40 research outputs found
Highly acid-durable carbon coated Co3O4 nanoarrays as efficient oxygen evolution electrocatalysts
Most oxygen evolution reaction (OER) electrocatalysts are not stable in corrosive acids. Even the expensive RuO2 or IrO2, the most acid-resistant oxides, can be dissolved at an oxidative potential. Herein, we realize that the failures of OER catalysts are mostly caused by the weak interface between catalysts and the substrates. Hence, the study of the interface structure between catalysts and substrates is critical. In this work, we observe that the cheap OER catalysts Co3O4 can be more durable than the state-of-the-art RuO2 if the interface quality is good enough. The Co3O4 nanosheets deposited on carbon paper (Co3O4/CP) is prepared by electroplating of Co-species and followed by a two-step calcination process. The 1st step occurs in vacuum in order to maintain the surface integrity of the carbon paper and converts Co-species to Co(II)O. The 2nd step is a calcination in ambient conditions which enables the complete transformation of Co(II)O to Co3O4 without degrading the mechanical strength of the Co3O4-CP interface. Equally important, an in situ formation of a layer of amorphous carbon on top of Co3O4 further enhances the OER catalyst stability. Therefore, these key advances make the Co3O4 catalyst highly active toward the OER in 0.5 M H2SO4 with a small overpotential (370 mV), to reach 10 mA/cm2. The observed long lifetime for 86.8 h at a constant current density of 100 mA/cm2, is among the best of the reported in literature so far, even longer than the state-of-art RuO2 on CP. Overall, our study provides a new insight and methodology for the construction of a high-performance and high stability OER electrocatalysts in corrosive acidic environments
Nuclear Importation of Mariner Transposases among Eukaryotes: Motif Requirements and Homo-Protein Interactions
Mariner-like elements (MLEs) are widespread transposable elements in animal genomes. They have been divided into at least five sub-families with differing host ranges. We investigated whether the ability of transposases encoded by Mos1, Himar1 and Mcmar1 to be actively imported into nuclei varies between host belonging to different eukaryotic taxa. Our findings demonstrate that nuclear importation could restrict the host range of some MLEs in certain eukaryotic lineages, depending on their expression level. We then focused on the nuclear localization signal (NLS) in these proteins, and showed that the first 175 N-terminal residues in the three transposases were required for nuclear importation. We found that two components are involved in the nuclear importation of the Mos1 transposase: an SV40 NLS-like motif (position: aa 168 to 174), and a dimerization sub-domain located within the first 80 residues. Sequence analyses revealed that the dimerization moiety is conserved among MLE transposases, but the Himar1 and Mcmar1 transposases do not contain any conserved NLS motif. This suggests that other NLS-like motifs must intervene in these proteins. Finally, we showed that the over-expression of the Mos1 transposase prevents its nuclear importation in HeLa cells, due to the assembly of transposase aggregates in the cytoplasm
Three non-autonomous signals collaborate for nuclear targeting of CrMYC2, a Catharanthus roseus bHLH transcription factor
<p>Abstract</p> <p>Background</p> <p>CrMYC2 is an early jasmonate-responsive bHLH transcription factor involved in the regulation of the expression of the genes of the terpenic indole alkaloid biosynthesis pathway in <it>Catharanthus roseus</it>. In this paper, we identified the amino acid domains necessary for the nuclear targeting of CrMYC2.</p> <p>Findings</p> <p>We examined the intracellular localization of whole CrMYC2 and of various deletion mutants, all fused with GFP, using a transient expression assay in onion epidermal cells. Sequence analysis of this protein revealed the presence of four putative basic nuclear localization signals (NLS). Assays showed that none of the predicted NLS is active alone. Further functional dissection of CrMYC2 showed that the nuclear targeting of this transcription factor involves the cooperation of three domains located in the C-terminal region of the protein. The first two domains are located at amino acid residues 454-510 and 510-562 and contain basic classical monopartite NLSs; these regions are referred to as NLS3 (KRPRKR) and NLS4 (EAERQRREK), respectively. The third domain, between residues 617 and 652, is rich in basic amino acids that are well conserved in other phylogenetically related bHLH transcription factors. Our data revealed that these three domains are inactive when isolated but act cooperatively to target CrMYC2 to the nucleus.</p> <p>Conclusions</p> <p>This study identified three amino acid domains that act in cooperation to target the CrMYC2 transcription factor to the nucleus. Further fine structure/function analysis of these amino acid domains will allow the identification of new NLS domains and will allow the investigation of the related molecular mechanisms involved in the nuclear targeting of the CrMYC2 bHLH transcription factor.</p
HOT AND COLD CYCLES FOR AFRICAN EMERGING SHARE IPO MARKET EVIDENCE FROM TUNISIA
