The mechanical and material properties of elderly human articular cartilage subject to impact and slow loading

Copyright © 2013 IPEM. Published by Elsevier Ltd. All rights reserved.Peer reviewedPostprin

Impact testing to determine the mechanical properties of articular cartilage in isolation and on bone

The original publication is available at www.springerlink.comNon peer reviewedPostprin

EPR-based ghost imaging using a single-photon-sensitive camera

Correlated photon imaging, popularly known as ghost imaging, is a technique whereby an image is formed from light that has never interacted with the object. In ghost imaging experiments, two correlated light fields are produced. One of these fields illuminates the object, and the other field is measured by a spatially resolving detector. In the quantum regime, these correlated light fields are produced by entangled photons created by spontaneous parametric down-conversion. To date, all correlated photon ghost imaging experiments have scanned a single-pixel detector through the field of view to obtain spatial information. However, scanning leads to poor sampling efficiency, which scales inversely with the number of pixels, N, in the image. In this work, we overcome this limitation by using a time-gated camera to record the single-photon events across the full scene. We obtain high-contrast images, 90%, in either the image plane or the far field of the photon pair source, taking advantage of the Einstein–Podolsky–Rosen-like correlations in position and momentum of the photon pairs. Our images contain a large number of modes, >500, creating opportunities in low-light-level imaging and in quantum information processing

Sticky stuff : redefining bedform prediction in modern and ancient environments

This work was funded by the UK Natural Environment Research Council (NERC) under the COHBED project (NE/1027223/1). Paterson was funded by the Marine Alliance for Science and Technology for Scotland (MASTS).The dimensions and dynamics of subaqueous bedforms are well known for cohesionless sediments. However, the effect of physical cohesion imparted by cohesive clay within mixed sand-mud substrates has not been examined, despite its recognized influence on sediment stability. Here we present a series of controlled laboratory experiments to establish the influence of substrate clay content on subaqueous bedform dynamics within mixtures of sand and clay exposed to unidirectional flow. The results show that bedform dimensions and steepness decrease linearly with clay content, and comparison with existing predictors of bedform dimensions, established within cohesionless sediments, reveals significant over-prediction of bedform size for all but the lowermost clay contents examined. The profound effect substrate clay content has on bedform dimensions has a number of important implications for interpretation in a range of modern and ancient environments, including reduced roughness and bedform heights in estuarine systems and the often cited lack of large dune cross-sets in turbidites. The results therefore offer a step change in our understanding of bedform formation and dynamics in these, and many other, sedimentary environments.Publisher PDFPeer reviewe

Patients' internet use in New Zealand for information about medicines: Implications for policy and practice

BACKGROUND: The ubiquitous use of the internet sees patients increasingly look online for information about their medicines. OBJECTIVE: This study aimed to understand the use of internet to meet medicine information needs of a sample of New Zealand patients. METHOD: Using a descriptive exploratory approach 60 mental health and general medical adult patients at one large urban were interviewed. These semi-structured interviews were audio recorded, transcribed and coded for inductive thematic analysis. FINDINGS: This study found that the internet is frequently used to meet the medicines information needs of patients. Despite the ease of access to information on the internet patients need guidance to locate credible and trustworthy online resources. CONCLUSIONS: Implications from this study relate to both practice and policy, and include the need for health professionals to have enhanced communication skills as they become information brokers who provide supplementary, reliable sources of patient-centric medicines information. Having a New Zealand specific website that includes an extensive section on medicines is a policy recommendation of this study, as is identifying tools to readily identify patients’ needs and preferences for medicines information

Direct numerical simulation of a high-pressure hydrogen micromix combustor: flame structure and stabilisation mechanism

A high-pressure hydrogen micromix combustor has been investigated using direct numerical simulation with detailed chemistry to examine the flame structure and stabilisation mechanism. The configuration of the combustor was based on the design by Schefer [1], using numerical periodicity to mimic a large square array. A precursor simulation of an opposed jet-in-crossflow was first conducted to generate appropriate partially-premixed inflow boundary conditions for the subsequent reacting simulation. The resulting flame can be described as a predominantly-lean inhomogeneously-premixed lifted jet flame. Five main zones were identified: a jet mixing region, a core flame, a peripheral flame, a recirculation zone, and combustion products. The core flame, situated over the jet mixing region, was found to burn as a thin reaction front, responsible for over 85% of the total fuel consumption. The peripheral flame shrouded the core flame, had low mean flow with high turbulence, and burned at very lean conditions (in the distributed burning regime). It was shown that turbulent premixed flame propagation was an order-of-magnitude too slow to stabilise the flame at these conditions. Stabilisation was identified to be due to ignition events resulting from turbulent mixing of fuel from the jet into mean recirculation of very lean hot products. Ignition events were found to correlate with shear-driven Kelvin-Helmholtz vortices, and increased in likelihood with streamwise distance. At the flame base, isolated events were observed, which developed into rapidly burning flame kernels that were blown downstream. Further downstream, near-simultaneous spatially-distributed ignition events were observed, which appeared more like ignition sheets. The paper concludes with a broader discussion that considers generalising from the conditions considered here

