Unambiguous Interpretation of Atomically Resolved Force Microscopy Images of an Insulator

The (111) surface of CaF2 was imaged with dynamic mode scanning force microscopy and modeledusing atomistic simulation. Both experiment and theory showed a clear triangular contrast pattern in images, and theory demonstrated that the contrast pattern is due to the interaction of a positive electrostatic potential tip with fluorine ions in the two topmost surface layers. We find a good agreement of position and relative height of scan line features between theory and experiment and thus establish for the first time an unambiguous identification of sublattices of an insulator imaged by force microscopy.Peer reviewe

Role of tip structure and surface relaxation in atomic resolution dynamic force microscopy: CaF2(111) as a reference surface

By combining experimental dynamic scanning force microscope (SFM) images of the CaF2(111) surface with an extensive theoretical modeling, we demonstrate that the two different contrast patterns obtained reproducibly on this surface can be clearly explained in terms of the change of the sign of the electrostatic potential at the tip end. We also present direct theoretical simulations of experimental dynamic SFM images of an ionic surface at different tip-surface distances. Experimental results demonstrate a qualitative transformation of the image pattern, which is fully reproduced by the theoretical modeling and is related to the character of tip-induced displacements of the surface atoms. The modeling of the image transformation upon a systematic reduction of the tip-surface distance with ionic tips allows an estimate of the tip-surface distance present in experiment, where 0.28–0.40 nm is found to be optimal for stable imaging with well-defined atomic contrast. We also compare the modeling with ionic tips to results for a pure silicon tip. This comparison demonstrates that a silicon tip can yield only one type of image contrast and that the tip-surface interaction is not strong enough to explain the image contrast observed experimentally. The proposed interpretation of two types of images for the CaF2(111) surface can also be used to determine the chemical identity of imaged features on other surfaces with similar structure.Peer reviewe

Atomic resolution force microscopy imaging on a strongly ionic surface with differently functionalized tips

金沢大学理工研究域数物科学系Three types of tips for noncontact atomic force microscopy imaging, namely, a silicon nanopillar tip, a carbon nanopillar tip, and a fluoride cluster tip, are prepared for atomic resolution imaging on the CaF2 (111) surface. The most enhanced atomic corrugation is obtained with the fluoride cluster tip prepared by gently touching the fluorite surface. Atom resolved images are much harder to obtain with the other tips. This demonstrates the importance of having a polar tip for atomic resolution imaging of an ionic surface and supports the general notion that a surface is best imaged with a tip of the same material. © 2010 American Vacuum Society

Tuning Molecular Self-Assembly on Bulk Insulator Surfaces by Anchoring of the Organic Building Blocks

Rahe P, Kittelmann M, Neff JL, et al. Tuning Molecular Self-Assembly on Bulk Insulator Surfaces by Anchoring of the Organic Building Blocks. Advances Materials. 2013;25(29):3948-3956.Molecular self-assembly constitutes a versatile strategy for creating functional structures on surfaces. Tuning the subtle balance between intermolecular and molecule-surface interactions allows structure formation to be tailored at the single-molecule level. While metal surfaces usually exhibit interaction strengths in an energy range that favors molecular self-assembly, dielectric surfaces having low surface energies often lack sufficient interactions with adsorbed molecules. As a consequence, application-relevant, bulk insulating materials pose significant challenges when considering them as supporting substrates for molecular self-assembly. Here, the current status of molecular self-assembly on surfaces of wide-bandgap dielectric crystals, investigated under ultrahigh vacuum conditions at room temperature, is reviewed. To address the major issues currently limiting the applicability of molecular self-assembly principles in the case of dielectric surfaces, a systematic discussion of general strategies is provided for anchoring organic molecules to bulk insulating materials

Biological activity of the essential oil of Kadsura longipedunculata (Schisandraceae) and its major components

