95 research outputs found
VLBI observations of jupiter with the initial test station of LOFAR and the nancay decametric array
AIMS: To demonstrate and test the capability of the next generation of
low-frequency radio telescopes to perform high resolution observations across
intra-continental baselines. Jupiter's strong burst emission is used to perform
broadband full signal cross-correlations on time intervals of up to hundreds of
milliseconds. METHODS: Broadband VLBI observations at about 20 MHz on a
baseline of ~50000 wavelengths were performed to achieve arcsecond angular
resolution. LOFAR's Initial Test Station (LOFAR/ITS, The Netherlands) and the
Nancay Decametric Array (NDA, France) digitize the measured electric field with
12 bit and 14 bit in a 40 MHz baseband. The fine structure in Jupiter's signal
was used for data synchronization prior to correlation on the time-series data.
RESULTS: Strong emission from Jupiter was detected during snapshots of a few
seconds and detailed features down to microsecond time-scales were identified
in dynamic spectra. Correlations of Jupiter's burst emission returned strong
fringes on 1 ms time-scales over channels as narrow as a hundred kilohertz
bandwidth. CONCLUSIONS: Long baseline interferometry is confirmed at low
frequencies, in spite of phase shifts introduced by variations in ionospheric
propagation characteristics. Phase coherence was preserved over tens to
hundreds of milliseconds with a baseline of ~700 km. No significant variation
with time was found in the correlations and an estimate for the fringe
visibility of 1, suggested that the source was not resolved. The upper limit on
the source region size of Jupiter Io-B S-bursts corresponds to an angular
resolution of ~3 arcsec. Adding remote stations to the LOFAR network at
baselines up to thousand kilometers will provide 10 times higher resolution
down to an arcsecond.Comment: 6 pages, 4 figures. Nigl, A., Zarka, P., Kuijpers, J., Falcke, H.,
Baehren, L., VLBI observations of Jupiter with the Initial Test Station of
LOFAR and the Nancay Decametric Array, A&A, 471, 1099-1104, accepted on
31/05/200
New method for the time calibration of an interferometric radio antenna array
Digital radio antenna arrays, like LOPES (LOFAR PrototypE Station), detect
high-energy cosmic rays via the radio emission from atmospheric extensive air
showers. LOPES is an array of dipole antennas placed within and triggered by
the KASCADE-Grande experiment on site of the Karlsruhe Institute of Technology,
Germany. The antennas are digitally combined to build a radio interferometer by
forming a beam into the air shower arrival direction which allows measurements
even at low signal-to-noise ratios in individual antennas. This technique
requires a precise time calibration. A combination of several calibration steps
is used to achieve the necessary timing accuracy of about 1 ns. The group
delays of the setup are measured, the frequency dependence of these delays
(dispersion) is corrected in the subsequent data analysis, and variations of
the delays with time are monitored. We use a transmitting reference antenna, a
beacon, which continuously emits sine waves at known frequencies. Variations of
the relative delays between the antennas can be detected and corrected for at
each recorded event by measuring the phases at the beacon frequencies.Comment: 9 pages, 9 figures, 1 table, pre-print of article published in
Nuclear Inst. and Methods in Physics Research, A, available at:
http://www.sciencedirect.com/science/article/B6TJM-4Y9CF4B-4/2/37bfcb899a0f387d9875a5a0729593a
An air shower array for LOFAR: LORA
LOFAR is a new form of radio telescope which can detect radio emission from
air showers induced by very high-energy cosmic rays. It can also look for radio
emission from particle cascades on the Moon induced by ultra high-energy cosmic
rays or neutrinos. To complement the radio detection, we are setting up a small
particle detector array LORA (LOfar Radboud Air shower array) within an area of
m diameter in the LOFAR core. It will help in triggering and
confirming the radio detection of air showers with the LOFAR antennas. In this
paper, we present a short overview about LORA and discuss its current status.Comment: 10 pages (using article.cls), 6 figures, accepted for the proceedings
of 22nd European Cosmic Ray Symposium, 3-6 August 2010, Finlan
Air Shower Measurements with LOFAR
Air showers from cosmic rays emit short, intense radio pulses. LOFAR is a new
radio telescope, that is being built in the Netherlands and Europe. Designed
primarily as a radio interferometer, the core of LOFAR will have a high density
of radio antennas, which will be extremely well calibrated. This makes LOFAR a
unique tool for the study of the radio properties of single air showers.
Triggering on the radio emission from air showers means detecting a short
radio pulse and discriminating real events from radio interference. At LOFAR we
plan to search for pulses in the digital data stream - either from single
antennas or from already beam-formed data - and calculate several parameters
characterizing the pulse shape to pick out real events in a second stage. In
addition, we will have a small scintillator array to test and confirm the
performance of the radio only trigger.Comment: Proceedings of the ARENA 2008 workshop, to be published in NIM
The wavefront of the radio signal emitted by cosmic ray air showers
Analyzing measurements of the LOPES antenna array together with corresponding
CoREAS simulations for more than 300 measured events with energy above
eV and zenith angles smaller than , we find that the radio
wavefront of cosmic-ray air showers is of approximately hyperbolic shape. The
simulations predict a slightly steeper wavefront towards East than towards
West, but this asymmetry is negligible against the measurement uncertainties of
LOPES. At axis distances m, the wavefront can be approximated by
a simple cone. According to the simulations, the cone angle is clearly
correlated with the shower maximum. Thus, we confirm earlier predictions that
arrival time measurements can be used to study the longitudinal shower
development, but now using a realistic wavefront. Moreover, we show that the
hyperbolic wavefront is compatible with our measurement, and we present several
experimental indications that the cone angle is indeed sensitive to the shower
development. Consequently, the wavefront can be used to statistically study the
primary composition of ultra-high energy cosmic rays. At LOPES, the
experimentally achieved precision for the shower maximum is limited by
measurement uncertainties to approximately g/cm. But the simulations
indicate that under better conditions this method might yield an accuracy for
the atmospheric depth of the shower maximum, , better than
g/cm. This would be competitive with the established air-fluorescence
and air-Cherenkov techniques, where the radio technique offers the advantage of
a significantly higher duty-cycle. Finally, the hyperbolic wavefront can be
used to reconstruct the shower geometry more accurately, which potentially
allows a better reconstruction of all other shower parameters, too.Comment: accepted by JCA
- âŠ