116,397 research outputs found
The Behaviour of Finely Ground Bottom Ash in Portland Cement
The aim of this project was to assess the effects of finely ground MSWI bottom ash in Portland cement. Mortar mixes were prepared with 10% and 40% replacement of cement by ground IBA and then tested with regards to their material composition and engineering behaviour. IBA was found not to be inert, but showed some degree of reactivity. Replacement of cement with IBA was found to have no detrimental effects at low concentrations. This was not the case for 40% replacement, where cement replacement greatly affected strength, creep and drying shrinkage
Robust optimization for energy transactions in multi-microgrids under uncertainty
Independent operation of single microgrids (MGs) faces problems such as low self-consumption of local renewable energy, high operation cost and frequent power exchange with the grid. Interconnecting multiple MGs as a multi-microgrid (MMG) is an effective way to improve operational and economic performance. However, ensuring the optimal collaborative operation of a MMG is a challenging problem, especially under disturbances of intermittent renewable energy. In this paper, the economic and collaborative operation of MMGs is formulated as a unit commitment problem to describe the discrete characteristics of energy transaction combinations among MGs. A two-stage adaptive robust optimization based collaborative operation approach for a residential MMG is constructed to derive the scheduling scheme which minimizes the MMG operating cost under the worst realization of uncertain PV output. Transformed by its KKT optimality conditions, the reformulated model is efficiently solved by a column-and-constraint generation (C&CG) method. Case studies verify the effectiveness of the proposed model and evaluate the benefits of energy transactions in MMGs. The results show that the developed MMG operation approach is able to minimize the daily MMG operating cost while mitigating the disturbances of uncertainty in renewable energy sources. Compared to the non-interactive model, the proposed model can not only reduce the MMG operating cost but also mitigate the frequent energy interaction between the MMG and the grid
Evaluation of the EMC environment generated by a static var compensator
Describes an evaluation of the EMC environment generated by a static var compensator
First-principles calculations of a high-pressure synthesized compound PtC
First-principles density-functional method is used to study the recently
high-pressure synthesized compound PtC. It is confirmed by our calculations
that the platinum carbide has a zinc-blende ground-state phase at zero pressure
and the rock-salt structure is a high-pressure phase. The theoretical
transition pressure from zinc-blende to rock-salt is determined to be 52GPa.
Furthermore, our calculation shows the possibility that the experimentally
synthesized PtC by Ono et al. under high pressure condition might undergo a
transition from rock-salt structure to zinc-blende after the pressure quench to
ambient condition.Comment: A revised versio
The Effect of Co-Combusted Biomass-Coal Fly Ash on the Behaviour Portland Cement
This project has investigated the hydration behaviour of pfa-OPC blended cements, comparing conventional pfa with that obtained from co-firing of coal with biomass (palm kernel expeller). Calorimetry, thermal analysis and electron microscopy have been used to investigate the compositions and microstructures of the hydrated pastes. These have been used to explain the materials’ engineering properties (strength development and workability). The results showed that, in the short term, the behaviour of the co-fired material is comparable with that of conventional pfa, there being no discernable differences between the two systems
Out of plane effect on the superconductivity of Sr2-xBaxCuO3+y with Tc up to 98K
A series of new Sr2-xBaxCuO3+y (0 x 0.6) superconductors were prepared using
high-pressure and high-temperature synthesis. A Rietveld refinement based on
powder x-ray diffraction confirms that the superconductors crystallize in the
K2NiF4-type structure of a space group I4/mmm similar to that of La2CuO4 but
with partially occupied apical oxygen sites. It is found that the
superconducting transition temperature Tc of this Ba substituted Sr2CuO3+y
superconductor with constant carrier doping level, i.e., constant d, is
controlled not only by order/disorder of apical-O atoms but also by Ba content.
Tcmax =98 K is achieved in the material with x=0.6 that reaches the record
value of Tc among the single-layer copper oxide superconductors, and is higher
than Tc=95K of Sr2CuO3+y with optimally ordered apical-O atoms. There is
Sr-site disorder in Sr2-xBaxCuO3+y which might lead to a reduction of Tc. The
result indicates that another effect surpasses the disorder effect that is
related either to the increased in-plane Cu-O bond length or to elongated
apical-O distance due to Ba substitution with larger cation size. The present
experiment demonstrates that the optimization of local geometry out of the Cu-O
plane can dramatically enhance Tc in the cuprate superconductors.Comment: 23 Pages, 1 Table, 5 Figure
Medium modifications of the nucleon-nucleon elastic cross section in neutron-rich intermediate energy HICs
Several observables of unbound nucleons which are to some extent sensitive to
the medium modifications of nucleon-nucleon elastic cross sections in
neutron-rich intermediate energy heavy ion collisions are investigated. The
splitting effect of neutron and proton effective masses on cross sections is
discussed. It is found that the transverse flow as a function of rapidity, the
as a function of momentum, and the ratio of halfwidths of the
transverse to that of longitudinal rapidity distribution are very
sensitive to the medium modifications of the cross sections. The transverse
momentum distribution of correlation functions of two-nucleons does not yield
information on the in-medium cross section.Comment: 14 pages, 5 figure
- …