R134a flow patterns in small diameter tubes

R134a vapour-liquid two-phase flow patterns were studied in vertical small diameter tubes. The observed flow patterns include bubbly, dispersed bubble, slug, churn, annular and mist flow. Six integrated flow pattern maps, derived for two internal diameters (2.01 and 4.26 mm) and three different pressures (6.0, 10.0, 14.0 bar), are presented. Some transition boundaries, such as slug-churn and churn-annular, were found to be very sensitive to diameter and pressure. On the contrary, the boundaries of dispersed bubble-churn and bubbly-slug are less affected. The transition boundaries are compared with the existing models for normal size tubes showing significant differences

The effect of tube diameter on vertical two-phase flow regimes in small tubes

Flow boiling flow patterns in four circular tubes with internal diameters of 1.10, 2.01, 2.88 and 4.26 mm were investigated in the present project. The experiments were conducted in vertical upward two-phase flow using R134a as the working fluid. The observed flow patterns include dispersed bubble, bubbly, confined bubble, slug, churn, annular and mist flow. The flow characteristics in the 2.88 and 4.26 mm tubes are similar to those typically described in normal size tubes. The smaller diameter tubes, 1.10 and 2.01 mm, exhibit strong "small tube characteristics" as described in earlier studies. The sketched flow maps show that the transition boundaries of slug-churn and churn-annular depend strongly on diameter. On the contrary, the dispersed bubble to churn and bubbly to slug boundaries are less affected. The transition boundaries are compared with existing models for normal size tubes showing poor agreement

Vertical upward flow patterns in small diameter tubes

Two-phase flow patterns were studied in vertical small diameter tubes using R134a as the working fluid. The observed flow patterns include bubbly, dispersed bubble, confined bubble, slug, churn, annular and mist flow. Twelve flow pattern maps, derived from four internal diameters (1.10, 2.01, 2.88 and 4.26 mm) and three different pressures (6, 10, 14 bar), are presented. The flow patterns exhibit strong “small tube characteristics” described in earlier studies when the tube diameter is 2 mm or less. Slug-churn and churn-annular boundaries depend on diameter and pressure. Dispersed bubble-churn and bubbly-slug are less affected. The transition boundaries are compared with existing models for normal size tubes showing poor agreement. Various coordinate systems were considered for the flow maps. The results show that the Lockhard-Martinelli Parameter and mass flow flux can account for the effect of fluid pressure on flow patterns

The Mean Drift: Tailoring the Mean Field Theory of Markov Processes for Real-World Applications

The statement of the mean field approximation theorem in the mean field theory of Markov processes particularly targets the behaviour of population processes with an unbounded number of agents. However, in most real-world engineering applications one faces the problem of analysing middle-sized systems in which the number of agents is bounded. In this paper we build on previous work in this area and introduce the mean drift. We present the concept of population processes and the conditions under which the approximation theorems apply, and then show how the mean drift is derived through a systematic application of the propagation of chaos. We then use the mean drift to construct a new set of ordinary differential equations which address the analysis of population processes with an arbitrary size

A 0.45V continuous time-domain filter using asynchronous oscillator structures

This paper presents a novel oscillator based filter structure for processing time-domain signals with linear dynamics that extensively uses digital logic by construction. Such a mixed signal topology is a key component for allowing efficient processing of asynchronous time encoded signals that does not necessitate external clocking. A miniaturized primitive is introduced as analogue time-domain memory that can be modelled, synthesized, and incorporated in closed loop mixed signal accelerators to realize more complex linear or non-linear computational systems. This is contextualized by demonstrating a compact low power filter operating at 0.45 V in 65 nm CMOS. Simulation results are presented showing an excess of 50 dB dynamic range with a FOM of 7fJ/pole which promises an order of magnitude improvement on state-of-the-art filters in nanometre CMOS

A new modulation technique for high data rate low power UWB wireless optical communication in implantable biotelemetry systems