ABSTRACT JEL Classification: C58, E37, G17. Contribution/ Originality This study has two contributions. First, it is one of few studies detecting IPO cycles and turning points of hot/cold periods for Tunisian share market. Second, with eight IPO activity measures, we use Markov switching models to detect IPOs cycles and test if these cycles are similar for different activity measures
Efficient electrochemical transformation of CO2 to C2/C3 chemicals on benzimidazole-functionalized copper surfaces
A simple and efficient catalyst, benzimidazole (BIMH)-modified copper foil, is developed to enhance the selective conversion of CO2 to C2/C3 products. The overall faradaic efficiency (FE) for CO2 reduction reaches 92.1% and the undesired hydrogen evolution reaction (HER) is lowered to a FE of 7% at −1.07 VRHE
Recommended from our members
Determination of band offsets at GaN/single-layer MoS2 heterojunction (vol 109, 032104, 2016)
We report the band alignment parameters of the GaN/single-layer (SL) MoS2 heterostructure where the GaN thin layer is grown by molecular beam epitaxy on CVD deposited SL-MoS2/c-sapphire. We confirm that the MoS2 is an SL by measuring the separation and position of room temperature micro-Raman E1 2g and A1g modes, absorbance, and micro-photoluminescence bandgap studies. This is in good agreement with HRTEM cross-sectional analysis. The determination of band offset parameters at the GaN/SL-MoS2 heterojunction is carried out by high-resolution X-ray photoelectron spectroscopy accompanying with electronic bandgap values of SL-MoS2 and GaN. The valence band and conduction band offset values are, respectively, measured to be 1.8660.08 and 0.5660.1 eV with type II band alignment. The determination of these unprecedented band offset parameters opens up a way to integrate 3D group III nitride materials with 2D transition metal dichalcogenide layers for designing and modeling of their heterojunction based electronic and photonic devices.We acknowledge the financial support from King
Abdulaziz City for Science and Technology (KACST) Grant
No. KACST TIC R2-FP-008 and baseline funding BAS/1/
1614-01-01 of the King Abdullah University of Science and
Technology (KAUST)
Bidentate Ligand-Passivated CsPbI3 Perovskite Nanocrystals for Stable Near-Unity Photoluminescence Quantum Yield and Efficient Red Light-Emitting Diodes
Although halide perovskite nanocrystals (NCs) are promising materials for optoelectronic devices, they suffer severely from chemical and phase instabilities. Moreover, the common capping ligands like oleic acid and oleylamine that encapsulate the NCs will form an insulating layer, precluding their utility in optoelectronic devices. To overcome these limitations, we develop a postsynthesis passivation process for CsPbI 3 NCs by using a bidentate ligand, namely 2,2′-iminodibenzoic acid. Our passivated NCs exhibit narrow red photoluminescence with exceptional quantum yield (close to unity) and substantially improved stability. The passivated NCs enabled us to realize red light-emitting diodes (LEDs) with 5.02% external quantum efficiency and 748 cd/m 2 luminance, surpassing by far LEDs made from the nonpassivated NCs
Single crystal hybrid perovskite field-effect transistors
The methylammonium lead halide perovskites have shown excellent optoelectronic properties but the field-effect transistors are much less studied. Here Yu et al. synthesize micrometer-thin crystals of perovskites with low surface contamination and make ambipolar transistor devices with high mobilities
Engineering Interfacial Charge Transfer in CsPbBr<sub>3</sub> Perovskite Nanocrystals by Heterovalent Doping
Since
compelling device efficiencies of perovskite solar cells
have been achieved, investigative efforts have turned to understand
other key challenges in these systems, such as engineering interfacial
energy-level alignment and charge transfer (CT). However, these types
of studies on perovskite thin-film devices are impeded by the morphological
and compositional heterogeneity of the films and their ill-defined
surfaces. Here, we use well-defined ligand-protected perovskite nanocrystals
(NCs) as model systems to elucidate the role of heterovalent doping
on charge-carrier dynamics and energy level alignment at the interface
of perovskite NCs with molecular acceptors. More specifically, we
develop an in situ doping approach for colloidal CsPbBr<sub>3</sub> perovskite NCs with heterovalent Bi<sup>3+</sup> ions by hot injection
to precisely tune their band structure and excited-state dynamics.
This synthetic method allowed us to map the impact of doping on CT
from the NCs to different molecular acceptors. Using time-resolved
spectroscopy with broadband capability, we clearly demonstrate that
CT at the interface of NCs can be tuned and promoted by metal ion
doping. We found that doping increases the energy difference between
states of the molecular acceptor and the donor moieties, subsequently
facilitating the interfacial CT process. This work highlights the
key variable components not only for promoting interfacial CT in perovskites,
but also for establishing a higher degree of precision and control
over the surface and the interface of perovskite molecular acceptors