Macrosegregation in direct-chill casting of aluminium alloys

This is the post-print version of the final paper published in Progress in Materials Science. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2008 Elsevier B.V.Semi-continuous direct-chill (DC) casting holds a prominent position in commercial aluminium alloy processing, especially in production of large sized ingots. Macrosegregation, which is the non-uniform chemical composition over the length scale of a casting, is one of the major defects that occur during this process. The fact that macrosegregation is essentially unaffected by subsequent heat treatment (hence constitutes an irreversible defect) leaves us with little choice but to control it during the casting stage. Despite over a century of research in the phenomenon of macrosegregation in castings and good understanding of underlying mechanisms, the contributions of these mechanisms in the overall macrosegregation picture; and interplay between these mechanisms and the structure formation during solidification are still unclear. This review attempts to fill this gap based on the published data and own results. The following features make this review unique: results of computer simulations are used in order to separate the effects of different macrosegregation mechanisms. The issue of grain refining is specifically discussed in relation to macrosegregation. This report is structured as follows. Macrosegregation as a phenomenon is defined in the Introduction. In “Direct-chill casting – process parameters, solidification and structure patterns” section, direct-chill casting, the role of process parameters and the evolution of structural features in the as-cast billets are described. In “Macrosegregation in direct-chill casting of aluminium alloys” section, macrosegregation mechanisms are elucidated in a historical perspective and the correlation with DC casting process parameters and structural features are made. The issue of how to control macrosegregation in direct-chill casting is also dealt with in the same section. In “Role of grain refining” section, the effect of grain refining on macrosegregation is introduced, the current understanding is described and the contentious issues are outlined. The review is finished with conclusion remarks and outline for the future research.The Netherlands Institute for Metals Researc

Compressed television transmission: A market survey

NASA's compressed television transmission technology is described, and its potential market is considered; a market that encompasses teleconferencing, remote medical diagnosis, patient monitoring, transit station surveillance, as well as traffic management and control. In addition, current and potential television transmission systems and their costs and potential manufacturers are considered

Optical properties of MgCNi3MgCNi_3 in the normal state

We present the optical reflectance and conductivity spectra for non-oxide antiperovskite superconductor $MgCNi_{3}$ at different temperatures. The reflectance drops gradually over a large energy scale up to 33,000 cm$^{-1}$, with the presence of several wiggles. The reflectance has slight temperature dependence at low frequency but becomes temperature independent at high frequency. The optical conductivity shows a Drude response at low frequencies and four broad absorption features in the frequency range from 600 $cm^{-1}$ to 33,000 $cm^{-1}$. We illustrate that those features can be well understood from the intra- and interband transitions between different components of Ni 3d bands which are hybridized with C 2p bands. There is a good agreement between our experimental data and the first-principle band structure calculations.Comment: 4 pages, to be published in Phys. Rev.

Conduction mechanisms of epitaxial EuTiO3 thin films

To investigate leakage current density versus electric field characteristics, epitaxial EuTiO3 thin films were deposited on (001) SrTiO3 substrates by pulsed laser deposition and were post-annealed in a reducing atmosphere. This investigation found that conduction mechanisms are strongly related to temperature and voltage polarity. It was determined that from 50 to 150 K the dominant conduction mechanism was a space-charge-limited current under both negative and positive biases. From 200 to 300 K, the conduction mechanism shows Schottky emission and Fowler-Nordheim tunneling behaviors for the negative and positive biases, respectively. This work demonstrates that Eu3+ is one source of leakage current in EuTiO3 thin films.Comment: 17 pages,4 figures, conferenc

The Behaviour of Finely Ground Bottom Ash in Portland Cement

The aim of this project was to assess the effects of finely ground MSWI bottom ash in Portland cement. Mortar mixes were prepared with 10% and 40% replacement of cement by ground IBA and then tested with regards to their material composition and engineering behaviour. IBA was found not to be inert, but showed some degree of reactivity. Replacement of cement with IBA was found to have no detrimental effects at low concentrations. This was not the case for 40% replacement, where cement replacement greatly affected strength, creep and drying shrinkage

Impulse-induced localized nonlinear modes in an electrical lattice

Intrinsic localized modes, also called discrete breathers, can exist under certain conditions in one-dimensional nonlinear electrical lattices driven by external harmonic excitations. In this work, we have studied experimentally the efectiveness of generic periodic excitations of variable waveform at generating discrete breathers in such lattices. We have found that this generation phenomenon is optimally controlled by the impulse transmitted by the external excitation (time integral over two consecutive zerosComment: 5 pages, 8 figure