Objectives The aim was to determine the chemical composition of the essential oil of Kadsura longipedunculata and the biological activity of the oil and its major components. Methods The essential oil from stem bark of Kadsura longipedunculata was analysed by capillary gas chromatography (GLC/FID) and gas chromatography–mass spectrometry (GLC/MS). The ability of the oil to reduce diphenylpicrylhydrazine (DPPH•) was used to evaluate the antioxidant activity. Inhibition of both lipoxygenase and prostaglandin E2 was used to assess the anti-inflammatory activity. Antimicrobial activity was studied in vitro against a range of bacteria and fungi using diffusion and microdilution methods. Inhibition of trypanosome proliferation was assessed using resazurin as vital stain. The in-vitro cytotoxicity of the essential oil on six human cancer cell lines (HepG2, MIA PaCa-2, HeLa, HL-60, MDA-MB-231 and SW-480) was examined using the MTT assay. Key findings Fifty compounds, representing 97.63% of total oil, were identified. δ-Cadinene (21.79%), camphene (7.27%), borneol (6.05%), cubenol (5.12%) and δ-cadinol (5.11%) were found to be the major components of the oil. The oil exerted a good antimicrobial activity against all Gram-positive bacteria tested, including methicillin-resistant Staphylococcus aureus and vancomycin-resistant Enterococcus faecalis. Streptococcus pyogenes and S. agalactiae were the most sensitive bacteria with a minimal inhibitory concentration (MIC) of 60 µg/ml oil. The essential oil showed a moderate fungicidal activity against yeasts, but it did not show any activity against Gram-negative bacteria. The essential oil showed a good trypanocidal activity in Trypanosoma b. brucei with an IC50 value of 50.52 ± 0.029 µg/ml. Radical scavenging activity had an IC50 value of 3.06 ± 0.79 mg/ml. 5-Lipoxygenase inhibition (IC50 = 38.58 µg/ml) and prostaglandin E2 production inhibition (28.82% at 25 µg/ml) accounted for anti-inflammatory activity of the oil. The oil exhibited some degree of cytotoxic activity against MIA PaCa-2, HepG-2 and SW-480 cell lines with IC50 values of 133.53, 136.96 and 136.62 µg/ml, respectively. The oil increased caspase 3/7 activity (an indicator of apoptosis) 2.5–4 fold in MIA Paca-2 cells. Camphene and borneol did not show antioxidant activity. However, both compounds exhibited some degree of antimicrobial, trypanocidal, anti-inflammatory and cytotoxic activity. Conclusions This investigation provided evidence for, and confirmed the efficacy of, K. longipedunculata, a traditionally used Chinese medicinal plant for the treatment of inflammation and infection

Transition Radiation Spectroscopy with Prototypes of the ALICE TRD

We present measurements of the transition radiation (TR) spectrum produced in an irregular radiator at different electron momenta. The data are compared to simulations of TR from a regular radiator.Comment: 4 pages, 5 Figures, Proceedings for "TRDs for the 3rd millennium" (Sept. 4-7, 2003, Bari, Italy

Distinct nonequilibrium plasma chemistry of C2 affecting the synthesis of nanodiamond thin films from C2H2 (1%)/H2/Ar-rich plasmas

6 pages, 5 figures, 6 tables.We show that the concentrations of the species C2 (X 1Σg+), C2 (a 3Πu), and C2H exhibit a significant increase when the argon content grows up to 95% in medium pressure (0.75 Torr) radio frequency (rf) (13.56 MHz) produced C2H2 (1%)/H2/Ar plasmas of interest for the synthesis of nanodiamond thin films within plasma enhanced chemical vapor deposition devices. In contrast, the concentrations of CH3 and C2H2 remain practically constant. The latter results have been obtained with an improved quasianalytic space–time-averaged kinetic model that, in addition, has allowed us to identify and quantify the relative importance of the different underlying mechanisms driving the nonequilibrium plasma chemistry of C2. The results presented here are in agreement with recent experimental results from rf CH4/H2/Ar-rich plasmas and suggest that the growth of nanodiamond thin films from hydrocarbon/Ar-rich plasmas is very sensitive to the contribution of C2 and C2H species from the plasma.This work was partially funded by CICYT (Spain) under a Ramón y Cajal project and under Project No. TIC2002- 03235. One of the authors (F.J.G.V.) acknowledges a Ramón y Cajal contract from the Spanish Ministry of Science and Technology (MCYT). One of the authors (J.M.A.) acknowledges partial support from CICYT (Spain) under Project No. MAT 2002-04085-C02-02.Peer reviewe

Thermal Properties of Graphene, Carbon Nanotubes and Nanostructured Carbon Materials

Recent years witnessed a rapid growth of interest of scientific and engineering communities to thermal properties of materials. Carbon allotropes and derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range - of over five orders of magnitude - from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. I review thermal and thermoelectric properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder. A special attention is given to the unusual size dependence of heat conduction in two-dimensional crystals and, specifically, in graphene. I also describe prospects of applications of graphene and carbon materials for thermal management of electronics.Comment: Review Paper; 37 manuscript pages; 4 figures and 2 boxe

The Depolarizing Action of GABA in Cultured Hippocampal Neurons Is Not Due to the Absence of Ketone Bodies

Two recent reports propose that the depolarizing action of GABA in the immature brain is an artifact of in vitro preparations in which glucose is the only energy source. The authors argue that this does not mimic the physiological environment because the suckling rats use ketone bodies and pyruvate as major sources of metabolic energy. Here, we show that availability of physiologically relevant levels of ketone bodies has no impact on the excitatory action of GABA in immature cultured hippocampal neurons. Addition of β-hydroxybutyrate (BHB), the primary ketone body in the neonate rat, affected neither intracellular calcium elevation nor membrane depolarizations induced by the GABA-A receptor agonist muscimol, when assessed with calcium imaging or perforated patch-clamp recording, respectively. These results confirm that the addition of ketone bodies to the extracellular environment to mimic conditions in the neonatal brain does not reverse the chloride gradient and therefore render GABA hyperpolarizing. Our data are consistent with the existence of a genuine “developmental switch” mechanism in which GABA goes from having a predominantly excitatory role in immature cells to a predominantly inhibitory one in adults