Effectiveness of cognitive-behavioural therapy for depression in advanced cancer: CanTalk randomised controlled trial

BACKGROUND: Depression is one of the most common mental disorders in people with advanced cancer. Although cognitive-behavioural therapy (CBT) has been shown to be effective for depression in people with cancer, it is unclear whether this is the case for people with advanced cancer and depression. // AIMS: We sought to determine whether CBT is more clinically effective than treatment as usual (TAU) for treating depression in people with advanced cancer (trial registration number ISRCTN07622709). // METHOD: A multi-centre, parallel-group single-blind randomised controlled trial comparing TAU with CBT (plus TAU). Participants (n = 230) with advanced cancer and depression were randomly allocated to (a) up to 12 sessions of individual CBT or (b) TAU. The primary outcome measure was the Beck Depression Inventory-II (BDI-II). Secondary outcome measures included the Patient Health Questionnaire-9, the Eastern Cooperative Oncology Group Performance Status, and Satisfaction with Care. // RESULTS: Multilevel modelling, including complier-average intention-to-treat analysis, found no benefit of CBT. CBT delivery was proficient, but there was no treatment effect (-0.84, 95% CI -2.76 to 1.08) or effects for secondary measures. Exploratory subgroup analysis suggested an effect of CBT on the BDI-II in those widowed, divorced or separated (-7.21, 95% CI -11.15 to -3.28). // CONCLUSIONS: UK National Institute for Health and Care Excellence (NICE) guidelines recommend CBT for treating depression. Delivery of CBT through the Improving Access to Psychological Therapies (IAPT) programme has been advocated for long-term conditions such as cancer. Although it is feasible to deliver CBT through IAPT proficiently to people with advanced cancer, this is not clinically effective. CBT for people widowed, divorced or separated needs further exploration. Alternate models of CBT delivery may yield different results. // DECLARATION OF INTEREST: M.S. is a member of the Health Technology Assessment General Board

The effects of graded levels of calorie restriction : I. impact of short term calorie and protein restriction on body composition in the C57BL/6 mouse

We acknowledge the BSU staff for their invaluable help with caring for the animals and anonymous referees for their inputs. The work was supported by the Biotechnology and Biological Sciences Research Council (BBSRC) of the UK (Standard grant BB/G009953/1 and China partnering award BB/JO20028/1). The authors declare no competing interests.Peer reviewedPublisher PD

Non-immortalized human tenocyte cultures as a vehicle for understanding cellular aspects to tendinopathy

The biochemical mechanisms underlying tendinopathy are obscure. We briefly describe preliminary observations of human tenocyte behaviour in culture as a vehicle for determining the role of reactive oxygen in tendon patholog

Finite element analysis of the effect of fibre shape on stresses in an elastic fibre surrounded

The finite element (FE) method was used to calculate the axial and radial stress distributions as a function of axial distance, z, from the centre, and radius, r, in an elastic fibre surrounded by a plastic matrix. Plastic deformation of the matrix was considered to exert a uniform interfacial stress, τ , along half the length of the fibre. Axisymmetric models were created for uniform cylindrical, ellipsoidal, paraboloidal and conical fibres characterised by an axial ratio, q, and half length, L. Young's modulus for the material of the fibre and L were arbitrarily assigned values of unity, since they act as scaling factors; q also acts as a scaling factor but was assigned a value of 10 to create models with a fibrous appearance. For the cylindrical fibre, the axial stress increased linearly from the end towards the centre; the radial stress was more evenly distributed. At the other extreme, the conical fibre showed a uniform distribution of axial and radial stress. Results for ellipsoidal and paraboloidal fibres were intermediate between these two extremes. In general, the effect of taper is to lower peak stress at the fibre centre and make the stress distribution throughout the fibre more even. These results are in good agreement with recent analytical theories for the axial distribution of surface radial stress and axial stress along the fibre axis. However, FE models have the advantage of predicting full three-dimensional stress distributions. C 2000 Kluwer Academic Publisher