included stressful blood pressure measurements and the lack of postpartum monitoring. We aimed to 1) develop a mouse model of preeclampsia by administering the most abundant human placental sFlt-1 isoform (hsFlt-1-e15a) in preeclampsia; 2) determine blood pressures in non-stressed conditions; and 3) develop a survival surgery that enables the collection of fetuses and placentas and postpartum (PP) monitoring.</p><p>Methods</p><p>Pregnancy status of CD-1 mice was evaluated with high-frequency ultrasound on gestational days (GD) 6 and 7. Telemetry catheters were implanted in the carotid artery on GD7, and their positions were verified by ultrasound on GD13. Mice were injected through tail-vein with adenoviruses expressing hsFlt-1-e15a (n = 11) or green fluorescent protein (GFP; n = 9) on GD8/GD11. Placentas and pups were delivered by cesarean section on GD18 allowing PP monitoring. Urine samples were collected with cystocentesis on GD6/GD7, GD13, GD18, and PPD8, and albumin/creatinine ratios were determined. GFP and hsFlt-1-e15a expression profiles were determined by qRT-PCR. Aortic ring assays were performed to assess the effect of hsFlt-1-e15a on endothelia.</p><p>Results</p><p>Ultrasound predicted pregnancy on GD7 in 97% of cases. Cesarean section survival rate was 100%. Mean arterial blood pressure was higher in hsFlt-1-e15a-treated than in GFP-treated mice (∆MAP = 13.2 mmHg, p = 0.00107; GD18). Focal glomerular changes were found in hsFlt-1-e15a -treated mice, which had higher urine albumin/creatinine ratios than controls (109.3±51.7μg/mg vs. 19.3±5.6μg/mg, p = 4.4x10^-2; GD18). Aortic ring assays showed a 46% lesser microvessel outgrowth in hsFlt-1-e15a-treated than in GFP-treated mice (p = 1.2x10^-2). Placental and fetal weights did not differ between the groups. One mouse with liver disease developed early-onset preeclampsia-like symptoms with intrauterine growth restriction (IUGR).</p><p>Conclusions</p><p>A mouse model of late-onset preeclampsia was developed with the overexpression of hsFlt-1-e15a, verifying the <i>in vivo</i> pathologic effects of this primate-specific, predominant placental sFlt-1 isoform. HsFlt-1-e15a induced early-onset preeclampsia-like symptoms associated with IUGR in a mouse with a liver disease. Our findings support that hsFlt-1-e15a is central to the terminal pathway of preeclampsia, and it can induce the full spectrum of symptoms in this obstetrical syndrome.</p></div

Reinforcement of natural rubber by silica/silane in dependence of different amine types

Diphenyl guanidine (DPG) is the most commonly used secondary accelerator in silica-reinforced rubber compounds because of its additional positive effect on the silanization reaction and deactivation of free silanol groups that are left over after the silanization. However, because of health and safety concerns about the use of DPG, which decomposes to give highly toxic aniline during high processing temperature, safe alternatives are required. This work investigates the effect of various types of aliphatic amines having alkyl or cyclic structures and similar pKa (i.e., hexylamine [HEX], decylamine [DEC], octadecylamine [OCT], cyclohexylamine [CYC], dicyclohexylamine [DIC], and quinuclidine [QUI]) on the properties of silica-reinforced natural rubber (NR) compounds by taking the ones with DPG and without amine as references. When compared with the compound without amine, the use of all amine types reduces filler–filler interaction (i.e., the Payne effect) and enhances filler–rubber interaction, as indicated by bound rubber content and decreased heat capacity increment. The amines with alkyl chains can reduce the Payne effect and enhance cure rate to a greater extent compared with the amines with cyclic rings as a result of better accessibility toward the silica surface and a shielding effect because of less steric hindrance. The longer carbon tails on linear aliphatic amines ranging from HEX, DEC, to OCT lead to a lower Payne effect, lower heat capacity increment, higher bound rubber content, and higher modulus as well as tensile strength. Overall, the use of OCT provides silica-reinforced NR compounds with properties closest to the reference one with DPG and can act as a potential alternative for DPG

Promoting interfacial compatibility of silica-reinforced natural rubber tire compounds by aliphatic amine

Octadecylamine (OCT) as an alternative for diphenyl guanidine (DPG) in silica-reinforced NR tire compounds with bis-(triethoxysilyl-propyl)tetrasulfide (TESPT) as silane coupling agent was investigated with focus on the improvement of compatibility between the silica surface and rubber molecules, by taking the amine-free rubber compound as a reference. The quantity of OCT and DPG was varied in a range of 2.4–9.5 mmol per 100 parts of rubber by weight (i.e., 0.5–2.5 phr). Bound rubber contents, changes in heat capacity (ΔCp), and immobilized polymer layer (χim) data prove an enhanced interfacial compatibility as the amines are absorbed on the polar silica surface and catalyze the silanization reaction. Comparing the two different amine types, the rubber compounds with OCT show higher interfacial compatibility than the ones with DPG, because of an additional shielding effect promoted by the long alkyl chain that leads to more hydrophobicity. Thus, the rubber compounds with OCT show higher physically bound rubber contents and consequently higher total bound rubber, a higher immobilized polymer layer, as well as a lower Payne effect. However, the compounds with OCT show a higher flocculation rate constant because the physical interactions between amine and silanol groups decrease under thermal treatment. The compounds with OCT show a lower cure torque difference that indicates a lower crosslink density, but because of the good interfacial interaction combining both chemical and physical interactions, the vulcanized rubber with OCT at optimum loading shows better mechanical properties and tan δ at 60 °C when compared with the DPG counterpart. At high (excessive) loading of amines, the compounds with DPG clearly have higher crosslink density and thus higher modulus as well as tensile strength compared with the use of OCT

Primary school pupils’ performances in understanding historical time

This study focuses on the development of the understanding of historical time of pupils in primary school. We present a developmental model with three stages: emergent, initial and continued understanding of historical time. Based on this model, we constructed an instrument to measure how pupils aged 6-12 perform. The participants were 1457 pupils from 7 Dutch primary schools. The analysis of the data showed that in all three stages pupils in higher grades significantly outperformed pupils in lower grades and that pupils’ performances were influenced by the variables gender and parents’ education. In all grades, there seemed to be room for improvement, especially in the lower grades (ages 6-9) where pupils have hardly had any teaching on the understanding of historical time. However, in the higher grades as well (ages 10-12), pupils could improve on the level of continued understanding of historical time

Reactivity of Bis[3-(triethoxysilyl)propyl] Tetrasulfide (TESPT) Silane Coupling Agent over Hydrated Silica: Operando IR Spectroscopy and Chemometrics Study

International audienc