We report on the development of a novel modulation technique for UWB wireless optical communication systems for application in a transcutaneous biotelemetry. The solution, based on the generation of short laser pulses, allows for a high data rate link whilst achieving a significant power reduction (energy per bit) compared to the state-of-the-art. These features make this particularly suitable for emerging biomedical applications such as implantable neural/biosensor systems. The relatively simple architecture consists of a transmitter and receiver that can be integrated in a standard CMOS technology in a compact Silicon footprint. These parts include circuits for bias and drive current generation, conditioning and processing, optimised for low-volt age/low-power operation. Preliminary experimental findings validate the new paradigm and show good agreement with expected results. The complete system achieves a BER less than 10-7, with maximum data rate of 125Mbps and estimated total power consumption of less than 3mW

A 0.5V time-domain instrumentation circuit with clocked and unclocked ΔΣ operation

This paper presents a time-domain instrumentation circuit with exceptional noise efficiency directed at using nanometre CMOS for next generation neural interfaces. Current efforts to realize closed loop neuromodulation and high fidelity BMI prosthetics rely extensively on digital processing which is not well integrated with conventional analogue instrumentation. The proposed time-domain topology employs a differential ring oscillator that is put into feedback using a chopper stabilized low noise transconductor and capacitive feedback. This realization promises better digital integration by extensively using time encoded digital signals and seamlessly allows both clocked & unclocked ΔΣ behavior which is useful on-chip characterization and interfacing with synchronous systems. A 0.5V instrumentation system is implemented using a 65nm TSMC technology to realize a highly compact footprint that is 0.006mm2 in size. Simulation results demonstrate an excess of 55 dB dynamic range with 3.5 Vrms input referred noise for the given 810nW total system power budget corresponding to an NEF of 1.64

Effect of Alkyl Chain Length and Linker Atom on the Crystal Packing in 6,12-Dialkoxy- And 6,12-Dialkylsulfanyl-Benzo[1,2- b:4,5- b′]bis[ b]benzothiophenes

The effect of varying the chain length on the solid state conformation and packing of 6,12-dialkoxy- and 6,12-dialkylsulfanyl-benzo[1,2-b:4,5-b′]bis[b]benzothiophenes has been studied. The compounds were prepared by SNAr reaction of 6,12-difluorbenzo[1,2-b:4,5-b′]bis[b]benzothiophene with alkoxides or alkanethiolates derived from C7-C10 alcohols and alkanethiols. Single crystal X-ray diffraction analysis revealed that all but two compounds crystallize in the triclinic space group P1. Two compounds were obtained as monoclinic crystals with space group P21/c. The alkoxy substituted compounds adopted a molecular conformation with a step from the core and a gauche conformation about the C1′-C2′ bond placing the alkyl chains close to parallel with the pentacyclic arene ring system, whereas in the alkylsufanyl derivatives, the alkyl chains were arranged strongly deviated from the plane of the ring, with the sulfur atom antiperiplanar to C3′ of the alkyl chain. NMR measurement of T1 relaxation in CDCl3 showed both the alkoxy and alkylsulfanyl substituents to be freely rotating at ambient temperature in solution, indicating the orientation of the chains in the solid state was due to packing interactions during crystallization

Continuous-time micropower interface for neural recording applications

This paper presents a novel amplifier architecture intended for low power neural recording applications. By using continuous-time signal representation, the proposed topology predominantly leverages digital topologies taking advantage of efficient techniques used in time domain systems. This includes higher order feedback dynamics that allow direct analogue signal quantization and near ideal integrator structures for noise shaping. The system implemented in 0.18 μ m standard CMOS demonstrates the capability for low noise instrumentation with a bandwidth of 6 kHz and highly linear full dynamic range. Simulation results indicate 1.145 μW budget from 0.5 V supply voltage with an input referred thermal noise of 7.7 μVrms