QM-8 final performance evaluation report: SEALS, volume 4

The Space Shuttle Redesigned Solid Rocket Motor (RSRM) static test of Qualification Motor-8 (QM-8) was conducted. The QM-8 test article was the fifth full-scale, full-duration test, and the third qualification motor to incorporate the redesigned case field joint and nozzle-to-case joint. This was the second static test conducted in the T-97 test facility, which is equipped with actuators for inducing external side loads to a 360 degree external tank (ET) attach ring during test motor operation, and permits heating/cooling of an entire motor. The QM-8 motor was cooled to a temperature which ensured that the maximum propellant mean bulk temperature (PMBT) of 40 F was achieved at firing. All test results are not included, but rather, the performance of the metal case, field joints, and nozzle-to-case joint is addressed. The involvement is studied of the Structural Applications and Structural Design Groups with the QM-8 test which includes: assembly procedures of the field and nozzle-to-case joints, joint leak check results, structural test results, and post-test inspection evaluations

X-Ray Microanalysis of Ca and K in Corn Bran and Oat Hulls

Oat hulls and dry-milled corn bran were loaded with calcium or potassium and made into either sectioned bulk specimens of intact tissue embedded in resin or into non-sectioned bulk specimens made from powdered-compressed tissue formed into disks without resin. Regression lines of X-ray count versus mineral concentration were similar for both Ca and K. X-ray count versus mineral concentration relationships were similar for intact oat hulls and powdered-compressed specimens of either oat hulls or corn bran. However, the relationship for intact corn bran embedded in resin was significantly different. While the reason for this difference is not known, the result emphasizes the importance of using a proper calibration matrix to relate mineral concentration in biological material with X-ray count values. The standard error in slope of the regression lines, 0.07 and 0.08 for corn bran and oat hull, respectively, embedded in aged epoxy resin suggest that X-ray counts from these specimens allow one to estimate Ca or K concentration with a standard deviation of ± 10%. X-ray counts of Ca, K, and Cl in specimens embedded in epoxy resin decreased to stable values approximately four weeks after the resin was cured

Carbon monoxide detector

A sensitive carbon monoxide detector, developed specifically for spacecraft use, is described. An instrument range of 0 to 60 ppm CO in air was devised. The fuel cell type detector is used as a highly sensitive electrolysis cell for electrochemically detecting gases. The concept of an electrochemical CO detector is discussed and the CO oxidation behavior in phosphoric and sulfuric acid electrolytes is reported

Contrasting patterns of climatic niche divergence in Trebouxia—A alade of lichen-forming algae.

Lichen associations are overwhelmingly supported by carbon produced by photosynthetic algal symbionts. These algae have diversified to occupy nearly all climates and continents; however, we have a limited understanding of how their climatic niches have evolved through time. Here we extend previous work and ask whether phylogenetic signal in, and the evolution of, climatic niche, varies across climatic variables, phylogenetic scales, and among algal lineages in Trebouxia—the most common genus of lichen-forming algae. Our analyses reveal heterogeneous levels of phylogenetic signal across variables, and that contrasting models of evolution underlie the evolution of climatic niche divergence. Together these analyses demonstrate the variable processes responsible for shaping climatic tolerance in Trebouxia, and provide a framework within which to better understand potential responses to climate change associated perturbations. Such predictions reveal a disturbing trend in which the pace at which modern climate change is proceeding will vastly exceed the rate at which Trebouxia climatic niches have previously evolved

A Hybrid Lagrangian Variation Method for Bose-Einstein Condensates in Optical Lattices

Solving the Gross--Pitaevskii (GP) equation describing a Bose--Einstein condensate (BEC) immersed in an optical lattice potential can be a numerically demanding task. We present a variational technique for providing fast, accurate solutions of the GP equation for systems where the external potential exhibits rapid varation along one spatial direction. Examples of such systems include a BEC subjected to a one--dimensional optical lattice or a Bragg pulse. This variational method is a hybrid form of the Lagrangian Variational Method for the GP equation in which a hybrid trial wavefunction assumes a gaussian form in two coordinates while being totally unspecified in the third coordinate. The resulting equations of motion consist of a quasi--one--dimensional GP equation coupled to ordinary differential equations for the widths of the transverse gaussians. We use this method to investigate how an optical lattice can be used to move a condensate non--adiabatically.Comment: 16 pages and 1 figur