Relaxation oscillations and negative strain rate sensitivity in the Portevin - Le Chatelier effect

A characteristic feature of the Portevin - Le Chatelier effect or the jerky flow is the stick-slip nature of stress-strain curves which is believed to result from the negative strain rate dependence of the flow stress. The latter is assumed to result from the competition of a few relevant time scales controlling the dynamics of jerky flow. We address the issue of time scales and its connection to the negative strain rate sensitivity of the flow stress within the framework of a model for the jerky flow which is known to reproduce several experimentally observed features including the negative strain rate sensitivity of the flow stress. We attempt to understand the above issues by analyzing the geometry of the slow manifold underlying the relaxational oscillations in the model. We show that the nature of the relaxational oscillations is a result of the atypical bent geometry of the slow manifold. The analysis of the slow manifold structure helps us to understand the time scales operating in different regions of the slow manifold. Using this information we are able to establish connection with the strain rate sensitivity of the flow stress. The analysis also helps us to provide a proper dynamical interpretation for the negative branch of the strain rate sensitivity.Comment: 7 figures, To appear in Phys. Rev.

Missing physics in stick-slip dynamics of a model for peeling of an adhesive tape

It is now known that the equations of motion for the contact point during peeling of an adhesive tape mounted on a roll introduced earlier are singular and do not support dynamical jumps across the two stable branches of the peel force function. By including the kinetic energy of the tape in the Lagrangian, we derive equations of motion that support stick-slip jumps as a natural consequence of the inherent dynamics. In the low mass limit, these equations reproduce solutions obtained using a differential-algebraic algorithm introduced for the earlier equations. Our analysis also shows that mass of the ribbon has a strong influence on the nature of the dynamics.Comment: Accepted for publication in Phys. Rev. E (Rapid Communication

The influence of spectral solar irradiance data on stratospheric heating rates during the 11 year solar cycle

Heating rate calculations with the FUBRad shortwave (SW) radiation parameterization have been performed to examine the effect of prescribed spectral solar fluxes from the NRLSSI, MPS and IUP data sets on SW heating rates over the 11 year solar cycle 22. The corresponding temperature response is derived from perpetual January General Circulation Model (GCM) simulations with prescribed ozone concentrations. The different solar flux input data sets induce clear differences in SW heating rates at solar minimum, with the established NRLSSI data set showing the smallest solar heating rates. The stronger SW heating in the middle and upper stratosphere in the MPS data warms the summer upper stratosphere by 2 K. Over the solar cycle, SW heating rate differences vary up to 40% between the irradiance data sets, but do not result in a significant change of the solar temperature signal. Lower solar fluxes in the newer SIM data lead to a significantly cooler stratosphere and mesosphere when compared to NRLSSI data for 2007. Changes in SW heating from 2004 to 2007 are however up to six times stronger than for the NRLSSI data. Key Points: - Solar minimum and solar cycle differences in SW heating rates and temperature - Comparison of three spectral solar input data sets for solar cycle 22 - Comparison of the newly compiled SORCE-data with the commonly used NRLSSI-dat

Dynamics of stick-slip in peeling of an adhesive tape

We investigate the dynamics of peeling of an adhesive tape subjected to a constant pull speed. We derive the equations of motion for the angular speed of the roller tape, the peel angle and the pull force used in earlier investigations using a Lagrangian. Due to the constraint between the pull force, peel angle and the peel force, it falls into the category of differential-algebraic equations requiring an appropriate algorithm for its numerical solution. Using such a scheme, we show that stick-slip jumps emerge in a purely dynamical manner. Our detailed numerical study shows that these set of equations exhibit rich dynamics hitherto not reported. In particular, our analysis shows that inertia has considerable influence on the nature of the dynamics. Following studies in the Portevin-Le Chatelier effect, we suggest a phenomenological peel force function which includes the influence of the pull speed. This reproduces the decreasing nature of the rupture force with the pull speed observed in experiments. This rich dynamics is made transparent by using a set of approximations valid in different regimes of the parameter space. The approximate solutions capture major features of the exact numerical solutions and also produce reasonably accurate values for the various quantities of interest.Comment: 12 pages, 9 figures. Minor modifications as suggested by refere

Chaos or Noise - Difficulties of a Distinction

In experiments, the dynamical behavior of systems is reflected in time series. Due to the finiteness of the observational data set it is not possible to reconstruct the invariant measure up to arbitrary fine resolution and arbitrary high embedding dimension. These restrictions limit our ability to distinguish between signals generated by different systems, such as regular, chaotic or stochastic ones, when analyzed from a time series point of view. We propose to classify the signal behavior, without referring to any specific model, as stochastic or deterministic on a certain scale of the resolution $\epsilon$, according to the dependence of the $(\epsilon,\tau)$-entropy, $h(\epsilon, \tau)$, and of the finite size Lyapunov exponent, $\lambda(\epsilon)$, on $\epsilon$.Comment: 24 pages RevTeX, 9 eps figures included, two references added, minor corrections, one section has been split in two (submitted to PRE

Multifractal burst in the spatio-temporal dynamics of jerky flow

The collective behavior of dislocations in jerky flow is studied in Al-Mg polycrystalline samples subjected to constant strain rate tests. Complementary dynamical, statistical and multifractal analyses are carried out on the stress-time series recorded during jerky flow to characterize the distinct spatio-temporal dynamical regimes. It is shown that the hopping type B and the propagating type A bands correspond to chaotic and self-organized critical states respectively. The crossover between these types of bands is identified by a large spread in the multifractal spectrum. These results are interpreted on the basis of competing scales and mechanisms.Comment: 4 pages, 6 figures To be published in Phys. Rev. Lett. (2001

Force-matched embedded-atom method potential for niobium

Large-scale simulations of plastic deformation and phase transformations in alloys require reliable classical interatomic potentials. We construct an embedded-atom method potential for niobium as the first step in alloy potential development. Optimization of the potential parameters to a well-converged set of density-functional theory (DFT) forces, energies, and stresses produces a reliable and transferable potential for molecular dynamics simulations. The potential accurately describes properties related to the fitting data, and also produces excellent results for quantities outside the fitting range. Structural and elastic properties, defect energetics, and thermal behavior compare well with DFT results and experimental data, e.g., DFT surface energies are reproduced with less than 4% error, generalized stacking-fault energies differ from DFT values by less than 15%, and the melting temperature is within 2% of the experimental value.Comment: 17 pages, 13 figures, 7 table

Brand new second hand : upgrading of a block of flats (b.1956) through energy efficient renovation

This paper presents a study for the renovation of a 50 year old, 8 floors high apartment building, in Graz, Austria. In this project different measures, concerning energy performance, design and comfort for the user, are united in one concept. Several upgrading steps are tuned to each other, each to carry its part of the total energy reduction. Lowering the heat loss in general during the heating season and the use of local energy resources like solar radiation, it is nowadays possible to reduce the energy consumption of the entire building to passive-house standard. In this case the fossil energy reduction in the end is more than 80 % and the reduction of CO2-emissions proportional. In this approach the block of flats becomes more flexible to different situations of living, more space and comfort for the occupants is offered and the building is transformed with a new upto-date design. Compared with a new building, construction costs and primary energy use are reduced. This result means not only maintaining the value of the real estate for the owner, but also increasing it

A dynamical approach to the spatiotemporal aspects of the Portevin-Le Chatelier effect: Chaos,turbulence and band propagation

Experimental time series obtained from single and poly-crystals subjected to a constant strain rate tests report an intriguing dynamical crossover from a low dimensional chaotic state at medium strain rates to an infinite dimensional power law state of stress drops at high strain rates. We present results of an extensive study of all aspects of the PLC effect within the context a model that reproduces this crossover. A study of the distribution of the Lyapunov exponents as a function of strain rate shows that it changes from a small set of positive exponents in the chaotic regime to a dense set of null exponents in the scaling regime. As the latter feature is similar to the GOY shell model for turbulence, we compare our results with the GOY model. Interestingly, the null exponents in our model themselves obey a power law. The configuration of dislocations is visualized through the slow manifold analysis. This shows that while a large proportion of dislocations are in the pinned state in the chaotic regime, most of them are at the threshold of unpinning in the scaling regime. The model qualitatively reproduces the different types of deformation bands seen in experiments. At high strain rates where propagating bands are seen, the model equations are reduced to the Fisher-Kolmogorov equation for propagative fronts. This shows that the velocity of the bands varies linearly with the strain rate and inversely with the dislocation density, consistent with the known experimental results. Thus, this simple dynamical model captures the complex spatio-temporal features of the PLC effect.Comment: 17 pages, 18 figure

Effects of crack tip geometry on dislocation emission and cleavage: A possible path to enhanced ductility

We present a systematic study of the effect of crack blunting on subsequent crack propagation and dislocation emission. We show that the stress intensity factor required to propagate the crack is increased as the crack is blunted by up to thirteen atomic layers, but only by a relatively modest amount for a crack with a sharp 60$^\circ$ corner. The effect of the blunting is far less than would be expected from a smoothly blunted crack; the sharp corners preserve the stress concentration, reducing the effect of the blunting. However, for some material parameters blunting changes the preferred deformation mode from brittle cleavage to dislocation emission. In such materials, the absorption of preexisting dislocations by the crack tip can cause the crack tip to be locally arrested, causing a significant increase in the microscopic toughness of the crack tip. Continuum plasticity models have shown that even a moderate increase in the microscopic toughness can lead to an increase in the macroscopic fracture toughness of the material by several orders of magnitude. We thus propose an atomic-scale mechanism at the crack tip, that ultimately may lead to a high fracture toughness in some materials where a sharp crack would seem to be able to propagate in a brittle manner. Results for blunt cracks loaded in mode II are also presented.Comment: 12 pages, REVTeX using epsfig.sty. 13 PostScript figures. Final version to appear in Phys. Rev. B. Main changes: Discussion slightly shortened, one figure remove